UWP apps do not have a console attached so any output to stdout/stderr
is lost. Therefore, provide a default BH_VPRINTF in that case for debug
builds which redirects output to the debugger.
To allow anything to depend on WASI types, including platform-specific
data structures, move the WASI libc filesystem/clock interface into
`platform_api_extension.h`, which leaves just WASI types in
`platform_wasi.h`. And `platform_wasi.h` has been renamed to
`platform_wasi_types.h` to reflect that it only defines types now and no
function declarations. Finally, these changes allow us to remove the
`windows_fdflags` type which was essentially a duplicate of
`__wasi_fdflags_t`.
Most of the WASI filesystem tests require at least creating/deleting a
file to test filesystem functionality so some additional filesystem APIs
have been implemented on Windows so we can test what has been
implemented so far. For those WASI functions which haven't been
implemented, we skip the tests. These will be implemented in a future PR
after which we can remove the relevant filters.
Additionally, in order to run the WASI socket and thread tests, we need
to install the wasi-sdk in CI and build the test source code prior to
running the tests.
Implement the necessary os_ filesystem functions to enable successful
WASI initialization on Windows. Some small changes were also required to
the sockets implementation to use the new windows_handle type. The
remaining functions will be implemented in a future PR.
To allow non-POSIX platforms such as Windows to support WASI libc
filesystem functionality, create a set of wrapper functions which provide a
platform-agnostic interface to interact with the host filesystem. For now,
the Windows implementation is stubbed but this will be implemented
properly in a future PR. There are no functional changes in this change,
just a reorganization of code to move any direct POSIX references out of
posix.c in the libc implementation into posix_file.c under the shared
POSIX sources.
See https://github.com/bytecodealliance/wasm-micro-runtime/issues/2495 for a
more detailed overview of the plan to port the WASI libc filesystem to Windows.
This PR adds the Cosmopolitan Libc platform enabling compatibility with multiple
x86_64 operating systems with the same binary. The platform is similar to the
Linux platform, but for now only x86_64 with interpreter modes are supported.
The only major change to the core is `posix.c/convert_errno()` was rewritten to use
a switch statement. With Cosmopolitan errno values depend on the currently
running operating system, and so they are non-constant and cannot be used in array
designators. However, the `cosmocc` compiler allows non-constant case labels in
switch statements, enabling the new version.
And updated wamr-test-suites script to add `-j <platform>` option. The spec tests
can be ran via `CC=cosmocc ./test_wamr.sh -j cosmopolitan -t classic-interp`
or `CC=cosmocc ./test_wamr.sh -j cosmopolitan -t fast-interp`.
The CI might use clang-17 to build iwasm for Android platform and it may
report compilation error:
https://github.com/bytecodealliance/wasm-micro-runtime/actions/runs/6308980430/job/17128073777
/home/runner/work/wasm-micro-runtime/wasm-micro-runtime/core/iwasm/libraries/libc-wasi/sandboxed-system-primitives/src/blocking_op.c:45:19: error: call to undeclared function 'preadv'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
ssize_t ret = preadv(fd, iov, iovcnt, offset);
^
Explicitly declare preadv and pwritev in android platform header file to resolve it.
Send a signal whose handler is no-op to a blocking thread to wake up
the blocking syscall with either EINTR equivalent or partial success.
Unlike the approach taken in the `dev/interrupt_block_insn` branch (that is,
signal + longjmp similarly to `OS_ENABLE_HW_BOUND_CHECK`), this PR
does not use longjmp because:
* longjmp from signal handler doesn't work on nuttx
refer to https://github.com/apache/nuttx/issues/10326
* the singal+longjmp approach may be too difficult for average programmers
who might implement host functions to deal with
See also https://github.com/bytecodealliance/wasm-micro-runtime/issues/1910
Remove thread local attribute of prev_sig_act_SIGSEGV/SIGBUS to allow using
custom signal handler from non-main thread since in a thread spawned by
embedder, embedder may be unable to call wasm_runtime_init_thread_env to
initialize them.
And fix the handling of prev_sig_act when its sa_handler is SIG_DFL, SIG_IGN,
or a user customized handler.
And return ENOSYS. We do that so we can at least compile the code on CI.
We'll be gradually enabling more and more functions.
Also, enabled `proc_raise()` for windows.
esp32-s3's instruction memory and data memory can be accessed through mutual mirroring way,
so we define a new feature named as WASM_MEM_DUAL_BUS_MIRROR.
Build wasi-libc library on Windows since libuv may be not supported. This PR is a first step
to make it working, but there's still a number of changes to get it fully working.
Compilation in strict mode fails with
```
wasm_micro_runtime/core/shared/platform/android/platform_init.c:122:30:
error: declaration of 'struct epoll_event` will not be visible outside of this
function [-Werror,-Wvisibility]
epoll_pwait(int epfd, struct epoll_event *events, int maxevents, int timeout,
^
1 error generated.
```
Co-authored-by: Misha Gridnev <gridman@google.com>
Writing GS segment register is not allowed on linux-sgx since it is used as
the base address of thread data in 64-bit hw mode. Reported in #2252.
Disable writing it and disable segue optimization for linux-sgx platform.
LLVM PGO (Profile-Guided Optimization) allows the compiler to better optimize code
for how it actually runs. This PR implements the AOT static PGO, and is tested on
Linux x86-64 and x86-32. The basic steps are:
1. Use `wamrc --enable-llvm-pgo -o <aot_file_of_pgo> <wasm_file>`
to generate an instrumented aot file.
2. Compile iwasm with `cmake -DWAMR_BUILD_STATIC_PGO=1` and run
`iwasm --gen-prof-file=<raw_profile_file> <aot_file_of_pgo>`
to generate the raw profile file.
3. Run `llvm-profdata merge -output=<profile_file> <raw_profile_file>`
to merge the raw profile file into the profile file.
4. Run `wamrc --use-prof-file=<profile_file> -o <aot_file> <wasm_file>`
to generate the optimized aot file.
5. Run the optimized aot_file: `iwasm <aot_file>`.
The test scripts are also added for each benchmark, run `test_pgo.sh` under
each benchmark's folder to test the AOT static pgo.
Segue is an optimization technology which uses x86 segment register to store
the WebAssembly linear memory base address, so as to remove most of the cost
of SFI (Software-based Fault Isolation) base addition and free up a general
purpose register, by this way it may:
- Improve the performance of JIT/AOT
- Reduce the footprint of JIT/AOT, the JIT/AOT code generated is smaller
- Reduce the compilation time of JIT/AOT
This PR uses the x86-64 GS segment register to apply the optimization, currently
it supports linux and linux-sgx platforms on x86-64 target. By default it is disabled,
developer can use the option below to enable it for wamrc and iwasm(with LLVM
JIT enabled):
```bash
wamrc --enable-segue=[<flags>] -o output_file wasm_file
iwasm --enable-segue=[<flags>] wasm_file [args...]
```
`flags` can be:
i32.load, i64.load, f32.load, f64.load, v128.load,
i32.store, i64.store, f32.store, f64.store, v128.store
Use comma to separate them, e.g. `--enable-segue=i32.load,i64.store`,
and `--enable-segue` means all flags are added.
Acknowledgement:
Many thanks to Intel Labs, UC San Diego and UT Austin teams for introducing this
technology and the great support and guidance!
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Co-authored-by: Vahldiek-oberwagner, Anjo Lucas <anjo.lucas.vahldiek-oberwagner@intel.com>
Add nightly (UTC time) checks with asan and ubsan, and also put gcc-4.8 build
to nightly run since we don't need to run it with every PR.
Co-authored-by: Maksim Litskevich <makslit@amazon.co.uk>
In #1928 we added support for GCC 4.8 but we don't continuously test if it's
working. This PR added a GitHub actions job to test compilation on GCC 4.8
for interpreters and Fast JIT (LLVM JIT/AOT might be added in the future).
The compilation is done using ubuntu 14.04 image as that's the simplest way
to get GCC 4.8 compiler. The job only compiles the code but does not run any
tests.
Use the shared memory's shared_mem_lock to lock the whole atomic.wait and
atomic.notify processes, and use it for os_cond_reltimedwait and os_cond_notify,
so as to make the whole processes actual atomic operations:
the original implementation accesses the wait address with shared_mem_lock
and uses wait_node->wait_lock for os_cond_reltimedwait, which is not an atomic
operation.
And remove the unnecessary wait_map_lock and wait_lock, since the whole
processes are already locked by shared_mem_lock.
- Implement atomic.fence to ensure a proper memory synchronization order
- Destroy exec_env_singleton first in wasm/aot deinstantiation
- Change terminate other threads to wait for other threads in
wasm_exec_env_destroy
- Fix detach thread in thread_manager_start_routine
- Fix duplicated lock cluster->lock in wasm_cluster_cancel_thread
- Add lib-pthread and lib-wasi-threads compilation to Windows CI
The function always specified IPv4 socklen to sockaddr_to_bh_sockaddr(),
therefore the assertion was failing; however, sockaddr_to_bh_sockaddr()
never actually used socklen parameter, so we deleted it completely.
In the previous code, the `*port` is assigned before `getsockname`, so the caller
may be not able to get the actual port number assigned by system.
Move the assigning of `*port` to be after `getsockname` to resolve the issue.
The problem was found by a `Golang + WAMR (as CGO)` wrapped by EGO
in SGX Enclave.
`fstat()` in EGO returns dummy values:
- EGO uses a `mount` configuration to define the mount points that apply
the host file system presented to the Encalve.
- EGO has a different programming model: the entire application runs inside
the enclave. Manual ECALLs/OCALLs by application code are neither
required nor possible.
Add platform ego and add macro control for the return value checking of
`fd_determine_type_rights` in libc-wasi to resolve the issue.
In the esp-idf platform, Xtensa GCC 8.4.0 reported incompatible pointer warnings when
building with the lwip component.
Berkeley (POSIX) sockets uses composition in combination with type punning to handle
many protocol families, including IPv4 & IPv6. The type punning just has to be made
explicit with pointer casts from `sockaddr_in` for IPv4 to the generic `sockaddr`.
The current implementation throws a segmentation fault when padding
files using a large range, because the writing operation overflows the
source buffer, which was a single char.
IPFS previously assumed that the offset for the seek operation was related
to the start of the file (SEEK_SET). It now correctly checks the parameter
'whence' and computes the offset for SEEK_CUR (middle of the file) and
SEEK_END (end of the file).
Add thread_wait_list_end node for thread data and cond for Windows platform
to speedup the thread join and cond wait operations: no need to traverse the
wait list to get the end node to append the wait node.
