Update generated neovim config

This reverts commit a07101f8d3.

.gitignore

@@ -1,8 +1,10 @@
 .owncloudsync.log
+.nextcloudsync.log
 .sync_*
-result
+.directory
 .direnv
 .idea
-/.directory
-.nextcloudsync.log
 .docs
+result
+
+config/neovim/store

README.md

@@ -1,44 +1,42 @@
 # NixOS Configuration
 
-This is my modular NixOS configuration, using Hyprland for a lightweight desktop.
+Modular NixOS configuration, using Hyprland for a lightweight desktop.
 
 ![](Foggy-Lake.png)
 
-To install, run ``nixos-rebuild`` with the ``--flake`` parameter from the ``NixFlake`` directory: ``nixos-rebuild switch --flake .#nixinator``.
+![](NixVim.png)
+
+To install, run `nixos-rebuild` with the `--flake` parameter from the `NixFlake` directory: `nixos-rebuild switch --flake .#nixinator`.
 
 ## NixFlake/system
 
-This folder contains all the system configurations.
+Contains all the system configurations.
 
-- There is a common configuration used for all systems: ``NixFlake/system/default.nix``
+- There is a common configuration used for all systems: `NixFlake/system/default.nix`
-- Every system has its own special configuration: ``NixFlake/system/<hostname>/default.nix``
+- Every system has its own special configuration: `NixFlake/system/<hostname>/default.nix`
-- System modules are located in ``NixFlake/system/modules``
+- System modules are located in `NixFlake/system/modules`
 
-When creating a NixOS configuration inside the ``NixFlake/flake.nix`` the common configuration is imported.
+When creating a NixOS configuration inside the `NixFlake/flake.nix` the common configuration is imported.
 Because the hostname is propagated to the common configuration, it can import the host-specific config by itself.
 
 ## NixFlake/home
 
-This folder contains all the home-manager configurations.
+Contains all the home-manager configurations.
 
-- There is a common configuration for each user: ``NixFlake/home/<username>/default.nix``
+- There is a common configuration for each user: `NixFlake/home/<username>/default.nix`
-- There is a configuration for a single system of this user: ``NixFlake/home/<username>/<hostname>/default.nix``
+- There is a configuration for a single system of this user: `NixFlake/home/<username>/<hostname>/default.nix`
-- Home-Manager modules are located in ``NixFlake/home/modules``
+- Home-Manager modules are located in `NixFlake/home/modules`
 
-When creating a NixOS configuration inside the ``NixFlake/flake.nix`` the common configuration is imported.
+When creating a NixOS configuration inside the `NixFlake/flake.nix` the common configuration is imported.
 Because the hostname is propagated to the common configuration, it can import the host-specific config by itself.
 
 ## NixFlake/derivations
 
-This folder contains all the stuff I packaged.
+Contains all the stuff I packaged.
-Each derivation is loaded into ``NixFlake/derivations/default.nix``.
+Each derivation is loaded into `NixFlake/derivations/default.nix`.
 
 ## NixFlake/overlays
 
-This folder contains (not at the moment) all overlays.
+Contains (not at the moment) all overlays.
-The ``NixFlake/overlays/default.nix`` imports all of the overlays and all of the derivations.
+The `NixFlake/overlays/default.nix` imports all of the overlays and all of the derivations.
-It is then imported by the toplevel ``NixFlake/flake.nix``, to make everything available to the system/home configurations.
+It is then imported by the toplevel `NixFlake/flake.nix`, to make everything available to the system/home configurations.
-
-## NixFlake/docs
-
-This folder contains automatically generated static documentation sites for my Home-Manager modules.

config/hyprland/hyprland.conf

@@ -77,7 +77,7 @@ dwindle {
 }
 
 master {
-    new_is_master = true
+    new_status = master
 }
 
 gestures {
@@ -130,16 +130,16 @@ bind = $mainMod SHIFT, 9, movetoworkspace, 9
 bind = $mainMod SHIFT, 0, movetoworkspace, 10
 
 # Reset the workspace positions after disabling and reenabling a monitor
-bind = CTRL ALT, R, moveworkspacetomonitor, 1 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 1 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 2 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 2 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 3 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 3 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 4 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 4 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 5 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 5 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 6 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 6 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 7 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 7 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 8 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 8 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 9 DP-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 9 HDMI-A-1
-bind = CTRL ALT, R, moveworkspacetomonitor, 10 HDMI-A-1
+bind = CTRL ALT, R, moveworkspacetomonitor, 10 DP-1
 
 # Move/resize windows with mainMod + LMB/RMB and dragging
 bindm = $mainMod, mouse:272, movewindow

config/neovim/bootstrap.lua

@@ -0,0 +1,16 @@
+-- Bootstrap lazy.nvim
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not (vim.uv or vim.loop).fs_stat(lazypath) then
+	vim.fn.system({
+		"git",
+		"clone",
+		"--filter=blob:none",
+		"https://github.com/folke/lazy.nvim.git",
+		"--branch=stable", -- latest stable release
+		lazypath,
+	})
+end
+vim.opt.rtp:prepend(lazypath)
+
+-- Setup lazy.nvim
+-- require("lazy").setup(plugins, opts) -- Do in config.lua

config/neovim/init.lua

@@ -0,0 +1,11 @@
+local addRelPath = function(dir)
+	local spath = debug.getinfo(1, "S").source:sub(2):gsub("^([^/])", "./%1"):gsub("[^/]*$", "")
+	dir = dir and (dir .. "/") or ""
+	spath = spath .. dir
+	package.path = spath .. "?.lua;" .. spath .. "?/init.lua" .. package.path
+end
+
+addRelPath()
+
+require("bootstrap")
+require("config")

config/neovim/refresh_config.sh

@@ -0,0 +1,60 @@
+#!/usr/bin/env bash
+
+# Copy init.lua
+INIT_PATH="$(readlink -f ~/.config/nvim/init.lua)"
+cp -f "$INIT_PATH" ./config.lua
+cp -f "$INIT_PATH" ./config_nix.lua
+echo "Copied $INIT_PATH to ./config.lua and ./config_nix.lua"
+
+chmod +w ./config.lua
+chmod +w ./config_nix.lua
+echo "Fixed permission for ./config.lua and ./config_nix.lua"
+echo ""
+
+# Copy all plugins
+rm -rf ./store/* # TODO: Check if ./store even exists
+echo "Cleared ./store/"
+
+STORE_PATHS=$(rg -oN "\"/nix/store/.*?(lazy-plugins|vimplugin-nvim-treesitter-.*?|treesitter-parsers)\"" config.lua | uniq | sd "\"" "")
+for STORE_PATH in $STORE_PATHS
+do
+    cp -Lr "$STORE_PATH" ./store/
+    echo "Copied $STORE_PATH to ./store/"
+done
+
+chmod -R +w ./store/*
+echo "Fixed permissions for ./store"
+echo ""
+
+# Fix plugin paths
+for IDENTIFIER in "treesitter-parsers" "lazy-plugins" "nvim-treesitter"
+do
+    CURRENT_PATH=$(eza -1 ./store | grep $IDENTIFIER)
+    mv "./store/$CURRENT_PATH" "./store/$IDENTIFIER"
+    echo "Moved ./store/$CURRENT_PATH to ./store/$IDENTIFIER"
+done
+echo ""
+
+BASE_PATH="/home/lab/smchurla/Downloads/flake-nixinator/config/neovim/store"
+for IDENTIFIER in "treesitter-parsers" "lazy-plugins" "nvim-treesitter"
+do
+    REPLACE_STRINGS=$(rg -oN "\"/nix/store/.*?$IDENTIFIER.*?\"" ./config.lua | uniq | sd "\"" "")
+    for REPLACE_STRING in $REPLACE_STRINGS
+    do
+        if [[ $REPLACE_STRING =~ .*$IDENTIFIER/.* ]];
+        then
+            # Trailing / means not the entire string can be replaced
+            REPLACE_STRING=$(dirname "$REPLACE_STRING")
+            sd "$REPLACE_STRING" "$BASE_PATH/$IDENTIFIER" ./config.lua
+            echo "Substituted $REPLACE_STRING with $BASE_PATH/$IDENTIFIER"
+        else
+            # No trailing / means the entire string can be replaced
+            sd "$REPLACE_STRING" "$BASE_PATH/$IDENTIFIER" ./config.lua
+            echo "Substituted $REPLACE_STRING with $BASE_PATH/$IDENTIFIER"
+        fi
+    done
+done
+echo ""
+
+sd "/home/christoph" "/home/lab/smchurla" ./config.lua
+echo "Substituted /home/christoph with /home/lab/smchurla"

config/neovim/store/lazy-plugins/NrrwRgn/.gitignore

@@ -0,0 +1,12 @@
+post.pl
+vim_passfile
+.*.un~
+.*.sw*
+# ignore vimballs
+*.vba
+*.vmb
+# ignore *.orig files
+*.orig
+doc/tags
+# ignore test files
+*.mod

config/neovim/store/lazy-plugins/NrrwRgn/Makefile

@@ -0,0 +1,48 @@
+SCRIPT=$(wildcard plugin/*.vim)
+AUTOL =$(wildcard autoload/*.vim)
+DOC=$(wildcard doc/*.txt)
+PLUGIN=$(shell basename "$$PWD")
+VERSION=$(shell sed -n '/Version:/{s/^.*\(\S\.\S\+\)$$/\1/;p}' $(SCRIPT))
+
+.PHONY: $(PLUGIN).vmb README test
+
+all: uninstall vimball install
+
+vimball: $(PLUGIN).vmb
+
+clean:
+	find . -type f \( -name "*.vba" -o -name "*.orig" -o -name "*.~*" \
+	-o -name ".VimballRecord" -o -name ".*.un~" -o -name "*.sw*" -o \
+	-name tags -o -name "*.vmb" \) -delete
+
+dist-clean: clean
+
+install:
+	vim -N -i NONE -u NONE -c 'ru! plugin/vimballPlugin.vim' -c':so %' -c':q!' $(PLUGIN)-$(VERSION).vmb
+
+uninstall:
+	vim -N -i NONE -u NONE -c 'ru! plugin/vimballPlugin.vim' -c':RmVimball' -c':q!' $(PLUGIN)-$(VERSION).vmb
+
+undo:
+	for i in */*.orig; do mv -f "$$i" "$${i%.*}"; done
+
+README:
+	cp -f $(DOC) README
+
+$(PLUGIN).vmb:
+	rm -f $(PLUGIN)-$(VERSION).vmb
+	vim -N -i NONE -u NONE -c 'ru! plugin/vimballPlugin.vim' -c ':call append("0", [ "$(SCRIPT)", "$(AUTOL)", "$(DOC)"])' -c '$$d' -c ":%MkVimball $(PLUGIN)-$(VERSION)  ." -c':q!'
+	ln -f $(PLUGIN)-$(VERSION).vmb $(PLUGIN).vmb
+     
+release: version all README
+
+test:
+	cd test && ./runtest.sh
+
+version:
+	perl -i.orig -pne 'if (/Version:/) {s/\.(\d*)/sprintf(".%d", 1+$$1)/e}' ${SCRIPT} ${AUTOL}
+	perl -i -pne 'if (/GetLatestVimScripts:/) {s/(\d+)\s+:AutoInstall:/sprintf("%d :AutoInstall:", 1+$$1)/e}' ${SCRIPT}  ${AUTOL}
+	#perl -i -pne 'if (/Last Change:/) {s/\d+\.\d+\.\d\+$$/sprintf("%s", `date -R`)/e}' ${SCRIPT}
+	perl -i -pne 'if (/Last Change:/) {s/(:\s+).*\n/sprintf(": %s", `date -R`)/e}' ${SCRIPT} ${AUTOL}
+	perl -i.orig -pne 'if (/Version:/) {s/\.(\d+).*\n/sprintf(".%d %s", 1+$$1, `date -R`)/e}' ${DOC}
+	VERSION=$(shell sed -n '/Version:/{s/^.*\(\S\.\S\+\)$$/\1/;p}' $(SCRIPT))

config/neovim/store/lazy-plugins/NrrwRgn/README.md

@@ -0,0 +1,60 @@
+# NrrwRgn plugin [![Say Thanks!](https://img.shields.io/badge/Say%20Thanks-!-1EAEDB.svg)](https://saythanks.io/to/cb%40256bit.org)
+
+> A Vim plugin for focussing on a selected region
+
+This plugin is inspired by the [Narrowing feature of Emacs](http://www.emacswiki.org/emacs/Narrowing) and means to focus on a selected region while making the rest inaccessible. You simply select the region, call `:NR` and the selected part will open in a new split window while the rest of the buffer will be protected. Once you are finished, simply write the narrowed window (`:w`) and all the changes will be moved back to the original buffer.
+
+See also the following screencast, that shows several features available:
+![screencast of the plugin](screencast.gif "Screencast")
+
+## Installation
+
+Use the plugin manager of your choice. Or download the [stable][] version of the plugin, edit it with Vim (`vim NrrwRgn-XXX.vmb`) and simply source it (`:so %`). Restart and take a look at the help (`:h NrrwRgn.txt`)
+
+[stable]: http://www.vim.org/scripts/script.php?script_id=3075
+
+## Usage
+
+Once installed, take a look at the help at `:h NarrowRegion`.
+
+Here is a short overview of the functionality provided by the plugin:
+
+### Ex commands:
+
+    :NR  - Open the selected region in a new narrowed window
+    :NW  - Open the current visual window in a new narrowed window
+    :WR  - (In the narrowed window) write the changes back to the original buffer.
+    :NRV - Open the narrowed window for the region that was last visually selected.
+    :NUD - (In a unified diff) open the selected diff in 2 Narrowed windows
+    :NRP - Mark a region for a Multi narrowed window
+    :NRM - Create a new Multi narrowed window (after :NRP) - experimental!
+    :NRS - Enable Syncing the buffer content back (default on)
+    :NRN - Disable Syncing the buffer content back
+    :NRL - Reselect the last selected region and open it again in a narrowed window
+
+You can append `!` to most commands to open the narrowed part in the current window instead of a new window. In the case of `:WR`, appending `!` closes the narrowed window in addition to writing to the original buffer.
+
+### Visual mode commands:
+
+    <Leader>nr		 - Open the current visual selection in a new narrowed window
+
+### Scripting Functions:
+
+    nrrwrgn#NrrwRgnStatus()   - Return a dict with all the status information for the current window
+
+### Attention
+
+   :NRM is currently experimental
+
+## Similar Work
+
+Andreas Politz' [narrow_region](http://www.vim.org/scripts/script.php?script_id=2038)<br/>
+Kana Natsunos [narrow](http://www.vim.org/scripts/script.php?script_id=2097)<br/>
+Jonas Kramers [narrow](http://www.vim.org/scripts/script.php?script_id=2446)<br/>
+Marcin Szamotulskis [ViewPort](http://www.vim.org/scripts/script.php?script_id=4296)<br/>
+
+## License & Copyright
+
+© 2009-2014 by Christian Brabandt. The Vim License applies. See `:h license`
+
+__NO WARRANTY, EXPRESS OR IMPLIED.  USE AT-YOUR-OWN-RISK__

config/neovim/store/lazy-plugins/NrrwRgn/doc/NarrowRegion.txt

@@ -0,0 +1,818 @@
+*NrrwRgn.txt*   A Narrow Region Plugin (similar to Emacs)
+
+Author:  Christian Brabandt <cb@256bit.org>
+Version: 0.33 Thu, 15 Jan 2015 20:52:29 +0100
+Copyright: (c) 2009-2015 by Christian Brabandt
+           The VIM LICENSE applies to NrrwRgnPlugin.vim and NrrwRgnPlugin.txt
+           (see |copyright|) except use NrrwRgnPlugin instead of "Vim".
+           NO WARRANTY, EXPRESS OR IMPLIED.  USE AT-YOUR-OWN-RISK.
+
+==============================================================================
+1. Contents                                    *NarrowRegion*  *NrrwRgnPlugin*
+
+        1.  Contents.....................................: |NrrwRgnPlugin|
+        2.  NrrwRgn Manual...............................: |NrrwRgn-manual|
+        2.1   NrrwRgn Howto..............................: |NR-HowTo|
+        2.2   NrrwRgn Multi..............................: |NR-multi-example|
+        2.3   NrrwRgn Configuration......................: |NrrwRgn-config|
+        2.4   NrrwRgn public functions...................: |NrrwRgn-func|
+        3.  NrrwRgn Tips.................................: |NrrwRgn-tips|
+        4.  NrrwRgn Feedback.............................: |NrrwRgn-feedback|
+        5.  NrrwRgn History..............................: |NrrwRgn-history|
+
+==============================================================================
+2. NrrwRgn Manual                                       *NrrwRgn-manual*
+
+Functionality
+
+This plugin is based on a discussion in comp.editors (see the thread at
+http://groups.google.com/group/comp.editors/browse_frm/thread/0f562d97f80dde13)
+
+Narrowing means focussing on a region and making the rest inaccessible. You
+simply select the region, call |:NarrowRegion| and the selected part will open
+in a new scratch buffer. The rest of the file will be protected, so you won't
+accidentally modify that buffer. In the new buffer, you can do a global
+replace, search or anything else to modify that part. When you are finished,
+simply write that buffer (e.g. by |:w|) and your modifications will be put in
+the original buffer making it accessible again. Use |:q!| or |:bw!| to abort
+your changes and return back to the original window.
+
+NrrwRgn allows you to either select a line based selection using an Ex-command
+or you can simply use any visual selected region and press your preferred key
+combination to open that selection in a new buffer.
+
+This plugin defines the following commands:
+
+                                                        *:NarrowRegion* *:NR*
+:[range]NR[!]
+:[range]NarrowRegion[!]     When [range] is omitted, select only the current
+                            line, else use the lines in the range given and
+                            open it in a new Scratch Window.
+                            If the current line is selected and is on a folded
+                            region, select the whole folded text.
+                            Whenever you are finished modifying that region
+                            simply write the buffer.
+                            If ! is given, open the narrowed buffer not in a
+                            split buffer but in the current window. However
+                            when 'hidden' is not set, will open a new split
+                            window. 
+
+                                                        *:NarrowWindow* *:NW*
+:NW[!]
+:NarrowWindow[!]            Select only the range that is visible the current
+                            window and open it in a new Scratch Window.
+                            Whenever you are finished modifying that region
+                            simply write the buffer.
+                            If ! is given, open the narrowed buffer not in a
+                            split buffer but in the current window (works best
+                            with 'hidden' set).
+
+                                                         *:WidenRegion* *:WR*
+:WR[!]
+:WidenRegion[!]             This command is only available in the narrowed
+                            scratch window. If the buffer has been modified,
+                            the contents will be put back on the original
+                            buffer. If ! is specified, the window will be
+                            closed, otherwise it will remain open.
+
+                                                                        *:NRV*
+:NRV[!]                     Opened the narrowed window for the region that was
+                            last selected in visual mode
+                            If ! is given, open the narrowed buffer not in a
+                            split buffer but in the current window (works best
+                            with 'hidden' set).
+
+                                                                        *:NUD*
+
+:NUD                        When viewing unified diffs, this command opens
+                            the current chunk in 2 Narrowed Windows in
+                            |diff-mode| The current chunk is determined as the
+                            one, that the cursor is at.
+                            For filetypes other than diffs, it will try to
+                            create a diff mode for a merge conflict.
+
+                                                                  *:NRPrepare*
+:[range]NRPrepare[!]
+:[range]NRP[!]              You can use this command, to mark several lines
+                            that will later be put into a Narrowed Window
+                            using |:NRM|.
+                            Using '!' clears the selection and does not add
+                            any lines.
+                            Use |:NRUnprepare| to remove a line again.
+
+                                                                  *:NRUnprepare*
+:[range]NRUnprepare[!]
+                            This command will remove the current line and
+                            remove it from the lines marked for use with |:NRM|.
+                            If the current line was not previously selected
+                            for a multi narrowed window, it is ignored.
+
+                                                                  *:NRMulti*
+:NRMulti
+:NRM[!]                     This command takes all lines, that have been
+                            marked by |:NRP| and puts them together in a new
+                            narrowed buffer.
+                            When you write your changes back, all separate
+                            lines will be put back at their origin.
+                            This command also clears the list of marked lines,
+                            that was created with |NRP|.
+                            See also |NR-multi-example|.
+                            If ! is given, open the narrowed buffer not in a
+                            split buffer but in the current window (works best
+                            with 'hidden' set).
+
+                                                    *:NRSyncOnWrite* *:NRS*
+:NRSyncOnWrite
+:NRS                        Enable synching the buffer content back to the
+                            original buffer when writing.
+                            (this is the default).
+
+                                                    *:NRNoSyncOnWrite* *:NRN*
+:NRNoSyncOnWrite
+:NRN                        Disable synching the buffer content back to the
+                            original buffer when writing. When set, the
+                            narrowed buffer behaves like an ordinary buffer
+                            that you can write in the filesystem.               
+                            Note: You can still use |:WidenRegion| to write
+                            the changes back to the original buffer.
+
+                                                                    *:NRL*
+
+:NRL[!]                     Reselect the last selected region again and open
+                            in a narrowed window.
+                            If ! is given, open the narrowed buffer not in a
+                            split buffer but in the current window (works best
+                            with 'hidden' set).
+
+
+2.1 NrrwRgn HowTo                                                *NR-HowTo*
+-----------------
+
+Use the commands provided above to select a certain region to narrow. You can
+also start visual mode and have the selected region being narrowed. In this
+mode, NarrowRegion allows you to block select |CTRL-V| , character select |v|
+or linewise select |V| a region. Then press <Leader>nr where <Leader> by
+default is set to '\', unless you have set it to something different (see
+|<Leader>| for information how to change this) and the selected range will
+open in a new scratch buffer. This key combination only works in |Visual-mode|
+If instead of <Leader>nr you use <Leader>Nr in visual mode, the selection will
+be opened in the current window, replacing the original buffer.
+
+(Alternatively, you can use the normal mode mapping <Leader>nr and the region
+over which you move will be opened in a new Narrowed window).
+
+When finished, simply write that Narrowed Region window, from which you want
+to take the modifications in your original file.
+
+It is possible, to recursively open a Narrowed Window on top of an already
+narrowed window. This sounds a little bit silly, but this makes it possible,
+to have several narrowed windows, which you can use for several different
+things, e.g. If you have 2 different buffers opened and you want to diff a
+certain region of each of those 2 buffers, simply open a Narrowed Window for
+each buffer, and execute |:diffthis| in each narrowed window.
+
+You can then interactively merge those 2 windows. And when you are finished,
+simply write the narrowed window and the changes will be taken back into the
+original buffer.
+
+When viewing unified diffs, you can use the provided |:NUD| command to open 2
+Narrowed Windows side by side viewing the current chunk in |diff-mode|. Those
+2 Narrowed windows will be marked 'modified', since there was some post
+processing involved when opening the narrowed windows. Be careful, when
+quitting the windows, not to write unwanted changes into your patch file! In
+the window that contains the unified buffer, you can move to a different
+chunk, run |:NUD| and the 2 Narrowed Windows in diff mode will update.
+
+2.2 NrrwRgn Multi                                    *NR-multi-example*
+-----------------
+
+Using the commands |:NRP| and |:NRM| allows to select a range of lines, that
+will be put into a narrowed buffer together. This might sound confusing, but
+this allows to apply a filter before making changes. For example before
+editing your config file, you decide to strip all comments for making big
+changes but when you write your changes back, these comments will stay in your
+file. You would do it like this: >
+    :v/^#/NRP
+    :NRMulti
+<
+Now a Narrowed Window will open, that contains only the configuration lines.
+Each block of independent region will be separated by a string like
+
+# Start NarrowRegion1
+.....
+# End NarrowRegion1
+
+This is needed, so the plugin later knows, which region belongs where in the
+original place. Blocks you don't want to change, you can safely delete, they
+won't be written back into your original file. But other than that, you
+shouldn't change those separating lines.
+
+When you are finished, simply write your changes back.
+
+==============================================================================
+
+2.3 NrrwRgn Configuration                                    *NrrwRgn-config*
+-------------------------
+
+NarrowRegion can be customized by setting some global variables. If you'd
+like to open the narrowed window as a vertical split buffer, simply set the
+variable *g:nrrw_rgn_vert* to 1 in your |.vimrc| >
+
+    let g:nrrw_rgn_vert = 1
+<
+(default: 0)
+------------------------------------------------------------------------------
+
+If you'd like to specify a certain width/height for you scratch buffer, then
+set the variable *g:nrrw_rgn_wdth* in your |.vimrc| . This variable defines the
+height or the nr of columns, if you have also set g:nrrw_rgn_vert. >
+
+    let g:nrrw_rgn_wdth = 30
+<
+(default: 20)
+
+Note: if the newly created narrowed window is smaller than this, it will be
+resized to fit (plus an additional padding that can be specified using the
+g:nrrw_rgn_pad variable (default: 0), to not leave unwanted space around (not
+for single narrowed windows, e.g. when the '!' attribute was used).
+
+------------------------------------------------------------------------------
+
+Resizing the narrowed window can happen either by some absolute values or by a
+relative percentage. The variable *g:nrrw_rgn_resize_window* determines what
+kind of resize will occur. If it is set to "absolute", the resizing will be
+done by absolute lines or columns (depending on whether a horizontal or
+vertical split has been done). If it is set to "relative" the window will be
+resized by a percentage.  Set it like this in your |.vimrc| >
+
+    let g:nrrw_rgn_resize_window = 'absolute'
+<
+(default: absolute)
+
+The percentages for increasing the window size can further be specified by
+seting the following variables:
+
+default:
+g:nrrw_rgn_rel_min: 10 (50 for vertical splits)
+g:nrrw_rgn_rel_max: 80
+
+------------------------------------------------------------------------------
+
+It is possible to specify an increment value, by which the narrowed window can
+be increased. This is allows to easily toggle between the normal narrowed
+window size and an even increased size (think of zooming). 
+
+You can either specify a relative or absolute zooming value. An absolute
+resize will happen, if the variable |g:nrrw_rgn_resize_window| is set to
+"absolute" or it is unset (see above).
+
+If absolute resizing should happen you have to either specify columns, if the
+Narrowed window is a vertical split window or lines, if a horizontal split has
+been done.
+
+Example, to increase the narrowed window by 30 lines or columns if
+(g:nrrw_rgn_vert is also set [see above]), set in your |.vimrc| >
+
+    let g:nrrw_rgn_incr = 30
+<
+(default: 10, if |g:nrrw_rgn_resize_window| is "absolute")
+
+Note: When using the '!' attribute for narrowing (e.g. the selection will be
+opened in a new window that takes the complete screen size), no resizeing will
+happen
+------------------------------------------------------------------------------
+
+If you'd like to change the key combination that toggles incrementing the
+Narrowed Window size, map *<Plug>NrrwrgnWinIncr* by putting this in your |.vimrc| >
+
+   nmap <F3> <Plug>NrrwrgnWinIncr
+<
+(default: <Leader><Space>)
+
+This will let you use the <F3> key to toggle the window size of the Narrowed
+Window. Note: This mapping is only in the narrowed window active.
+
+The amount of how much to increase can be further refined by setting the
+*g:nrrw_rgn_incr* for an absolute increase of by setting the variables
+*g:nrrw_rgn_rel_min* and *g:nrrw_rgn_rel_max*
+
+Whether an absolute or relative increase will be performed, is determined by
+the |g:nrrw_rgn_resize_window| variable (see above).
+------------------------------------------------------------------------------
+
+By default, NarrowRegion highlights the region that has been selected
+using the WildMenu highlighting (see |hl-WildMenu|). If you'd like to use a
+different highlighting, set the variable g:nrrw_rgn_hl to your preferred
+highlighting Group. For example to have the region highlighted like a search
+result, you could set *g:nrrw_rgn_hl* in your |.vimrc| >
+
+    let g:nrrw_rgn_hl = 'Search'
+<
+(default: WildMenu)
+
+If you want to turn off the highlighting (because this can be distracting), you
+can set the global variable *g:nrrw_rgn_nohl* to 1 in your |.vimrc| >
+
+    let g:nrrw_rgn_nohl = 1
+<
+(default: 0)
+------------------------------------------------------------------------------
+
+If you'd like to change the key combination that starts the Narrowed Window
+for your selected range, you could map *<Plug>NrrwrgnDo* in your |.vimrc| >
+
+   xmap <F3> <Plug>NrrwrgnDo
+<
+This will let <F3> open the Narrow-Window, but only if you have pressed it in
+Visual Mode. It doesn't really make sense to map this combination to any other
+mode, unless you want it to Narrow your last visually selected range.
+
+(default: <Leader>nr)
+------------------------------------------------------------------------------
+
+If you'd like to specify the options that you want to have set for the
+narrowed window, you can set the *g:nrrw_custom_options* setting, in your
+|.vimrc| e.g. >
+
+   let g:nrrw_custom_options={}
+   let g:nrrw_custom_options['filetype'] = 'python'
+>
+This will only apply those options to the narrowed buffer. You need to take
+care that all options you need will apply.
+
+------------------------------------------------------------------------------
+
+If you don't like that your narrowed window opens above the current window,
+define the *g:nrrw_topbot_leftright* variable to your taste, e.g. >
+
+  let g:nrrw_topbot_leftright = 'botright'
+<
+Now, all narrowed windows will appear below the original window. If not
+specified, the narrowed window will appear above/left of the original window.
+
+(default: topleft)
+------------------------------------------------------------------------------
+
+If you want to use several independent narrowed regions of the same buffer
+that you want to write at the same time, protecting the original buffer is not
+really useful. Therefore, set the *g:nrrw_rgn_protect* variable, e.g. in your
+|.vimrc| >
+
+   let g:nrrw_rgn_protect = 'n'
+<
+This can be useful if you diff different regions of the same file, and want
+to be able to put back the changes at different positions. Please note that
+you should take care not to change any part that will later be influenced
+when writing the narrowed region back.
+
+Note: Don't use overlapping regions! Your changes will probably not be put
+back correctly and there is no guard against losing data accidentally. NrrwRgn
+tries hard to adjust the highlighting and regions as you write your changes
+back into the original buffer, but it can't guarantee that this will work and
+might fail silently. Therefore, this feature is experimental!
+
+(default: y)
+------------------------------------------------------------------------------
+
+If you are using the |:NRMulti| command and want to have the original window
+update to the position of where the cursor is in the narrowed window, you can
+set the variable *g:nrrw_rgn_update_orig_win,* e.g. in your |.vimrc| >
+
+   let g:nrrw_rgn_update_orig_win = 1
+<
+Now the cursor in the original window will always update when the position
+changes in the narrowed window (using a |CursorMoved| autocommand).
+Note: that this might slow down scrolling and cursor movement a bit.
+
+(default: 0)
+------------------------------------------------------------------------------
+
+By default, NarrowRegion plugin defines the two mappings <Leader>nr in visual
+mode and normal mode and <Leader>Nr only in visual mode. If you have your own
+mappings defined, than NarrowRegion will complain about the key already being
+defined. Chances are, this will be quite annoying to you, so you can disable
+mappings those keys by defining the variables *g:nrrw_rgn_nomap_nr* and
+*g:nrrw_rgn_nomap_Nr* in your |.vimr| >
+
+  :let g:nrrw_rgn_nomap_nr = 1
+  :let g:nrrw_rgn_nomap_Nr = 1
+
+(default: 0)
+----------------------------------------------------------------------------
+                                                 *NrrwRgn-hook*  *NR-hooks*
+
+NarrowRegion can execute certain commands, when creating the narrowed window
+and when closing the narrowed window. For this, you can set 2 buffer-local
+variables that specify what commands to execute, which will hook into the
+execution of the Narrow Region plugin.
+
+For example, suppose you have a file, containing columns separated data (CSV
+format) which you want to modify and you also have the CSV filetype plugin
+(http://www.vim.org/scripts/script.php?script_id=2830) installed and you want
+to modify the CSV data which should be visually arranged like a table in the
+narrowed window.
+
+Therefore you want the command |:ArrangeColumn| to be executed in the new
+narrowed window upon entering it, and when writing the changes back, you want
+the command |:UnArrangeColumn| to be executed just before putting the
+changes back. So you set the two variables *b:nrrw_aucmd_create* and
+*b:nrrw_aucmd_close* in your original buffer: >
+
+    let b:nrrw_aucmd_create = "set ft=csv|%ArrangeCol"
+    let b:nrrw_aucmd_close  = "%UnArrangeColumn"
+<
+This will execute the commands in the narrowed window: >
+
+    :set ft=csv
+    :%ArrangeCol
+
+and before writing the changes back, it'll execute: >
+
+    :%UnArrangeCol
+
+Note: These hooks are executed in the narrowed window (i.e. after creating the
+narrowed window and its content and before writing the changes back to the
+original buffer).
+
+Additional hooks *b:nrrw_aucmd_writepost* and *b:nrrw_aucmd_written* are
+provided, when the data is written back in the original window: the first one
+is executed in the narrowed window, while the second one in the original one
+(the one where the narrowed region was created from).  For example, consider
+you want the execute the command |:make| in the narrowed window, and also write
+the original buffer, whenever the narrowed window is written back to the
+original window. You therefore set: >
+    
+    :let b:nrrw_aucmd_writepost = ':make'
+    :let b:nrrw_aucmd_written = ':update'
+<
+This will run |:make| in the narrowed window and also |:update| the original
+buffer, whenever it was modified after writing the changes from the narrowed
+window back.
+
+2.4 NrrwRgn functions                                    *NrrwRgn-func*
+---------------------
+The NrrwRgn plugin defines a public function in its namespace that can be used
+to query its status.
+                                                        *nrrwrgn#NrrwRgnStatus()*
+nrrwrgn#NrrwRgnStatus()
+    Returns a dict with the following keys:
+        'shortname':    The displayed buffer name
+        'fullname':     The complete buffer name of the original buffer
+        'multi':        1 if it is a multi narrowed window (|:NRMulti|),
+                        0 otherwise.
+        'startl':       List of start lines for a multi narrowed window
+                        (only present, if 'multi' is 1)
+        'endl':         List of end lines for a multi narrowed window
+                        (only present, if 'multi' is 1)
+        'start':        Start position (only present if 'multi' is 0)
+        'end':          End position (only present if 'multi' is 0)
+        'visual':       Visual Mode, if it the narrowed window was started
+                        from a visual selected region (empty otherwise).
+        'enabled':      Whether syncing the buffer is enabled (|:NRS|)
+                            
+    If not executed in a narrowed window, returns an empty dict.
+=============================================================================
+3. NrrwRgn Tips                                           *NrrwRgn-tips*
+
+To have the filetype in the narrowed window set, you can use this function: >
+
+  command! -nargs=* -bang -range -complete=filetype NN
+              \ :<line1>,<line2> call nrrwrgn#NrrwRgn('',<q-bang>)
+              \ | set filetype=<args>
+<
+This lets you select a region, call :NN sql and the selected region will get
+the sql filetype set.
+
+(Contributed by @fourjay, thanks!)
+
+=============================================================================
+4. NrrwRgn Feedback                                        *NrrwRgn-feedback*
+
+Feedback is always welcome. If you like the plugin, please rate it at the
+vim-page:
+http://www.vim.org/scripts/script.php?script_id=3075
+
+You can also follow the development of the plugin at github:
+http://github.com/chrisbra/NrrwRgn
+
+Please don't hesitate to report any bugs to the maintainer, mentioned in the
+third line of this document.
+
+If you like the plugin, write me an email (look in the third line for my mail
+address). And if you are really happy, vote for the plugin and consider
+looking at my Amazon whishlist: http://www.amazon.de/wishlist/2BKAHE8J7Z6UW
+
+=============================================================================
+5. NrrwRgn History                                          *NrrwRgn-history*
+
+0.34: (unreleased) {{{1
+- merge Github Pull #34 (https://github.com/chrisbra/NrrwRgn/pull/34, by
+  Pyrohh, thanks!)
+- resize narrowed window to actual size, this won't leave the a lot of 
+  empty lines in the narrowed window.
+- don't switch erroneously to the narrowed window on writing
+  (https://github.com/chrisbra/NrrwRgn/issues/35, reported by Yclept Nemo
+  thanks!)
+- Always write the narrowed scratch window back on |:w| instead of only when
+  it was modified (https://github.com/chrisbra/NrrwRgn/issues/37, reported by
+  Konfekt, thanks!)
+- Do not resize window, if :NR! was used (patch by leonidborisenko from
+  https://github.com/chrisbra/NrrwRgn/pull/38 thanks!)
+- Various improvements for Window resizing, partly by Yclept Nemo, thanks!
+- Fixed error for undefined function and cursor movement in wrong window
+  (issue https://github.com/chrisbra/NrrwRgn/issues/42 reported by adelarsq,
+  thanks!)
+- Don't set the original buffer to be modified in single-window mode (issue
+  https://github.com/chrisbra/NrrwRgn/issues/43, reported by agguser, thanks!)
+- Don't clean up on BufWinLeave autocommand, so that switching buffers will
+  not destroy the BufWriteCmd (issue https://github.com/chrisbra/NrrwRgn/issues/44,
+  reported by agguser, thanks!)
+- remove highlighting after closing narrowed buffer
+  (also issue https://github.com/chrisbra/NrrwRgn/issues/45,
+  reported by Serabe, thanks!)
+- do not map <Leader>nr and <Leader>Nr if g:nrrw_rgn_nomap_<key> is set
+  (issue https://github.com/chrisbra/NrrwRgn/issues/52, reported by
+  digitalronin, thanks!)
+- correctly highlight in block-wise visual mode, if '$' has been pressed.
+- do not set bufhidden=delete for single narrowed windows
+  https://github.com/chrisbra/NrrwRgn/issues/62
+- Make :NUD able to handle git like merge conflicts
+  https://github.com/chrisbra/NrrwRgn/issues/68
+- Correctly jump to the original window when closing
+  https://github.com/chrisbra/NrrwRgn/issues/70
+- Allow to Unremove lines from |:NRP| command
+  https://github.com/chrisbra/NrrwRgn/issues/72
+- Clarify documentation about |:NRP| command
+  https://github.com/chrisbra/NrrwRgn/issues/71
+
+0.33: Jan 16, 2015 {{{1
+- set local options later, so that FileType autocommands don't trigger to
+  early
+- make sure, shortening the buffer name handles multibyte characters
+  correctly.
+- new public function |nrrwrgn#NrrwRgnStatus()|
+- <Leader>nr also mapped as operator function (so the region over which you
+  move will be opened in the narrowed window
+- highlighting wrong when char-selecting within a line
+- needs Vim 7.4
+- mention how to abort the narrowed window (suggested by David Fishburn,
+  thanks!)
+- Execute hooks after the options for the narrowed window have been set
+  (issue #29, reported by fmorales, thanks!)
+- <Leader><Space> Toggles the Narrowed Window Size (idea by David Fishburn,
+  thanks!)
+- New hook b:nrrw_aucmd_written, to be executed, whenever the narrowed info
+  has been written back into the original buffer.
+- g:nrrw_rgn_write_on_sync is being deprecated in favor of using the newly
+  "written" hook
+- error on writing back multi narrowed window (issue #30, reported by
+  aleprovencio https://github.com/chrisbra/NrrwRgn/issues/30, thanks!)
+- document autoresize function (g:nrrw_rgn_autoresize_win)
+- error when calling Incr Function, Make it override over global mapping.
+  (issue #31, reported by zc he https://github.com/chrisbra/NrrwRgn/issues/31, thanks!)
+- |:NRP| didn't work as documented (reported by David Fishburn, thanks!)
+- fix small syntax error in autoload file (issue #32, reported by itchyny
+  (https://github.com/chrisbra/NrrwRgn/issues/32, thanks!)
+- check, that dict key is available before accessing it (issue #33, reported by SirCorion
+  (https://github.com/chrisbra/NrrwRgn/issues/33, thanks!)
+
+0.32: Mar 27, 2014 {{{1
+- hooks could corrupt the narrowed buffer, if it wasn't closed (reported by
+  jszakemeister https://github.com/chrisbra/NrrwRgn/issues/19, thanks!)
+- Don't parse $VIMRUNTIME/doc/options.txt for finding out buffer-local options
+  (reported by AguirreIF https://github.com/chrisbra/NrrwRgn/issues/21,
+  thanks!), instead include a fix set of option names to set when opening the
+  narrowed buffer.
+- Switching buffers in the original narrowed buffer, may confuse NrrwRgn.
+- Code cleanup (no more separate functions for visual and normal mode)
+- fix issue 22 (characterwise narrowing was brocken in last commit, reported
+  by Matthew Boehm in https://github.com/chrisbra/NrrwRgn/issues/22, thanks!)
+- in characterwise visual selection, trailing \n is not stripped when writing
+  (reported by Matthew Boehm in https://github.com/chrisbra/NrrwRgn/23,
+  thanks!)
+- highlighting was wrong for characterwise visual selections
+- update original window for multi narrowed regions (
+  https://github.com/chrisbra/NrrwRgn/24, reported by Dane Summers, thanks!),
+  use the g:nrrw_rgn_update_orig_win variable to enable
+- error when narrowed window was moved to new tab and trying to quit
+  (https://github.com/chrisbra/NrrwRgn/2, reported by Mario Ricalde, thanks!)
+- better default names for the narrowed window
+  (https://github.com/chrisbra/Nrrwrgn/28, reported by Mario Ricalde, thanks!)
+- when setting g:nrrw_rgn_write_on_sync the original file will be saved,
+  whenever the narrowed window is written back
+  (https://github.com/chrisbra/26, reported by Mario Ricalde, thanks!)
+- Some more error handling when using |:WidenRegion|
+- Make sure highlighting is removed when using |:WidenRegion|
+
+0.31: Feb 16, 2013 {{{1
+- NRM threw some errors (reported by pydave in
+  https://github.com/chrisbra/NrrwRgn/issues/17, thanks!)
+- don't create swapfiles (reported by ping, thanks!)
+
+0.30: Jan 25, 2013 {{{1
+- |NRL| throws erros, when used without having first narrowed a region
+- |NRV!| not allowed (reported by ping, thanks!)
+- when using single window narrowing, :w would jump back to the original
+  window. Only do this, when 'hidden' is not set (reported by ping, thanks!)
+- when narrowing a region, the last visual selected region wasn't correctly
+  restored (reported by ping, thanks!)
+- some code cleanup
+- recursive narrowing was broken, fix it (reported by ping, thanks!)
+
+0.29: Aug 20, 2012 {{{1
+- Use ! to have the narrowed buffer not opened in a new window (suggested by
+  Greg Sexton thanks!, issue #8
+  https://github.com/chrisbra/NrrwRgn/issues/8)
+- Fix mappings for visual mode (https://github.com/chrisbra/NrrwRgn/issues/9,
+  reported by Sung Pae, thanks!)
+- Fix problem with setting the filetype
+  (https://github.com/chrisbra/NrrwRgn/issues/10, reported by Hong Xu,
+  thanks!)
+- Fix some minor problems, when using ! mode
+0.28: Jun 03, 2012 {{{1
+- Plugin did not store last narrowed region when narrowed window was moved to
+  another tabpage (reported by Ben Fritz, thanks!)
+
+0.27: May 17, 2012 {{{1
+- When using |:NR| on a line that is folded, include the whole folded region
+  in the Narrowed window.
+- Better filetype detection for comments
+- Error handling, when doing |:NRM| without doing |:NRP| first
+- Use |:NRP!| to clear the old selection
+- Don't load the autoload script when sourcing the plugin script
+  (reported by Sergey Khorev, thanks!)
+- Vim 7.3.449 introduced E855, prevent this error.
+- |:NRL|
+- |NRM| did not correctly parse the list of lines provided by |:NRP|
+- highlighted pattern for blockwise visual narrowed regions was wrong
+- Saving blockwise visual selected regions back, could corrupt the contents
+
+0.26: Jan 02, 2012 {{{1
+
+- Fix issue https://github.com/chrisbra/NrrwRgn/issues/7
+  (reported by Alessio B., thanks!)
+
+
+0.25: Nov 08, 2011 {{{1
+
+- updated documentation (patch by Jean, thanks!)
+- make it possible, to not sync the narrowed buffer back by disabling
+  it using |:NRSyncOnWrite| |:NRNoSyncOnWrite|
+
+0.24: Oct 24, 2011 {{{1
+
+- error on vim.org page, reuploaded version 0.22 as 0.24
+
+0.23: Oct 24, 2011 {{{1
+
+- (wrongly uploaded to vim.org)
+
+0.22: Oct 24, 2011 {{{1
+
+- Allow customization via the use of hooks (|NR-hooks|)
+
+0.21: July 26, 2011 {{{1
+
+- Fix undefined variable adjust_line_numbers
+  https://github.com/chrisbra/NrrwRgn/issues/5 (reported by jmcantrell,
+  thanks!)
+
+0.20: July 25, 2011 {{{1
+- allow customization via the g:nrrw_topbot_leftright variable (Thanks Herbert
+  Sitz!)
+- allow what options will be applied using the g:nrrw_custom_options dict
+  (suggested by Herbert Sitz. Thanks!)
+- NRV didn't hightlight the region that was selected (reported by Herbert
+  Sitz, thanks!)
+- use the g:nrrw_rgn_protect variable, to prevent that the original buffer
+  will be protected. This is useful, if you narrow several regions of the same
+  buffer and want to write those changes indepentently (reported by kolyuchiy
+  in https://github.com/chrisbra/NrrwRgn/issues/3, Thanks!)
+- fix an error with not correctly deleting the highlighted region, that was
+  discovered when reporting issue 3 (see above). (Reported by kolyuchiy,
+  thanks!)
+- Catch errors, when setting window local options. (Patch by Sung Pae,
+  Thanks!)
+
+0.19: May 22, 2011 {{{1
+- fix issue 2 from github https://github.com/chrisbra/NrrwRgn/issues/2
+  (Widening does not work, if the narrowed windows have been moved to a new
+  tabspace). Reported by vanschelven, thanks!
+
+0.18: December 10, 2010 {{{1
+- experimental feature: Allow to Narrow several different regions at once
+  using :g/pattern/NRP and afterwards calling :NRM
+  (This only works linewise. Should that be made possible for any reagion?)
+- disable folds, before writing changes back, otherwise chances are, you'll
+  lose more data then wanted
+- code cleanup
+
+0.17: November 23, 2010 {{{1
+- cache the options, that will be set (instead of parsing
+  $VIMRUNTIME/doc/options.txt every time) in the Narrowed Window
+- getting the options didn't work, when using an autocommand like this:
+  autocmd BufEnter * cd %:p:h
+  (reported by Xu Hong, Thanks!)
+- :q didn't clean up the Narrowed Buffer correctly. Fix this
+- some code cleanup
+
+0.16: November 16, 2010 {{{1
+- Bugfix: copy all local options to the narrowed window (reported by Xu Hong,
+  Thanks!)
+
+0.15: August 26, 2010 {{{1
+- Bugfix: minor documentation update (reported by Hong Xu, Thanks!)
+
+0.14: August 26, 2010 {{{1
+- Bugfix: :only in the original buffer resulted in errors (reported by Adam
+  Monsen, Thanks!)
+
+0.13: August 22, 2010 {{{1
+- Unified Diff Handling (experimental feature)
+
+0.12: July 29, 2010 {{{1
+
+- Version 0.11, wasn't packaged correctly and the vimball file
+  contained some garbage. (Thanks Dennis Hostetler!)
+
+0.11: July 28, 2010 {{{1
+
+- Don't set 'winfixwidth' and 'winfixheight' (suggested by Charles Campbell)
+
+0.10: May 20, 2010 {{{1
+
+- Restore cursor position using winrestview() and winsaveview()
+- fix a bug, that prevented the use of visual narrowing
+- Make sure when closing the narrowed buffer, the content will be written to
+  the right original region
+- use topleft for opening the Narrowed window
+- check, that the original buffer is still available
+- If you Narrow the complete buffer using :NRV and write the changes back, an
+  additional trailing line is inserted. Remove that line.
+- When writing the changes back, update the highlighting.
+
+0.9: May 20, 2010 {{{1
+
+- It is now possible to Narrow a window recursively. This allows to have
+  several narrowed windows, and allows for example to only diff certain
+  regions (as was suggested in a recent thread at the vim_use mailinglist:
+  http://groups.google.com/group/vim_use/msg/05d7fd9bd1556f0e) therefore, the
+  use for the g:nrrw_rgn_sepwin variable isn't necessary anymore.
+- Small documentation updates
+
+0.8: May 18, 2010 {{{1
+
+- the g:nrrw_rgn_sepwin variable can be used to force separate Narrowed
+  Windows, so you could easily diff those windows.
+- make the separating of several windows a little bit safer (look at the
+  bufnr(), so it should work without problems for several buffers)
+- switch from script local variables to buffer local variables, so narrowing
+  for several buffers should work.
+- set 'winfixheight' for narrowed window
+- Added command :NRV (suggested by Charles Campbell, thanks!)
+- added error handling, in case :NRV is called, without a selected region
+- take care of beeps, when calling :NRV
+- output WarningMsg
+
+0.7: May 17, 2010 {{{1
+
+- really use the black hole register for deleting the old buffer contents in
+  the narrowed buffer (suggestion by esquifit in
+  http://groups.google.com/group/comp.editors/msg/3eb3e3a7c68597db)
+- make autocommand nesting, so the highlighting will be removed when writing
+  the buffer contents.
+- Use g:nrrw_rgn_nohl variable to disable highlighting (as this can be
+  disturbing).
+
+0.6: May 04, 2010 {{{1
+
+- the previous version had problems restoring the orig buffer, this version
+  fixes it (highlighting and setl ma did not work correctly)
+
+0.5: May 04, 2010 {{{1
+
+- The mapping that allows for narrowing a visually selected range, did not
+  work.  (Fixed!)
+- Make :WidenRegion work as expected (close the widened window) (unreleased)
+
+0.4: Apr 28, 2010 {{{1
+
+- Highlight narrowed region in the original buffer
+- Save and Restore search-register
+- Provide shortcut commands |:NR|
+- Provide command |:NW| and |:NarrowWindow|
+- Make plugin autoloadable
+- Enable GLVS (see |:GLVS|)
+- Provide Documenation (:h NarrowRegion)
+- Distribute Plugin as vimball |pi_vimball.txt|
+
+0.3: Apr 28, 2010 {{{1
+
+- Initial upload
+- development versions are available at the github repository
+- put plugin on a public repository (http://github.com/chrisbra/NrrwRgn)
+
+  }}}
+==============================================================================
+Modeline:
+vim:tw=78:ts=8:ft=help:et:fdm=marker:fdl=0:norl

config/neovim/store/lazy-plugins/NrrwRgn/doc/tags

@@ -0,0 +1,50 @@
+:NR	NarrowRegion.txt	/*:NR*
+:NRL	NarrowRegion.txt	/*:NRL*
+:NRMulti	NarrowRegion.txt	/*:NRMulti*
+:NRN	NarrowRegion.txt	/*:NRN*
+:NRNoSyncOnWrite	NarrowRegion.txt	/*:NRNoSyncOnWrite*
+:NRPrepare	NarrowRegion.txt	/*:NRPrepare*
+:NRS	NarrowRegion.txt	/*:NRS*
+:NRSyncOnWrite	NarrowRegion.txt	/*:NRSyncOnWrite*
+:NRUnprepare	NarrowRegion.txt	/*:NRUnprepare*
+:NRV	NarrowRegion.txt	/*:NRV*
+:NUD	NarrowRegion.txt	/*:NUD*
+:NW	NarrowRegion.txt	/*:NW*
+:NarrowRegion	NarrowRegion.txt	/*:NarrowRegion*
+:NarrowWindow	NarrowRegion.txt	/*:NarrowWindow*
+:WR	NarrowRegion.txt	/*:WR*
+:WidenRegion	NarrowRegion.txt	/*:WidenRegion*
+<Plug>NrrwrgnDo	NarrowRegion.txt	/*<Plug>NrrwrgnDo*
+<Plug>NrrwrgnWinIncr	NarrowRegion.txt	/*<Plug>NrrwrgnWinIncr*
+NR-HowTo	NarrowRegion.txt	/*NR-HowTo*
+NR-hooks	NarrowRegion.txt	/*NR-hooks*
+NR-multi-example	NarrowRegion.txt	/*NR-multi-example*
+NarrowRegion	NarrowRegion.txt	/*NarrowRegion*
+NrrwRgn-config	NarrowRegion.txt	/*NrrwRgn-config*
+NrrwRgn-feedback	NarrowRegion.txt	/*NrrwRgn-feedback*
+NrrwRgn-func	NarrowRegion.txt	/*NrrwRgn-func*
+NrrwRgn-history	NarrowRegion.txt	/*NrrwRgn-history*
+NrrwRgn-hook	NarrowRegion.txt	/*NrrwRgn-hook*
+NrrwRgn-manual	NarrowRegion.txt	/*NrrwRgn-manual*
+NrrwRgn-tips	NarrowRegion.txt	/*NrrwRgn-tips*
+NrrwRgn.txt	NarrowRegion.txt	/*NrrwRgn.txt*
+NrrwRgnPlugin	NarrowRegion.txt	/*NrrwRgnPlugin*
+b:nrrw_aucmd_close	NarrowRegion.txt	/*b:nrrw_aucmd_close*
+b:nrrw_aucmd_create	NarrowRegion.txt	/*b:nrrw_aucmd_create*
+b:nrrw_aucmd_writepost	NarrowRegion.txt	/*b:nrrw_aucmd_writepost*
+b:nrrw_aucmd_written	NarrowRegion.txt	/*b:nrrw_aucmd_written*
+g:nrrw_custom_options	NarrowRegion.txt	/*g:nrrw_custom_options*
+g:nrrw_rgn_hl	NarrowRegion.txt	/*g:nrrw_rgn_hl*
+g:nrrw_rgn_incr	NarrowRegion.txt	/*g:nrrw_rgn_incr*
+g:nrrw_rgn_nohl	NarrowRegion.txt	/*g:nrrw_rgn_nohl*
+g:nrrw_rgn_nomap_Nr	NarrowRegion.txt	/*g:nrrw_rgn_nomap_Nr*
+g:nrrw_rgn_nomap_nr	NarrowRegion.txt	/*g:nrrw_rgn_nomap_nr*
+g:nrrw_rgn_protect	NarrowRegion.txt	/*g:nrrw_rgn_protect*
+g:nrrw_rgn_rel_max	NarrowRegion.txt	/*g:nrrw_rgn_rel_max*
+g:nrrw_rgn_rel_min	NarrowRegion.txt	/*g:nrrw_rgn_rel_min*
+g:nrrw_rgn_resize_window	NarrowRegion.txt	/*g:nrrw_rgn_resize_window*
+g:nrrw_rgn_update_orig_win,	NarrowRegion.txt	/*g:nrrw_rgn_update_orig_win,*
+g:nrrw_rgn_vert	NarrowRegion.txt	/*g:nrrw_rgn_vert*
+g:nrrw_rgn_wdth	NarrowRegion.txt	/*g:nrrw_rgn_wdth*
+g:nrrw_topbot_leftright	NarrowRegion.txt	/*g:nrrw_topbot_leftright*
+nrrwrgn#NrrwRgnStatus()	NarrowRegion.txt	/*nrrwrgn#NrrwRgnStatus()*

config/neovim/store/lazy-plugins/NrrwRgn/plugin/NrrwRgn.vim

@@ -0,0 +1,91 @@
+" NrrwRgn.vim - Narrow Region plugin for Vim
+" -------------------------------------------------------------
+" Version:	   0.33
+" Maintainer:  Christian Brabandt <cb@256bit.org>
+" Last Change: Thu, 15 Jan 2015 20:52:29 +0100
+" Script: http://www.vim.org/scripts/script.php?script_id=3075
+" Copyright:   (c) 2009-2015 by Christian Brabandt
+"			   The VIM LICENSE applies to NrrwRgn.vim
+"			   (see |copyright|) except use "NrrwRgn.vim"
+"			   instead of "Vim".
+"			   No warranty, express or implied.
+"	 *** ***   Use At-Your-Own-Risk!   *** ***
+" GetLatestVimScripts: 3075 33 :AutoInstall: NrrwRgn.vim
+"
+" Init: {{{1
+let s:cpo= &cpo
+if exists("g:loaded_nrrw_rgn") || &cp
+  finish
+endif
+set cpo&vim
+let g:loaded_nrrw_rgn = 1
+
+" Debug Setting
+let s:debug=0
+if s:debug
+	exe "call nrrwrgn#Debug(1)"
+endif
+
+" ----------------------------------------------------------------------------
+" Public Interface: {{{1
+
+" plugin functions "{{{2
+fun! <sid>NrrwRgnOp(type, ...) " {{{3
+	" used for operator function mapping
+	let sel_save = &selection
+	let &selection = "inclusive"
+	if a:0  " Invoked from Visual mode, use '< and '> marks.
+		sil exe "normal! `<" . a:type . "`>y"
+	elseif a:type == 'line'
+		sil exe "normal! '[V']y"
+	elseif a:type == 'block'
+		sil exe "normal! `[\<C-V>`]y"
+	else
+		sil exe "normal! `[v`]y"
+	endif
+	call nrrwrgn#NrrwRgn(visualmode(), '')
+	let &selection = sel_save
+endfu
+
+" Define the Command aliases "{{{2
+com! -range -bang NRPrepare :<line1>,<line2>NRP<bang>
+com! -bang -range NarrowRegion :<line1>,<line2>NR
+com! -bang NRMulti :NRM<bang>
+com! -bang NarrowWindow :NW
+com! -bang NRLast :NRL
+
+" Define the actual Commands "{{{2
+com! -range -bang NR	 :<line1>, <line2>call nrrwrgn#NrrwRgn('',<q-bang>)
+com! -range -bang NRP    :<line1>, <line2>call nrrwrgn#Prepare(<q-bang>)
+com! -bang -range NRV :call nrrwrgn#NrrwRgn(visualmode(), <q-bang>)
+com! -range NRUnprepare    :<line1>, <line2>call nrrwrgn#Unprepare()
+com! NUD :call nrrwrgn#UnifiedDiff()
+com! -bang NW	 :exe ":" . line('w0') . ',' . line('w$') . "call nrrwrgn#NrrwRgn(0,<q-bang>)"
+com! -bang NRM :call nrrwrgn#NrrwRgnDoMulti(<q-bang>)
+com! -bang NRL :call nrrwrgn#LastNrrwRgn(<q-bang>)
+
+" Define the Mapping: "{{{2
+if !hasmapto('<Plug>NrrwrgnDo') && !get(g:, 'nrrw_rgn_nomap_nr', 0)
+	xmap <unique> <Leader>nr <Plug>NrrwrgnDo
+	nmap <unique> <Leader>nr <Plug>NrrwrgnDo
+endif
+if !hasmapto('<Plug>NrrwrgnBangDo') && !get(g:, 'nrrw_rgn_nomap_Nr', 0)
+	xmap <unique> <Leader>Nr <Plug>NrrwrgnBangDo
+endif
+if !hasmapto('VisualNrrwRgn')
+	xnoremap <unique> <script> <Plug>NrrwrgnDo <sid>VisualNrrwRgn
+	nnoremap <unique> <script> <Plug>NrrwrgnDo <sid>VisualNrrwRgn
+endif
+if !hasmapto('VisualNrrwRgnBang')
+	xnoremap <unique> <script> <Plug>NrrwrgnBangDo <sid>VisualNrrwBang
+endif
+xnoremap <sid>VisualNrrwRgn  :<c-u>call nrrwrgn#NrrwRgn(visualmode(),'')<cr>
+xnoremap <sid>VisualNrrwBang :<c-u>call nrrwrgn#NrrwRgn(visualmode(),'!')<cr>
+
+" operator function
+nnoremap <sid>VisualNrrwRgn :set opfunc=<sid>NrrwRgnOp<cr>g@
+
+" Restore: "{{{1
+let &cpo=s:cpo
+unlet s:cpo
+" vim: ts=4 sts=4 fdm=marker com+=l\:\"

config/neovim/store/lazy-plugins/NrrwRgn/post.pl

@@ -0,0 +1,58 @@
+#!/usr/bin/perl
+use strict;
+use warnings;
+
+use WWW::Mechanize;
+
+sub GetPassword() {
+	my $i=0;
+	my @pass;
+	my $passfile="./vim_passfile"; # line1: username, line2: password
+	open(PASS, '<',$passfile) or die "Can't open passwordfile: $passfile\n";
+	while(<PASS>){
+		chomp;
+		$pass[$i++] = $_;
+	}
+	close(PASS);
+	return @pass;
+}
+
+my $sid=3075;
+my $file;
+my @files=glob('*.vmb');
+#my $scriptversion=shift @ARGV;
+my $scriptversion = 0;
+my $versioncomment=shift @ARGV;
+unless ($versioncomment){
+	print "Please enter comment!\n";
+	exit;
+}
+$versioncomment.="\n(automatically uploaded)";
+
+
+my @userpasswordpair = GetPassword();
+for (@files) {
+	my $f = $_ if [ -f $_ ] && $_ =~ /\w+-[^.]+\.(\d+)\.vmb/;
+	if ($1 > $scriptversion) {
+		$scriptversion=$1;
+		$file = $f;
+	}
+}
+
+my $mech=WWW::Mechanize->new(autocheck => 1);
+$mech->get("http://www.vim.org/login.php");
+$mech->submit_form(
+    form_name => "login",
+    with_fields => {
+        userName => $userpasswordpair[0],
+        password => $userpasswordpair[1],
+    },
+);
+$mech->get("http://www.vim.org/scripts/script.php?script_id=$sid");
+$mech->follow_link(text => 'upload new version');
+$mech->form_name("script");
+$mech->field(script_file => $file);
+$mech->field(vim_version => 7.4);
+$mech->field(script_version => $scriptversion);
+$mech->field(version_comment => $versioncomment);
+$mech->click_button(value => "upload");

config/neovim/store/lazy-plugins/NrrwRgn/test/runtest.sh

@@ -0,0 +1,8 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/sh
+
+for i in */; do
+    cd "$i"
+    ./cmd.sh
+    rm -f *.mod
+    cd - > /dev/null
+done

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/1.txt

@@ -0,0 +1 @@
+foobar 1.txt

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/1.txt.ok

@@ -0,0 +1 @@
+foobar 1.txt some more stuff

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/2.txt

@@ -0,0 +1 @@
+foobar 2.txt

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/2.txt.ok

@@ -0,0 +1 @@
+foobar 2.txt some more stuff

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/3.txt

@@ -0,0 +1 @@
+foobar 3.txt

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/3.txt.ok

@@ -0,0 +1 @@
+foobar 3.txt some more stuff

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/cmd.sh

@@ -0,0 +1,23 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/bash
+#set -x
+
+dir="$(realpath ../..)"
+LC_ALL=C vim -u NONE -N \
+    --cmd ':set noswapfile hidden' \
+    --cmd 'argadd *.txt' \
+    -c "sil :so $dir/plugin/NrrwRgn.vim" \
+    -c 'sil :bufdo :NRP' \
+    -c 'sil :NRM' \
+    -c 'sil :g/^foobar.*/s//& some more stuff/' \
+    -c 'sil :wq' \
+    -c ':bufdo if bufname("")=~"^\\d\\.txt$"|saveas! %.mod|endif' \
+    -c ':qa!'
+
+rt=$(diff -uN0 <(cat *.mod) <(cat *.ok))
+if [ "$?" -ne 0 ]; then
+    printf "Test1 failed\n"
+    printf "Diff:\n%s" "$rt"
+    exit 2;
+else
+    printf "Test1 successful!\n"
+fi

config/neovim/store/lazy-plugins/NrrwRgn/test/test1/description.md

@@ -0,0 +1 @@
+## Test 1: Multi Narrowed Window for several distinct buffers ##

config/neovim/store/lazy-plugins/NrrwRgn/test/test2/1.txt

@@ -0,0 +1,4 @@
+This is a single test.
+Line 2
+Line 3
+Line 4

config/neovim/store/lazy-plugins/NrrwRgn/test/test2/1.txt.ok

@@ -0,0 +1,6 @@
+This is a single test.
+Line 2
+Line 3
+Line 4
+Added Line
+Added after Narrowing Line

config/neovim/store/lazy-plugins/NrrwRgn/test/test2/cmd.sh

@@ -0,0 +1,24 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/bash
+#set -x
+
+Test="Test2"
+
+dir="$(realpath ../..)"
+LC_ALL=C vim -u NONE -N \
+    --cmd ':set noswapfile hidden' \
+    -c "sil :so $dir/plugin/NrrwRgn.vim" \
+    -c 'sil :1,$NR' \
+    -c 'sil :$put =\"Added Line\"' \
+    -c 'sil :wq' \
+    -c 'sil :$put =\"Added after Narrowing Line\"' \
+    -c ':bufdo if bufname("")=~"^\\d\\.txt$"|saveas! %.mod|endif' \
+    -c ':qa!' 1.txt
+
+rt=$(diff -uN0 <(cat *.mod) <(cat *.ok))
+if [ "$?" -ne 0 ]; then
+    printf "$Test failed\n"
+    printf "Diff:\n%s" "$rt"
+    exit 2;
+else
+    printf "$Test successful!\n"
+fi

config/neovim/store/lazy-plugins/NrrwRgn/test/test2/description.md

@@ -0,0 +1 @@
+## Test 2: Single Narrowed Window for a single buffers ##

config/neovim/store/lazy-plugins/NrrwRgn/test/test3/1.txt

@@ -0,0 +1,4 @@
+This is a single test.
+Line 2
+Line 3
+Line 4

config/neovim/store/lazy-plugins/NrrwRgn/test/test3/1.txt.ok

@@ -0,0 +1,6 @@
+This is a single test.
+Line 2
+Line 3
+Line 4
+Added Line
+Added after Narrowing Line

config/neovim/store/lazy-plugins/NrrwRgn/test/test3/cmd.sh

@@ -0,0 +1,26 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/bash
+#set -x
+
+Test="Test3"
+
+dir="$(realpath ../..)"
+LC_ALL=C vim -u NONE -N \
+    --cmd ':set noswapfile hidden' \
+    -c "sil :so $dir/plugin/NrrwRgn.vim" \
+    -c 'sp description.md | noa wincmd p | :e 1.txt' \
+    -c 'sil :1,$NR' \
+    -c 'sil :$put =\"Added Line\"' \
+    -c 'sil :wq' \
+    -c '2wincmd w' \
+    -c 'sil :$put =\"Added after Narrowing Line\"' \
+    -c ':bufdo if bufname("")=~"^\\d\\.txt$"|saveas! %.mod|endif' \
+    -c ':qa!'
+
+rt=$(diff -uN0 <(cat *.mod) <(cat *.ok))
+if [ "$?" -ne 0 ]; then
+    printf "$Test failed\n"
+    printf "Diff:\n%s" "$rt"
+    exit 2;
+else
+    printf "$Test successful!\n"
+fi

config/neovim/store/lazy-plugins/NrrwRgn/test/test3/description.md

@@ -0,0 +1 @@
+## Test 2: Single Narrowed Window for a single buffer, but has another split window ##

config/neovim/store/lazy-plugins/NrrwRgn/test/test4/1.txt

@@ -0,0 +1,4 @@
+This is a single test.
+Line 2
+Line 3
+Line 4

config/neovim/store/lazy-plugins/NrrwRgn/test/test4/1.txt.ok

@@ -0,0 +1,6 @@
+This is a single test.
+Line 2
+Line 3
+Line 4
+Added Line
+Added another Line

config/neovim/store/lazy-plugins/NrrwRgn/test/test4/cmd.sh

@@ -0,0 +1,26 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/bash
+#set -x
+
+Test="Test4"
+
+dir="$(realpath ../..)"
+LC_ALL=C vim -u NONE -N \
+    --cmd ':set noswapfile hidden' \
+    -c "sil :so $dir/plugin/NrrwRgn.vim" \
+    -c ':e 1.txt' \
+    -c 'sil :1,$NR!' \
+    -c 'sil :$put =\"Added Line\"' \
+    -c ':w|b#' \
+    -c ':saveas! 1.txt.mod' \
+    -c '2b|w|b#|b#' \
+    -c 'sil :$put =\"Added another Line\"' \
+    -c ':w|b#|wq!'
+
+rt=$(diff -uN0 <(cat *.mod) <(cat *.ok))
+if [ "$?" -ne 0 ]; then
+    printf "$Test failed\n"
+    printf "Diff:\n%s\n" "$rt"
+    exit 2;
+else
+    printf "$Test successful!\n"
+fi

config/neovim/store/lazy-plugins/NrrwRgn/test/test4/description.md

@@ -0,0 +1 @@
+## Test 4: Single Narrowed Window for a single buffer, switching back and forth between buffers several times (issue #44)

config/neovim/store/lazy-plugins/NrrwRgn/test/test5/1.txt

@@ -0,0 +1,4 @@
+This is a single test.
+Line 2
+Line 3
+Line 4

config/neovim/store/lazy-plugins/NrrwRgn/test/test5/1.txt.ok

@@ -0,0 +1,6 @@
+This is a single test.
+Line 2
+Line 3
+Line 4
+Added Line
+[]

config/neovim/store/lazy-plugins/NrrwRgn/test/test5/cmd.sh

@@ -0,0 +1,25 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/bash
+#set -x
+
+Test=`basename $PWD`
+
+dir="$(realpath ../..)"
+LC_ALL=C vim -u NONE -N \
+    --cmd ':set noswapfile hidden' \
+    -c "sil :so $dir/plugin/NrrwRgn.vim" \
+    -c ':e 1.txt' \
+    -c ':saveas! 1.txt.mod' \
+    -c 'sil :1,$NR!' \
+    -c 'sil :$put =\"Added Line\"' \
+    -c ':wq' \
+    -c ':$put =string(getmatches())' \
+    -c ':wq!'
+
+rt=$(diff -uN0 <(cat *.mod) <(cat *.ok))
+if [ "$?" -ne 0 ]; then
+    printf "$Test failed\n"
+    printf "Diff:\n%s\n" "$rt"
+    exit 2;
+else
+    printf "$Test successful!\n"
+fi

config/neovim/store/lazy-plugins/NrrwRgn/test/test5/description.md

@@ -0,0 +1 @@
+## Test 5: Make sure, highlighting is removed after closing narrowed window

config/neovim/store/lazy-plugins/NrrwRgn/test/test6/1.txt

@@ -0,0 +1,4 @@
+This is a single test.
+Line 2
+Line 3
+Line 4

config/neovim/store/lazy-plugins/NrrwRgn/test/test6/1.txt.ok

@@ -0,0 +1,6 @@
+This is a single test.
+Line 2
+Line 3
+Line 4
+Added Line
+[]

config/neovim/store/lazy-plugins/NrrwRgn/test/test6/cmd.sh

@@ -0,0 +1,25 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/bash
+#set -x
+
+Test=`basename $PWD`
+
+dir="$(realpath ../..)"
+LC_ALL=C vim -u NONE -N \
+    --cmd ':set noswapfile hidden' \
+    -c "sil :so $dir/plugin/NrrwRgn.vim" \
+    -c ':e 1.txt' \
+    -c ':saveas! 1.txt.mod' \
+    -c 'exe ":1norm VG"|:norm \nr' \
+    -c 'sil :$put =\"Added Line\"' \
+    -c ':wq' \
+    -c ':$put =string(getmatches())' \
+    -c ':wq!'
+
+rt=$(diff -uN0 <(cat *.mod) <(cat *.ok))
+if [ "$?" -ne 0 ]; then
+    printf "$Test failed\n"
+    printf "Diff:\n%s\n" "$rt"
+    exit 2;
+else
+    printf "$Test successful!\n"
+fi

config/neovim/store/lazy-plugins/NrrwRgn/test/test6/description.md

@@ -0,0 +1 @@
+## Test 6: Make sure, highlighting is removed after closing narrowed window (for visual narrowed region)

config/neovim/store/lazy-plugins/NrrwRgn/test/test7/1.txt

@@ -0,0 +1,4 @@
+This is a single test.
+Line 2
+Line 3
+Line 4

config/neovim/store/lazy-plugins/NrrwRgn/test/test7/1.txt.ok

@@ -0,0 +1,5 @@
+This is a single test.
+Line 2
+Line 3
+Line 4
+[]

config/neovim/store/lazy-plugins/NrrwRgn/test/test7/cmd.sh

@@ -0,0 +1,25 @@
+#!/nix/store/izpf49b74i15pcr9708s3xdwyqs4jxwl-bash-5.2p32/bin/bash
+#set -x
+
+Test=`basename $PWD`
+
+dir="$(realpath ../..)"
+LC_ALL=C vim -u NONE -N \
+    --cmd ':set noswapfile hidden' \
+    -c "sil :so $dir/plugin/NrrwRgn.vim" \
+    -c ':e 1.txt' \
+    -c ':saveas! 1.txt.mod' \
+    -c ':%NR' \
+    -c ':q!' \
+    -c ':set modifiable' \
+    -c ':$put =string(getmatches())' \
+    -c ':wq!'
+
+rt=$(diff -uN0 <(cat *.mod) <(cat *.ok))
+if [ "$?" -ne 0 ]; then
+    printf "$Test failed\n"
+    printf "Diff:\n%s\n" "$rt"
+    exit 2;
+else
+    printf "$Test successful!\n"
+fi

config/neovim/store/lazy-plugins/NrrwRgn/test/test7/description.md

@@ -0,0 +1 @@
+## Test 6: Make sure, highlighting is removed after aborting narrowed window (issue #44)

config/neovim/store/lazy-plugins/NrrwRgn/todo.txt

@@ -0,0 +1,31 @@
+(issues to work on, in the order of importance):
+
+- clean up does not work? (instn data isn't removed after :wq in narrowed window)
+
+- When disabling Narrowing using :NRN and one quits the buffer,
+  should the highlighting be removed? (it doesn't yet)
+
+- I really need some tests, like:
+  * Visual Narrowing
+  * Narrowing 1 Region
+  * Narrowing several independent regions with setting the g:nrrw_rgn_protect
+    variable
+  * Multi line narrowing
+
+### Resolved
+- When switching buffers using :b in the window, that was narrowed, the highlighting is keept.
+  (should be resolved)
+
+- highlighting wrong for char visual mode
+ (e.g. select a word, press \nr and the whole line will be highlighted)
+
+- Use nrrwrgn#NrrwRgnStatus() to make a nice statusline for e.g. vim-airline
+-> latest airline supports a nice statusline for narrowed window
+
+- Implement MultiEditing for :NRM
+  (see https://github.com/felixr/vim-multiedit/blob/master/plugin/multiedit.vim
+   and http://blog.felixriedel.com/2012/06/multi-editing-in-vim/)
+  -> Invalid: multiple cursors is different, not part of a narrowed feature
+
+- New Mapping. The motion over which one moves will be opened in a narrowed window.
+  -> <leader>nr in normal mode

config/neovim/store/lazy-plugins/better-escape.nvim/.github/FUNDING.yml

@@ -0,0 +1,2 @@
+github: 'max397574'
+custom: [ 'https://buymeacoffee.com/max397574' ]

config/neovim/store/lazy-plugins/better-escape.nvim/.github/workflows/release_please.yml

@@ -0,0 +1,17 @@
+name: Release Please
+
+on:
+  push:
+    branches:
+      - master
+
+jobs:
+  release:
+    name: Release
+    runs-on: ubuntu-latest
+    steps:
+      - uses: google-github-actions/release-please-action@v3
+        with:
+          token: ${{ secrets.PAT }}
+          release-type: simple
+          package-name: better-escape.nvim

config/neovim/store/lazy-plugins/better-escape.nvim/.gitignore

@@ -0,0 +1 @@
+.DS_Store

config/neovim/store/lazy-plugins/better-escape.nvim/CHANGELOG.md

@@ -0,0 +1,43 @@
+# Changelog
+
+## [2.3.2](https://github.com/max397574/better-escape.nvim/compare/v2.3.1...v2.3.2) (2024-07-27)
+
+
+### Bug Fixes
+
+* macro regression ([25a1400](https://github.com/max397574/better-escape.nvim/commit/25a14001e587ce3068b3b2204c330fdd5a09b877))
+
+## [2.3.1](https://github.com/max397574/better-escape.nvim/compare/v2.3.0...v2.3.1) (2024-07-20)
+
+
+### Bug Fixes
+
+* change nvim_input to nvim_feedkeys ([ea38a94](https://github.com/max397574/better-escape.nvim/commit/ea38a944837e00e4a9f62614cb46bdccf3cda976))
+* change nvim_input to nvim_feedkeys for function mappings ([ec832a0](https://github.com/max397574/better-escape.nvim/commit/ec832a05c1f6c7826cc209bede6fbc2d0d50b1c1))
+* other plugin's feedkeys ([9cbc693](https://github.com/max397574/better-escape.nvim/commit/9cbc6934e9258dc95405fcb3f7fdab499e5606be))
+* unmap after applying configuration, fixes https://github.com/max397574/better-escape.nvim/issues/89 ([975cceb](https://github.com/max397574/better-escape.nvim/commit/975cceb1d7b841f16731862132a0ffb2acda3f8b))
+
+## [2.3.0](https://github.com/max397574/better-escape.nvim/compare/v2.2.0...v2.3.0) (2024-07-09)
+
+
+### Features
+
+* add `default_mappings` option and update docs ([7b35162](https://github.com/max397574/better-escape.nvim/commit/7b351629d4f08039977e290961915d916a985aa3))
+
+
+### Bug Fixes
+
+* clear_mappings' postion ([3dbf3e1](https://github.com/max397574/better-escape.nvim/commit/3dbf3e1626d9180c4f42e3aa39dd47a1c046cd8b))
+* log the endkey not the startkey ([#74](https://github.com/max397574/better-escape.nvim/issues/74)) ([3b41a90](https://github.com/max397574/better-escape.nvim/commit/3b41a905799577e3259ead9056bcabb72dedf537))
+
+## [2.2.0](https://github.com/max397574/better-escape.nvim/compare/v2.1.1...v2.2.0) (2024-07-08)
+
+
+### Features
+
+* add release please ([769c1e2](https://github.com/max397574/better-escape.nvim/commit/769c1e2d349731cb0d78da440a68b50485140d64))
+
+
+### Bug Fixes
+
+* make the sequence &lt;subkey&gt;<key><subkey> work ([#70](https://github.com/max397574/better-escape.nvim/issues/70)) ([9ba7653](https://github.com/max397574/better-escape.nvim/commit/9ba7653f376da79e858dc5f413157621d0b507c7))

config/neovim/store/lazy-plugins/better-escape.nvim/LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

config/neovim/store/lazy-plugins/better-escape.nvim/lua/better_escape.lua

@@ -0,0 +1,182 @@
+local M = {}
+local uv = vim.uv or vim.loop
+local t = function(str)
+    return vim.api.nvim_replace_termcodes(str, true, true, true)
+end
+
+M.waiting = false
+
+local settings = {
+    timeout = vim.o.timeoutlen,
+    default_mappings = true,
+    mappings = {
+        i = {
+            --  first_key[s]
+            j = {
+                --  second_key[s]
+                k = "<Esc>",
+                j = "<Esc>",
+            },
+        },
+        c = {
+            j = {
+                k = "<Esc>",
+                j = "<Esc>",
+            },
+        },
+        t = {
+            j = {
+                k = "<C-\\><C-n>",
+            },
+        },
+        v = {
+            j = {
+                k = "<Esc>",
+            },
+        },
+        s = {
+            j = {
+                k = "<Esc>",
+            },
+        },
+    },
+}
+
+local function unmap_keys()
+    for mode, keys in pairs(settings.mappings) do
+        for key, subkeys in pairs(keys) do
+            pcall(vim.keymap.del, mode, key)
+            for subkey, _ in pairs(subkeys) do
+                pcall(vim.keymap.del, mode, subkey)
+            end
+        end
+    end
+end
+
+-- WIP: move this into recorder.lua ?
+-- When a first_key is pressed, `recorded_key` is set to it
+-- (e.g. if jk is a mapping, when 'j' is pressed, `recorded_key` is set to 'j')
+local recorded_key = nil
+local bufmodified = nil
+local timeout_timer = uv.new_timer()
+local has_recorded = false -- See `vim.on_key` below
+local function record_key(key)
+    if timeout_timer:is_active() then
+        timeout_timer:stop()
+    end
+    bufmodified = vim.bo.modified
+    recorded_key = key
+    has_recorded = true
+    M.waiting = true
+    timeout_timer:start(settings.timeout, 0, function()
+        M.waiting = false
+        recorded_key = nil
+    end)
+end
+
+vim.on_key(function(_, typed)
+    if typed == "" then
+        return
+    end
+    if has_recorded == false then
+        -- If the user presses a key that doesn't get recorded, remove the previously recorded key.
+        recorded_key = nil
+        return
+    end
+    has_recorded = false
+end)
+
+-- List of keys that undo the effect of pressing first_key
+local undo_key = {
+    i = "<bs>",
+    c = "<bs>",
+    t = "<bs>",
+}
+
+local function map_keys()
+    for mode, first_keys in pairs(settings.mappings) do
+        local map_opts = { expr = true }
+        for first_key, _ in pairs(first_keys) do
+            vim.keymap.set(mode, first_key, function()
+                record_key(first_key)
+                return first_key
+            end, map_opts)
+        end
+        for _, second_keys in pairs(first_keys) do
+            for second_key, mapping in pairs(second_keys) do
+                if not mapping then
+                    goto continue
+                end
+                vim.keymap.set(mode, second_key, function()
+                    -- If a first_key wasn't recorded, record second_key because it might be a first_key for another sequence.
+                    -- TODO: Explicitly, check if it's a starting key. I don't think that's necessary right now.
+                    if recorded_key == nil then
+                        record_key(second_key)
+                        return second_key
+                    end
+                    -- If a key was recorded, but it isn't the first_key for second_key, record second_key(second_key might be a first_key for another sequence)
+                    -- Or if the recorded_key was just a second_key
+                    if
+                        not (
+                            first_keys[recorded_key]
+                            and first_keys[recorded_key][second_key]
+                        )
+                    then
+                        record_key(second_key)
+                        return second_key
+                    end
+                    local keys = ""
+                    keys = keys
+                        .. t(
+                            (undo_key[mode] or "")
+                                .. (
+                                    ("<cmd>setlocal %smodified<cr>"):format(
+                                        bufmodified and "" or "no"
+                                    )
+                                )
+                        )
+                    if type(mapping) == "string" then
+                        keys = keys .. t(mapping)
+                    elseif type(mapping) == "function" then
+                        keys = keys .. t(mapping() or "")
+                    end
+                    vim.api.nvim_feedkeys(keys, "in", false)
+                end, map_opts)
+                ::continue::
+            end
+        end
+    end
+end
+
+function M.setup(update)
+    if update and update.default_mappings == false then
+        settings.mappings = {}
+    end
+    settings = vim.tbl_deep_extend("force", settings, update or {})
+    if settings.keys or settings.clear_empty_lines then
+        vim.notify(
+            "[better-escape.nvim]: Rewrite! Check: https://github.com/max397574/better-escape.nvim",
+            vim.log.levels.WARN,
+            {}
+        )
+    end
+    if settings.mapping then
+        vim.notify(
+            "[better-escape.nvim]: Rewrite! Check: https://github.com/max397574/better-escape.nvim",
+            vim.log.levels.WARN,
+            {}
+        )
+        if type(settings.mapping) == "string" then
+            settings.mapping = { settings.mapping }
+        end
+        for _, mapping in ipairs(settings.mappings) do
+            settings.mappings.i[mapping:sub(1, 2)] = {}
+            settings.mappings.i[mapping:sub(1, 1)][mapping:sub(2, 2)] =
+                settings.keys
+        end
+    end
+    unmap_keys()
+    map_keys()
+end
+
+return M

config/neovim/store/lazy-plugins/better-escape.nvim/readme.md

@@ -0,0 +1,160 @@
+# better-escape.nvim
+
+![better-escape](https://github.com/max397574/better-escape.nvim/assets/81827001/8863a620-b075-4417-92d0-7eb2d2646186)
+
+A lot of people have mappings like `jk` or `jj` to escape insert mode. The
+problem with this mappings is that whenever you type a `j`, neovim wait about
+100-500ms (depending on your timeoutlen) to see, if you type a `j` or a `k`
+because these are mapped. Only after that time the `j` will be inserted. Then
+you always get a delay when typing a `j`.
+
+An example where this has a big impact is e.g. telescope. Because the characters
+which are mapped aren't really inserted at first the whole filtering isn't
+instant.
+
+![better-escape-tele](https://github.com/max397574/better-escape.nvim/assets/81827001/390f115d-87cd-43d8-aadf-fffb12bd84c9)
+
+## ✨Features
+
+- Write mappings in many modes without having a delay when typing
+- Customizable timeout
+- Map key sequences and lua functions
+- Use multiple mappings
+- Really small and fast
+
+## 📦Installation
+
+Use your favourite package manager and call the setup function.
+
+```lua
+-- lua with lazy.nvim
+{
+  "max397574/better-escape.nvim",
+  config = function()
+    require("better_escape").setup()
+  end,
+}
+```
+
+## ❗Rewrite
+
+There was a big rewrite which allows much more flexibility now. You can now
+define mappings in most modes and also use functions.
+
+The biggest change was that the `mapping` config option was removed. Check the
+default configuration below to see the new structure.
+
+This also deprecated the `clear_empty_lines` setting. You can replicate this
+behavior by setting a mapping to a function like this:
+
+```lua
+-- `k` would be the second key of a mapping
+k = function()
+    vim.api.nvim_input("<esc>")
+    local current_line = vim.api.nvim_get_current_line()
+    if current_line:match("^%s+j$") then
+        vim.schedule(function()
+            vim.api.nvim_set_current_line("")
+        end)
+    end
+end
+```
+
+## ⚙️Customization
+
+Call the setup function with your options as arguments.
+
+After the rewrite you can also use any function. So you could for example map
+`<space><tab>` to jump with luasnip like this:
+
+```lua
+i = {
+    [" "] = {
+        ["<tab>"] = function()
+            -- Defer execution to avoid side-effects
+            vim.defer_fn(function()
+                -- set undo point
+                vim.o.ul = vim.o.ul
+                require("luasnip").expand_or_jump()
+            end, 1)
+        end
+    }
+}
+```
+
+### Disable mappings
+To disable keys set them to `false` in the configuration.
+You can also disable all default mappings by setting the `default_mappings` option to false.
+
+<details>
+<summary>Default Config</summary>
+
+```lua
+-- lua, default settings
+require("better_escape").setup {
+    timeout = vim.o.timeoutlen,
+    default_mappings = true,
+    mappings = {
+        i = {
+            j = {
+                -- These can all also be functions
+                k = "<Esc>",
+                j = "<Esc>",
+            },
+        },
+        c = {
+            j = {
+                k = "<Esc>",
+                j = "<Esc>",
+            },
+        },
+        t = {
+            j = {
+                k = "<C-\\><C-n>",
+            },
+        },
+        v = {
+            j = {
+                k = "<Esc>",
+            },
+        },
+        s = {
+            j = {
+                k = "<Esc>",
+            },
+        },
+    },
+}
+```
+
+</details>
+
+## API
+
+`require("better_escape").waiting` is a boolean indicating that it's waiting for
+a mapped sequence to complete.
+
+<details>
+<summary>Statusline example</summary>
+
+```lua
+function escape_status()
+  local ok, m = pcall(require, 'better_escape')
+  return ok and m.waiting and '✺' or ""
+end
+```
+
+</details>
+
+## ❤️ Support
+
+If you like the projects I do and they can help you in your life you can support
+my work with [github sponsors](https://github.com/sponsors/max397574). Every
+support motivates me to continue working on my open source projects.
+
+## Similar plugins
+
+The old version of this plugin was a lua version of
+[better_escape.vim](https://github.com/jdhao/better-escape.vim), with some
+additional features and optimizations. This changed with the rewrite though. Now
+it has much more features.

config/neovim/store/lazy-plugins/better-escape.nvim/stylua.toml

@@ -0,0 +1,5 @@
+column_width = 80
+indent_type = "Spaces"
+indent_width = 4
+quote_style = "AutoPreferDouble"
+no_call_parentheses = false

config/neovim/store/lazy-plugins/catppuccin-nvim/.editorconfig

@@ -0,0 +1,18 @@
+# EditorConfig helps developers define and maintain consistent
+# coding styles between different editors and IDEs
+# EditorConfig is awesome: https://EditorConfig.org
+
+root = true
+
+[*]
+end_of_line = lf
+charset = utf-8
+insert_final_newline = true
+
+[*.lua]
+indent_style = tab
+
+[*.{diff,md}]
+trim_trailing_whitespace = false
+indent_style = space
+indent_size = 4

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,93 @@
+name: Bug report
+description: Report a problem with Catppuccin
+labels: [bug]
+body:
+  - type: textarea
+    attributes:
+      label: "Description"
+      description: "A short description of the problem you are reporting."
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: "Neovim version"
+      description: "Output of `nvim --version` (Catppuccin requires neovim >= 0.8)"
+      render: markdown
+      placeholder: |
+        NVIM v0.9.0
+        Build type: Release
+        LuaJIT 2.1.0-beta3
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: "Terminal and multiplexer"
+      placeholder: "kitty 0.29.2 with tmux 3.3a"
+    validations:
+      required: true
+  - type: markdown
+    attributes:
+      value: |
+        # FOR TMUX USERS
+        FOLLOW THESE GIST BEFORE OPENING THE ISSUE
+        - [Enable true color support](https://gist.github.com/andersevenrud/015e61af2fd264371032763d4ed965b6) to fix the [abnormal colors](https://github.com/catppuccin/nvim/issues/415)
+        - [Enable italic font support](https://gist.github.com/gyribeiro/4192af1aced7a1b555df06bd3781a722) to fix the [incorrect if, then, else, end highlights](https://github.com/catppuccin/nvim/issues/428)
+  - type: input
+    attributes:
+      label: "Catppuccin version / branch / rev"
+      placeholder: "catppuccin v1.4.0"
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: "Steps to reproduce"
+      description: "Steps to reproduce using the minimal config provided below."
+      placeholder: |
+        1. `nvim -u repro.lua`
+        2. ...
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: "Expected behavior"
+      description: "A description of the behavior you expected:"
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: "Actual behavior"
+      description: "Observed behavior (may optionally include logs, images, or videos)."
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Repro
+      description: Minimal `init.lua` to reproduce this issue. Save as `repro.lua` and run with `nvim -u repro.lua`
+      value: |
+        -- DO NOT change the paths and don't remove the colorscheme
+        local root = vim.fn.fnamemodify("./.repro", ":p")
+
+        -- set stdpaths to use .repro
+        for _, name in ipairs({ "config", "data", "state", "cache" }) do
+          vim.env[("XDG_%s_HOME"):format(name:upper())] = root .. "/" .. name
+        end
+
+        -- bootstrap lazy
+        local lazypath = root .. "/plugins/lazy.nvim"
+        if not vim.loop.fs_stat(lazypath) then
+          vim.fn.system({ "git", "clone", "--filter=blob:none", "https://github.com/folke/lazy.nvim.git", lazypath })
+        end
+        vim.opt.runtimepath:prepend(lazypath)
+
+        -- install plugins
+        local plugins = {
+          "catppuccin/nvim",
+          -- add any other plugins here
+        }
+        require("lazy").setup(plugins, {
+          root = root .. "/plugins",
+        })
+
+        vim.cmd.colorscheme("catppuccin")
+        -- add anything else here
+      render: Lua

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,5 @@
+blank_issues_enabled: false
+contact_links:
+   - name: Question
+     url: https://discord.com/servers/catppuccin-907385605422448742
+     about: Join our discord server for real-time answers and more!

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: "Suggest an idea for the project"
+title: ""
+labels: enhancement
+assignees: ""
+---
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is.
+Ex. I'm always frustrated when [...]. My workflow is like this [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+🎉 First off, thanks for taking the time to contribute! 🎉
+
+Here are some guidelines:
+- Format code using [stylua](https://github.com/johnnymorganz/stylua).
+- New plugin integration should be added in alphabetical order:
+  - to the [README](https://github.com/catppuccin/nvim#integrations) (vimdoc is auto-generated).
+  - to [types.lua](https://github.com/catppuccin/nvim/blob/main/lua/catppuccin/types.lua)
+- Create a topic branch on your fork for your specific PR.
+- Use [conventionalcommits.org's](https://www.conventionalcommits.org/en/v1.0.0/)
+  rules for explicit and meaningful commit messages.
+- If it's your first time contributing to a project, then read
+  [About pull requests](https://docs.github.com/en/github/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/about-pull-requests)
+  on Github's docs.
+
+Here are some tips:
+- Use `vim.g.catppuccin_debug = true` to get live config re-loading

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/scripts/update-palette.py

@@ -0,0 +1,14 @@
+import json
+import urllib.request
+
+url = "https://github.com/catppuccin/palette/raw/main/palette.json"
+
+with urllib.request.urlopen(url) as response:
+    flavors = json.loads(response.read().decode())
+
+for flavor in flavors:
+    with open(f"lua/catppuccin/palettes/{flavor}.lua", "w") as f:
+        f.write("return {\n")
+        for color in flavors[flavor]["colors"]:
+            f.write(f'\t{color} = "{flavors[flavor]["colors"][color]["hex"]}",\n')
+        f.write("}\n")

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/workflows/formatting.yml

@@ -0,0 +1,20 @@
+name: StyLua
+on:
+  pull_request:
+  push:
+    paths-ignore:
+      - "*.md"
+    branches:
+      - main
+
+jobs:
+  stylua:
+    name: StyLua
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: JohnnyMorganz/stylua-action@v4
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          version: latest
+          args: --check --config-path=stylua.toml .

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/workflows/neovim.yml

@@ -0,0 +1,55 @@
+---
+name: Neovim
+on:
+  pull_request:
+  push:
+    paths-ignore:
+      - "*.md"
+    branches:
+      - main
+
+jobs:
+  ubuntu:
+    name: Ubuntu
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install Neovim
+        uses: MunifTanjim/setup-neovim-action@v1
+        with:
+          tag: nightly
+      - name: Run neovim
+        run: |
+          nvim --version
+          nvim --headless -u tests/init.lua +q
+  macos:
+    name: Macos
+    runs-on: macos-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install Neovim
+        run: |
+          wget -q https://github.com/neovim/neovim/releases/download/nightly/nvim-macos-x86_64.tar.gz
+          xattr -c ./nvim-macos-x86_64.tar.gz
+          tar xzvf nvim-macos-x86_64.tar.gz &> /dev/null
+          ln -s $(pwd)/nvim-macos-x86_64/bin/nvim /usr/local/bin/nvim
+      - name: Run neovim
+        run: |
+          nvim --version
+          nvim --headless -u tests/init.lua +q
+  windows:
+    name: Windows
+    runs-on: windows-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install Neovim
+        run: |
+          C:\msys64\usr\bin\wget.exe -q https://github.com/neovim/neovim/releases/download/nightly/nvim-win64.zip
+          7z x nvim-win64.zip
+          Add-Content $env:GITHUB_PATH ".\nvim-win64\bin\"
+      - name: Run neovim
+        run: |
+          nvim --version
+          nvim --headless -u tests/init.lua +q

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/workflows/palette.yml

@@ -0,0 +1,30 @@
+name: Palette
+
+on:
+  push:
+  workflow_dispatch:
+  schedule:
+    - cron: '0 0 * * *' # Run every day at midnight UTC
+
+jobs:
+  createPullRequest:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Make changes to pull request
+        run: python3 ./.github/scripts/update-palette.py
+
+      - name: Create Pull Request
+        id: cpr
+        uses: peter-evans/create-pull-request@v6
+        with:
+          commit-message: 'feat: auto-sync upstream palettes'
+          committer: GitHub <noreply@github.com>
+          author: ${{ github.actor }} <${{ github.actor }}@users.noreply.github.com>
+          signoff: false
+          branch: new-palettes
+          delete-branch: true
+          title: 'feat: auto-sync upstream palettes'
+          body: |
+            Auto-update `lua/catppuccin/palettes/` based on https://github.com/catppuccin/palette/blob/main/palette.json

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/workflows/pandocvim.yml

@@ -0,0 +1,26 @@
+name: panvimdoc
+
+on:
+  push:
+    paths:
+      - '**.md'
+
+jobs:
+  docs:
+    runs-on: ubuntu-latest
+    name: pandoc to vimdoc
+    steps:
+      - uses: actions/checkout@v4
+      - name: panvimdoc
+        uses: kdheepak/panvimdoc@main
+        with:
+          vimdoc: catppuccin
+          description: "Soothing pastel theme for NeoVim"
+          pandoc: "README.md"
+          toc: true
+          version: "nvim >= 0.8.0"
+          treesitter: true
+      - uses: stefanzweifel/git-auto-commit-action@v5
+        with:
+          commit_message: "docs: auto generate vimdoc"
+          branch: ${{ github.head_ref }}

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/workflows/release.yml

@@ -0,0 +1,29 @@
+name: release
+
+on:
+  push:
+  pull_request:
+  workflow_dispatch:
+
+jobs:
+  release:
+    name: release
+    if: ${{ github.ref == 'refs/heads/main' }}
+    runs-on: ubuntu-latest
+    steps:
+      - uses: google-github-actions/release-please-action@v3
+        id: release
+        with:
+          release-type: simple
+          package-name: catppuccin
+      - uses: actions/checkout@v4
+      - name: tag stable versions
+        if: ${{ steps.release.outputs.release_created }}
+        run: |
+          git config user.name github-actions[bot]
+          git config user.email github-actions[bot]@users.noreply.github.com
+          git remote add gh-token "https://${{ secrets.GITHUB_TOKEN }}@github.com/google-github-actions/release-please-action.git"
+          git tag -d stable || true
+          git push origin :stable || true
+          git tag -a stable -m "Last Stable Release"
+          git push origin stable

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/workflows/tests.yml

@@ -0,0 +1,42 @@
+---
+name: Tests
+on:
+  pull_request:
+  push:
+    paths-ignore:
+      - "*.md"
+    branches:
+      - main
+  workflow_dispatch:
+  schedule:
+    - cron: '0 0 * * *' # Run every day at midnight UTC
+
+jobs:
+  ubuntu:
+    name: Plenary
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          path: nvim
+      - uses: actions/checkout@v4
+        with:
+          ref: user-configs
+          path: user-configs
+      - run: |
+          mv user-configs/tests/* nvim/tests/
+      - name: Install Neovim
+        uses: MunifTanjim/setup-neovim-action@v1
+        with:
+          tag: nightly
+      - name: Fetch dependencies
+        run: |
+          git clone --depth 1 https://github.com/nvim-lua/plenary.nvim ~/.local/share/nvim/site/pack/vendor/start/plenary.nvim
+          ln -s $(pwd) ~/.local/share/nvim/site/pack/vendor/start
+      - name: Run tests
+        working-directory: ./nvim
+        run: |
+          nvim --version
+          [ ! -d tests ] && exit 0
+          nvim --headless -u tests/minimal_init.vim -c "PlenaryBustedDirectory tests/ {minimal_init = 'tests/minimal_init.vim', sequential = true}"

config/neovim/store/lazy-plugins/catppuccin-nvim/.github/workflows/vim.yml

@@ -0,0 +1,58 @@
+---
+name: Vim
+on:
+  pull_request:
+  push:
+    paths-ignore:
+      - "*.md"
+    branches:
+      - main
+
+jobs:
+  ubuntu:
+    name: Ubuntu
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install Vim
+        shell: bash
+        run: |
+          sudo apt-get update
+          sudo apt-get install vim-gtk lua5.4
+          curl -fLo ~/.vim/autoload/plug.vim --create-dirs https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
+      - name: Run vim
+        run: |
+          vim --version
+          vim -u tests/init.vim
+  macos:
+    name: Macos
+    runs-on: macos-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install Vim
+        run: |
+          brew install vim
+          curl -fLo ~/.vim/autoload/plug.vim --create-dirs https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
+      - name: Run vim
+        run: |
+          vim --version
+          vim -u tests/init.vim
+  windows:
+    name: Windows
+    runs-on: windows-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install Vim
+        run: |
+          choco install vim
+          C:\msys64\usr\bin\wget.exe -q https://downloads.sourceforge.net/project/luabinaries/5.4.2/Tools%20Executables/lua-5.4.2_Win64_bin.zip
+          7z x lua-5.4.2_Win64_bin.zip
+          move lua54.dll C:\Windows\System32\
+          iwr -useb https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim |`
+            ni $HOME/vimfiles/autoload/plug.vim -Force
+      - name: Run vim
+        run: |
+          vim --version
+          gvim -u tests/init.vim

config/neovim/store/lazy-plugins/catppuccin-nvim/.gitignore

@@ -0,0 +1,4 @@
+doc/tags
+.vscode/
+.DS_Store
+.repro

config/neovim/store/lazy-plugins/catppuccin-nvim/CHANGELOG.md

@@ -0,0 +1,205 @@
+# Changelog
+
+## [1.9.0](https://github.com/catppuccin/nvim/compare/v1.8.0...v1.9.0) (2024-08-09)
+
+
+### Features
+
+* add fzf-lua integration ([#746](https://github.com/catppuccin/nvim/issues/746)) ([05206bb](https://github.com/catppuccin/nvim/commit/05206bbb6d500a339cd55a9486532c3871a4455e))
+* add lir.nvim and lir-git-status.nvim integration ([#705](https://github.com/catppuccin/nvim/issues/705)) ([d3907de](https://github.com/catppuccin/nvim/commit/d3907deedf74d1d5bd3bb990bff2db2ebc916c56))
+* add markdown.nvim integration ([ba41328](https://github.com/catppuccin/nvim/commit/ba413282677e1027a42d6ff585115d3e1df12b66))
+* add vim-dadbod-ui integration ([#747](https://github.com/catppuccin/nvim/issues/747)) ([4db4c77](https://github.com/catppuccin/nvim/commit/4db4c77cc17d23aa90b393f3e550ce99b9e903d5))
+* **render-markdown:** add highlights for callouts ([03a2f35](https://github.com/catppuccin/nvim/commit/03a2f354456373c199eb7829fd14120cc2099108))
+* **terminal:** highlight `TermCursor` and `TermCursorNC` ([#749](https://github.com/catppuccin/nvim/issues/749)) ([548b2a2](https://github.com/catppuccin/nvim/commit/548b2a25415bb60e05c536b7658aa8ffbfeb3e45))
+
+## [1.8.0](https://github.com/catppuccin/nvim/compare/v1.7.0...v1.8.0) (2024-07-25)
+
+
+### Features
+
+* add `grug-far.nvim` integration ([#735](https://github.com/catppuccin/nvim/issues/735)) ([07f1ee8](https://github.com/catppuccin/nvim/commit/07f1ee861394c163d1f1d3e1926eb309e0c81027))
+* **bufferline:** add `indicator_visible` and `modified_visible` ([#716](https://github.com/catppuccin/nvim/issues/716)) ([cc8e290](https://github.com/catppuccin/nvim/commit/cc8e290d4c0d572171243087f8541e49be2c8764))
+* **csv:** built-in rainbow highlighting ([#720](https://github.com/catppuccin/nvim/issues/720)) ([67565cd](https://github.com/catppuccin/nvim/commit/67565cd353fa543fa30cb738570c2e4c87da3e9c))
+* **diffview:** add diffview integrations ([#700](https://github.com/catppuccin/nvim/issues/700)) ([182f256](https://github.com/catppuccin/nvim/commit/182f25640f85a3da2f1f22b088848d896a50fcce))
+* **feline:** add lazy.nvim updates module, replace deprecated API ([#725](https://github.com/catppuccin/nvim/issues/725)) ([47bd419](https://github.com/catppuccin/nvim/commit/47bd419c0cb776cb0a67ebb525891eca44020b59))
+* **feline:** allow to hide lazy.nvim updates ([#731](https://github.com/catppuccin/nvim/issues/731)) ([7946d1a](https://github.com/catppuccin/nvim/commit/7946d1a195c66fed38b3e34f9fa8e0c5a2da0700))
+* **integration:** add colorful-winsep.nvim ([#701](https://github.com/catppuccin/nvim/issues/701)) ([30481d6](https://github.com/catppuccin/nvim/commit/30481d659b6524e6bcae0756201d737e5bc1f209))
+* **mini:** add new highlight groups ([#721](https://github.com/catppuccin/nvim/issues/721)) ([6827a67](https://github.com/catppuccin/nvim/commit/6827a6763888f73df686f32c0e5ffb5b6b754d7b))
+* **nvim-surround:** add integration ([#733](https://github.com/catppuccin/nvim/issues/733)) ([3f16c6d](https://github.com/catppuccin/nvim/commit/3f16c6d1f25bcb641f7b59f7108b9f4533974c41))
+* support new "Ok" diagnostics ([5215ea5](https://github.com/catppuccin/nvim/commit/5215ea59df6d0a7e27da9a5cd1165e06d1b04cbe))
+* **treesitter-content:** highlight line number ([#709](https://github.com/catppuccin/nvim/issues/709)) ([4edca6b](https://github.com/catppuccin/nvim/commit/4edca6bed2ccc2715317725985c692ef0a992a50))
+
+
+### Bug Fixes
+
+* **dapui:** border match bg color ([#727](https://github.com/catppuccin/nvim/issues/727)) ([4ea0173](https://github.com/catppuccin/nvim/commit/4ea01738dc7b872f0081e7093e46d418d8d4c5a1))
+* **defaults:** Enable mini integration by default ([894efb5](https://github.com/catppuccin/nvim/commit/894efb557728e532aa98b98029d16907a214ec05))
+* **leap:** highlight group for LeapLabel ([2d3419c](https://github.com/catppuccin/nvim/commit/2d3419c2aead379b7d1854d32458f20ffaa58562))
+* **neogit:** link WinSeparator ([#713](https://github.com/catppuccin/nvim/issues/713)) ([afccb3d](https://github.com/catppuccin/nvim/commit/afccb3d2377a3d6f0f65405899c9c23b1fd7cc28))
+* small typo in feline.lua file ([#719](https://github.com/catppuccin/nvim/issues/719)) ([c0bea77](https://github.com/catppuccin/nvim/commit/c0bea773a09e49e123136b099bce9ddc1bf395d2))
+* **treesitter:** highlight paths in `.gitignore` as text ([#736](https://github.com/catppuccin/nvim/issues/736)) ([4374588](https://github.com/catppuccin/nvim/commit/4374588df4e99d403a359cda2ddececcf645d8a9))
+
+## [1.7.0](https://github.com/catppuccin/nvim/compare/v1.6.0...v1.7.0) (2024-04-13)
+
+
+### Features
+
+* add ability to toggle default integrations ([#687](https://github.com/catppuccin/nvim/issues/687)) ([e60e400](https://github.com/catppuccin/nvim/commit/e60e400c411519f29e203185ddda121d4ec8ef57))
+* add support for `outline.nvim` plugin ([#647](https://github.com/catppuccin/nvim/issues/647)) ([048c18f](https://github.com/catppuccin/nvim/commit/048c18fc531703815f5e10765ea46ce9b2c75ae4))
+* **defaults:** enable neotree ([c536623](https://github.com/catppuccin/nvim/commit/c536623eac60f8443c93ae4ca0e03b51574b5f50))
+* **defaults:** enable treesitter context ([dc392c0](https://github.com/catppuccin/nvim/commit/dc392c067739326c3cff380a8c52b0f31319e6dd)), closes [#683](https://github.com/catppuccin/nvim/issues/683)
+* **feline:** fix feline integration ([#685](https://github.com/catppuccin/nvim/issues/685)) ([07679af](https://github.com/catppuccin/nvim/commit/07679af1af4f446655682ee2557b5840ac551504))
+* **feline:** improve feline lsp display ([#688](https://github.com/catppuccin/nvim/issues/688)) ([f66654d](https://github.com/catppuccin/nvim/commit/f66654d5d5190865333e8e46474c1593302c558e))
+* **integration:** add reactive.nvim integration ([#654](https://github.com/catppuccin/nvim/issues/654)) ([151e478](https://github.com/catppuccin/nvim/commit/151e478edf8108cfd451a3cbd44d0a20503e7b42))
+* **lsp:** add highlight for `LspCodeLensSeparator` ([#693](https://github.com/catppuccin/nvim/issues/693)) ([02bdd74](https://github.com/catppuccin/nvim/commit/02bdd749931a5d739063562e57531c118e081882))
+* set `[@comment](https://github.com/comment).warning` that does not affect readability in gitcommit ([#675](https://github.com/catppuccin/nvim/issues/675)) ([045e349](https://github.com/catppuccin/nvim/commit/045e3499d9ec8d84635fb08877ae44fd33f6a38d))
+* **treesitter:** add styles.miscs to disable hardcoded italics ([#659](https://github.com/catppuccin/nvim/issues/659)) ([c0de3b4](https://github.com/catppuccin/nvim/commit/c0de3b46811fe1ce3912e2245a9dfbea6b41c300))
+* **treesitter:** follow upstream captures ([#630](https://github.com/catppuccin/nvim/issues/630)) ([f288876](https://github.com/catppuccin/nvim/commit/f288876c6d05d3bb91b0e72b8031fe9e26ef05b8))
+* **treesitter:** follow upstream captures ([#694](https://github.com/catppuccin/nvim/issues/694)) ([08c6417](https://github.com/catppuccin/nvim/commit/08c6417bdc3b29e5f8c53e2cfe4067f288d49a54))
+* use a more distinguishable color for todos ([#645](https://github.com/catppuccin/nvim/issues/645)) ([657cc4f](https://github.com/catppuccin/nvim/commit/657cc4f35cf193cadac7e5471eb802c97e7a1b59))
+
+
+### Bug Fixes
+
+* **compile:** string.dump isn't deterministic ([836de8b](https://github.com/catppuccin/nvim/commit/836de8bc1898250b69332e66cbe993058870f849)), closes [#664](https://github.com/catppuccin/nvim/issues/664)
+* **dropbar:** correct keyword highlight link ([#652](https://github.com/catppuccin/nvim/issues/652)) ([afab7ec](https://github.com/catppuccin/nvim/commit/afab7ec2a79c7127627dede79c0018b6e45663d0))
+* ensure consistency between JSX and HTML markup ([#660](https://github.com/catppuccin/nvim/issues/660)) ([9703f22](https://github.com/catppuccin/nvim/commit/9703f227bfab20d04bcee62d2f08f1795723b4ae))
+* **flavour:** g:catppuccin_flavour backwards compatibility ([fc98570](https://github.com/catppuccin/nvim/commit/fc98570d85ae772e56dc42cf8d7d6a497a909bdb))
+* **flavour:** respect terminal's background ([#696](https://github.com/catppuccin/nvim/issues/696)) ([d5760c5](https://github.com/catppuccin/nvim/commit/d5760c53ae3b48f0f539298ec4165adc5c0afb19))
+* **illuminate:** update type ([#690](https://github.com/catppuccin/nvim/issues/690)) ([30930f9](https://github.com/catppuccin/nvim/commit/30930f9656cffd068bcf52ced70cdfffd1e83a44))
+* **integrations:** respect default options ([c2e6f8e](https://github.com/catppuccin/nvim/commit/c2e6f8e7eb8d0ebf55700c89bdf842809aeecf09))
+* **neotree:** add `NeoTreeModified` ([#642](https://github.com/catppuccin/nvim/issues/642)) ([6853cc8](https://github.com/catppuccin/nvim/commit/6853cc8e6efc76e85e10ec153d05fc2520653508))
+* **neotree:** blend sidebar with win separator ([56fb982](https://github.com/catppuccin/nvim/commit/56fb98218d22d5c326387bf9e4076227e7372e6b)), closes [#670](https://github.com/catppuccin/nvim/issues/670)
+* repair treesitter underlined text (`Underline` -> `Underlined`) ([#663](https://github.com/catppuccin/nvim/issues/663)) ([42b687c](https://github.com/catppuccin/nvim/commit/42b687c42a35633366ed45e562bf921fb914048b))
+* respect background variable on startup ([6b7a4df](https://github.com/catppuccin/nvim/commit/6b7a4dfdf241c8be0af6ec691b302e85cce03cab))
+* **semantic_tokens:** namespace -> module ([196f301](https://github.com/catppuccin/nvim/commit/196f301de06090c40d7f98297675ac38ae7d6675))
+* **treesitter:** some captures missing leading `@` ([#650](https://github.com/catppuccin/nvim/issues/650)) ([bc1f215](https://github.com/catppuccin/nvim/commit/bc1f2151f23227ba02ac203c2c59ad693352a741))
+* use external index for lsp counting ([c3572a9](https://github.com/catppuccin/nvim/commit/c3572a968a79b64bd0ef16f2c3e93014f112e66d))
+* wrong color shown when using color_overrides ([#658](https://github.com/catppuccin/nvim/issues/658)) ([b76ada8](https://github.com/catppuccin/nvim/commit/b76ada82bf2019d5e343018b4104cc9266900c16)), closes [#657](https://github.com/catppuccin/nvim/issues/657)
+
+## [1.6.0](https://github.com/catppuccin/nvim/compare/v1.5.0...v1.6.0) (2023-12-28)
+
+
+### Features
+
+* add `WinSeparator` highlight group ([#623](https://github.com/catppuccin/nvim/issues/623)) ([988c0b2](https://github.com/catppuccin/nvim/commit/988c0b2dde4140572ed37c6b8b5d5deac0219f9f))
+* **bufferline:** support `no_underline` option ([#601](https://github.com/catppuccin/nvim/issues/601)) ([f7638a1](https://github.com/catppuccin/nvim/commit/f7638a1a65cbffdd01a9ddac0018a20ec4be29e2))
+* **dashboard:** add highlight groups for `doom` theme ([#593](https://github.com/catppuccin/nvim/issues/593)) ([3bdd5e8](https://github.com/catppuccin/nvim/commit/3bdd5e8296971f8c7ba5e499dac8247c3d621508))
+* **integrations:** enable dap & dap_ui by default ([64dc309](https://github.com/catppuccin/nvim/commit/64dc309bc157779691be38bbfc5123584e0a4a85))
+* **lualine:** darken lualine `b` section for better readability ([#606](https://github.com/catppuccin/nvim/issues/606)) ([32ee05d](https://github.com/catppuccin/nvim/commit/32ee05d014a4611555c7f56a73283efb4718d9c5))
+* **mini.indentscope:** add scope color ([#592](https://github.com/catppuccin/nvim/issues/592)) ([795f639](https://github.com/catppuccin/nvim/commit/795f639ac50d6b8400c1d5868fca54844d579f37))
+* **neogit:** support new highlight groups ([#610](https://github.com/catppuccin/nvim/issues/610)) ([f90c7c0](https://github.com/catppuccin/nvim/commit/f90c7c0c467722dc7acacbae3c3904720e09efb6))
+* **notify:** add `NotifyBackground` hl group ([#637](https://github.com/catppuccin/nvim/issues/637)) ([c7cf3af](https://github.com/catppuccin/nvim/commit/c7cf3afe2eb6d9058eec4abb3ace2c1da006478a))
+
+
+### Bug Fixes
+
+* **airline:** missing refresh function ([dcef0a0](https://github.com/catppuccin/nvim/commit/dcef0a062de380885193fb0f919217d58b979753)), closes [#594](https://github.com/catppuccin/nvim/issues/594)
+* **dashboard:** `orange` -> `peach` ([54002a1](https://github.com/catppuccin/nvim/commit/54002a1adfd543f54352b3ec79d4e62c4163e9ee))
+* **flash:** link `FlashPrompt` to `NormalFloat` ([#605](https://github.com/catppuccin/nvim/issues/605)) ([40dc9f0](https://github.com/catppuccin/nvim/commit/40dc9f0621c55bd40da4ad0731fac44d15bb393a))
+* **lualine:** match lualine mode colors for insert and terminal ([#597](https://github.com/catppuccin/nvim/issues/597)) ([ea52fe8](https://github.com/catppuccin/nvim/commit/ea52fe8a0b1e4a820df0d0cf9a6a5a0e18c3eaa0))
+* **neogit:** remove `NeogitCursorLine` from integration ([#613](https://github.com/catppuccin/nvim/issues/613)) ([5e4be43](https://github.com/catppuccin/nvim/commit/5e4be43e1a6acb044d5c55cd10f22461c40656ed))
+* **neogit:** remove diff context highlight fg ([1b40f07](https://github.com/catppuccin/nvim/commit/1b40f072305be71b73c730ff5c7d881e638fd040)), closes [#627](https://github.com/catppuccin/nvim/issues/627)
+* **neogit:** tweak diff context highlighting ([#614](https://github.com/catppuccin/nvim/issues/614)) ([cc717ac](https://github.com/catppuccin/nvim/commit/cc717acba29259d578548973c41448b092453c52))
+* **neotree:** change color of untracked files ([#608](https://github.com/catppuccin/nvim/issues/608)) ([d7521f6](https://github.com/catppuccin/nvim/commit/d7521f6050b94cb0e23067f63829d86886f870fe))
+* **neotree:** make popup titlebar text visible ([#618](https://github.com/catppuccin/nvim/issues/618)) ([919d1f7](https://github.com/catppuccin/nvim/commit/919d1f786338ebeced798afbf28cd085cd54542a))
+* **noice:** respect transparency ([#632](https://github.com/catppuccin/nvim/issues/632)) ([4fbab1f](https://github.com/catppuccin/nvim/commit/4fbab1f01488718c3d54034a473d0346346b90e3))
+* **selene:** allow mixed tables ([#611](https://github.com/catppuccin/nvim/issues/611)) ([9f3c13b](https://github.com/catppuccin/nvim/commit/9f3c13bbcf16fcaec3a429c03743a13e5923f3e3))
+* sync focused and unfocused winbars ([#628](https://github.com/catppuccin/nvim/issues/628)) ([079500a](https://github.com/catppuccin/nvim/commit/079500a625f3ae5aa6efb758f1a17fe4c7a57e52))
+* **vim:** resolve deprecation of nested [[ ([7a4bcda](https://github.com/catppuccin/nvim/commit/7a4bcdadafc59a5bedbd866c643fa486d8cca4a1))
+
+## [1.5.0](https://github.com/catppuccin/nvim/compare/v1.4.0...v1.5.0) (2023-09-29)
+
+
+### Features
+
+* add kitty detection ([d3da439](https://github.com/catppuccin/nvim/commit/d3da43907d1896ba3e68a62f18820d1d12574317))
+* add ufo integration ([1f53686](https://github.com/catppuccin/nvim/commit/1f536869b1a2ca1710fc892db84d7e8bbc6ad8d9))
+* add workaround for kitty transparent issue ([#579](https://github.com/catppuccin/nvim/issues/579)) ([f36fa5c](https://github.com/catppuccin/nvim/commit/f36fa5cdce162450df88298a16631eeed16b68a3))
+* **compile:** use indexed cmd ([85e9360](https://github.com/catppuccin/nvim/commit/85e93601e0f0b48aa2c6bbfae4d0e9d7a1898280))
+* **illuminate:** enabled by default and optional lsp option ([5b44baa](https://github.com/catppuccin/nvim/commit/5b44baa4aff0ff45c042620ee960d283a79807a1)), closes [#571](https://github.com/catppuccin/nvim/issues/571)
+* **indent-blankline:** update to v3, add scope color ([#585](https://github.com/catppuccin/nvim/issues/585)) ([f04336b](https://github.com/catppuccin/nvim/commit/f04336ba4a2400ee2c5250068b39541652c0962f))
+* **integrations:** add NormalNvim ([0e3c128](https://github.com/catppuccin/nvim/commit/0e3c128eea8a7de692778d52b8429817df5c9040)), closes [#580](https://github.com/catppuccin/nvim/issues/580)
+* **integrations:** add notifier.nvim ([d029098](https://github.com/catppuccin/nvim/commit/d029098e124f6201a07298c0c1c499ed8d5aef76)), closes [#574](https://github.com/catppuccin/nvim/issues/574)
+* **lib:** soft deprecate highlighter ([8202348](https://github.com/catppuccin/nvim/commit/82023485fec1703d6f700a4b2a92fd431d4882f4))
+* **syntax:** respect style guide part 3 ([#576](https://github.com/catppuccin/nvim/issues/576)) ([81096ca](https://github.com/catppuccin/nvim/commit/81096cabe67f360acb06d64c0f7db8dd840afeba))
+
+
+### Bug Fixes
+
+* **coc:** improve inlay hints ([#582](https://github.com/catppuccin/nvim/issues/582)) ([3d9a5ed](https://github.com/catppuccin/nvim/commit/3d9a5ed556e289bce6c1fb0af89ec838360641b2))
+* **editor:** invisible fold with transparent ([1c15c5e](https://github.com/catppuccin/nvim/commit/1c15c5e51a998c9198d63c6d2b75e9d1e4a84541)), closes [#577](https://github.com/catppuccin/nvim/issues/577)
+* **template:** broken tmux italic gist link ([128e0d2](https://github.com/catppuccin/nvim/commit/128e0d27946491da979e2e04f5a4acf330ccdefd))
+* **treesitter:** invalid string in type builtin ([135f9b0](https://github.com/catppuccin/nvim/commit/135f9b01386fa18da6d75c16ceb83e1aa3669430))
+* **ufo:** use folded ellipsis ([846388d](https://github.com/catppuccin/nvim/commit/846388d137590e653390ce2f84fea5351a7516ac))
+* **vim:** add vim.env index ([1786287](https://github.com/catppuccin/nvim/commit/17862877792db104d48c3260aec0ace92d55f863))
+
+
+### Performance Improvements
+
+* **compile:** reduce else statement ([a937d54](https://github.com/catppuccin/nvim/commit/a937d546f4783a1ff67f84043d2d7871ad4ecd83))
+
+## [1.4.0](https://github.com/catppuccin/nvim/compare/v1.3.0...v1.4.0) (2023-08-21)
+
+
+### Features
+
+* add ability to enable/disable all integrations by default ([#552](https://github.com/catppuccin/nvim/issues/552)) ([737f60a](https://github.com/catppuccin/nvim/commit/737f60a3a25c79d9bb9574092f6c6c958a3d747a))
+* add flash.nvim integration ([#550](https://github.com/catppuccin/nvim/issues/550)) ([381eddd](https://github.com/catppuccin/nvim/commit/381edddc4ad12126cfa7276818bca07c3d5606ed))
+* enable neogit by default ([91f9f6f](https://github.com/catppuccin/nvim/commit/91f9f6fb413caff2bd06e326ec174deee1c1b7a9)), closes [#568](https://github.com/catppuccin/nvim/issues/568)
+* **flash:** enable by default ([#551](https://github.com/catppuccin/nvim/issues/551)) ([a84ee18](https://github.com/catppuccin/nvim/commit/a84ee1848bfac4601771805396552bdbaa0a0e91))
+* **gitsigns:** Support GitSignsCurrentLineBlame highlights ([#567](https://github.com/catppuccin/nvim/issues/567)) ([3fdd394](https://github.com/catppuccin/nvim/commit/3fdd3942567503d23b65ccc21e7d7757334defd5))
+* **lspsaga:** support v0.3 ([#543](https://github.com/catppuccin/nvim/issues/543)) ([3ffd2f5](https://github.com/catppuccin/nvim/commit/3ffd2f511f3dc6c01258923d7170ccaf1445634b))
+* **lspsaga:** upstream new hl groups ([#544](https://github.com/catppuccin/nvim/issues/544)) ([e0dd3f9](https://github.com/catppuccin/nvim/commit/e0dd3f9bb1513c98ab4ef9404ea26e18babf858a))
+* **neogit:** update highlights ([#545](https://github.com/catppuccin/nvim/issues/545)) ([#549](https://github.com/catppuccin/nvim/issues/549)) ([371430f](https://github.com/catppuccin/nvim/commit/371430f32f2637d2dd5796399b3982d4cada61d8))
+* **telescope:** make nvchad style great again ([#538](https://github.com/catppuccin/nvim/issues/538)) ([51961da](https://github.com/catppuccin/nvim/commit/51961da41e8189ca6f9ed73f37dfa83087b4e65c))
+* **treesitter-context:** add color for normal background ([#564](https://github.com/catppuccin/nvim/issues/564)) ([b1caff9](https://github.com/catppuccin/nvim/commit/b1caff988fb395c0aae585cecff58b1ffa0a21c6))
+
+
+### Bug Fixes
+
+* don't highlight fg of `PmenuSel` ([#554](https://github.com/catppuccin/nvim/issues/554)) ([6425df1](https://github.com/catppuccin/nvim/commit/6425df128d46f2db2cccf9aa7a66ca2823c1d153))
+* highlight NonText characters ([#547](https://github.com/catppuccin/nvim/issues/547)) ([bfe91df](https://github.com/catppuccin/nvim/commit/bfe91dfb3a19ffd4445e43611fcde68acbb3fed4))
+* **integration_default:** hotfix for [#559](https://github.com/catppuccin/nvim/issues/559) ([4913a8b](https://github.com/catppuccin/nvim/commit/4913a8b47554a89a71ed44da39fc1f6e5c2841c3))
+* **integration_default:** override `enabled` key only if integration has one ([#559](https://github.com/catppuccin/nvim/issues/559)) ([9709f82](https://github.com/catppuccin/nvim/commit/9709f8251a40e874238d6f9436cf4fba654b60e1))
+* **noice:** set background blend to 0 for mini popups ([#556](https://github.com/catppuccin/nvim/issues/556)) ([2d50a4e](https://github.com/catppuccin/nvim/commit/2d50a4e3aecffea4144801bb3c0a3cf7b88fdd6b))
+* **nvim-window-picker:** missing table keys ([#569](https://github.com/catppuccin/nvim/issues/569)) ([b9e4dae](https://github.com/catppuccin/nvim/commit/b9e4dae160bf9bc28d4ceb6d29a7e0134b107724))
+* **options:** disable deprecated ts_rainbow and ts_rainbow2 by default ([096385d](https://github.com/catppuccin/nvim/commit/096385dd024ecd1332659916fd7f09d7d18d7374))
+* **telescope:** keep consistency between the two styles ([#540](https://github.com/catppuccin/nvim/issues/540)) ([dfbc8e2](https://github.com/catppuccin/nvim/commit/dfbc8e2b478a65104d34556698067f2d40f1c227))
+* **telescope:** respect transparency ([#542](https://github.com/catppuccin/nvim/issues/542)) ([f36af06](https://github.com/catppuccin/nvim/commit/f36af062e3242f333b12fe9b730053fdda36e000))
+* **treesitter:** avoid possible nil ([17ae783](https://github.com/catppuccin/nvim/commit/17ae783b88bb7ae73dc004370473138d9d43ee46))
+* **types:** make all options besides nested `enabled` optional ([#565](https://github.com/catppuccin/nvim/issues/565)) ([490078b](https://github.com/catppuccin/nvim/commit/490078b1593c6609e6a50ad5001e7902ea601824))
+
+## [1.3.0](https://github.com/catppuccin/nvim/compare/v1.2.0...v1.3.0) (2023-07-10)
+
+
+### Features
+
+* auto-sync upstream palettes ([#507](https://github.com/catppuccin/nvim/issues/507)) ([8426d3b](https://github.com/catppuccin/nvim/commit/8426d3bfd55f4dc68ae451a82927d2ff88e47e95))
+* **debug:** add auto compile on save ([c9cc5a9](https://github.com/catppuccin/nvim/commit/c9cc5a997f1dae3f35b4bdd62f35958fee363ab4))
+* **dropbar:** add new highlight groups ([4f22a1e](https://github.com/catppuccin/nvim/commit/4f22a1e78460ae06e78a1085a8e0e6cc8027aef2)), closes [#503](https://github.com/catppuccin/nvim/issues/503)
+* **integration:** add dropbar.nvim ([#499](https://github.com/catppuccin/nvim/issues/499)) ([e86aeb8](https://github.com/catppuccin/nvim/commit/e86aeb8ca0f03e97192074fba9dc6c836f953a83))
+* **integrations:** accept both boolean and table config ([#534](https://github.com/catppuccin/nvim/issues/534)) ([f0b947a](https://github.com/catppuccin/nvim/commit/f0b947ab8cfdb9ca7ba6230b30bbc1ed48dd30a1))
+* **integrations:** add rainbow_delimiters.nvim support ([#530](https://github.com/catppuccin/nvim/issues/530)) ([cc8d3ab](https://github.com/catppuccin/nvim/commit/cc8d3abc944d78cb6bf2a4cc88871ab383c4da62))
+* **markdown:** add rainbow headlines ([#493](https://github.com/catppuccin/nvim/issues/493)) ([cc517bd](https://github.com/catppuccin/nvim/commit/cc517bdcb66a0f8dee90bab10ccdd651fa967bbe))
+* **native_lsp:** add ability to disable background for inlay hints ([#518](https://github.com/catppuccin/nvim/issues/518)) ([b032ced](https://github.com/catppuccin/nvim/commit/b032cedb90c42a7bfbfbe2f91479505330f4a396))
+* **native_lsp:** support inlay hints ([#516](https://github.com/catppuccin/nvim/issues/516)) ([d32b0bb](https://github.com/catppuccin/nvim/commit/d32b0bb5b1033920de5026e326869838aba856ee))
+* **navic:** change text color ([278bfeb](https://github.com/catppuccin/nvim/commit/278bfeb61bd627dc2a8885180a0441a1ebe65a41))
+* **semantic_tokens:** add some lsp semantic tokens ([#512](https://github.com/catppuccin/nvim/issues/512)) ([506a4aa](https://github.com/catppuccin/nvim/commit/506a4aa13443e0104ea49b99947cc09488d0791d))
+* **telescope:** telescope flat style support ([#521](https://github.com/catppuccin/nvim/issues/521)) ([fc73faa](https://github.com/catppuccin/nvim/commit/fc73faa37bda393e3c4f846fb3e810a6ac8aae16))
+* **types:** add type annotations ([#495](https://github.com/catppuccin/nvim/issues/495)) ([1d3eda1](https://github.com/catppuccin/nvim/commit/1d3eda15703ba70f57e94e6451db55914ff7017f))
+* **workflows:** auto-sync upstream palettes ([e9fbeec](https://github.com/catppuccin/nvim/commit/e9fbeec106562475e82bae79304b6a421eee73f3))
+
+
+### Bug Fixes
+
+* calling palette before setup ([841d8ab](https://github.com/catppuccin/nvim/commit/841d8abf3be39de833d95a592a1fbbb1b9851296))
+* **feline:** disable lsp status on nightly ([#510](https://github.com/catppuccin/nvim/issues/510)) ([9aaf5b4](https://github.com/catppuccin/nvim/commit/9aaf5b4ce5cd256695d8bbddb65869d19919abde))
+* **feline:** use new `vim.lsp.status()` method ([#509](https://github.com/catppuccin/nvim/issues/509)) ([57ee09d](https://github.com/catppuccin/nvim/commit/57ee09dd532bd442b53d65c2b2f35550960981ed))
+* **lsp:** do not link `LspInlayHint` to `Comment` directly ([#517](https://github.com/catppuccin/nvim/issues/517)) ([5dc566c](https://github.com/catppuccin/nvim/commit/5dc566c4206f383657d67500253559d3be82c421))
+* **mapper:** remove unnecessary globals ([#529](https://github.com/catppuccin/nvim/issues/529)) ([c75562c](https://github.com/catppuccin/nvim/commit/c75562cbc954136f279ced91661251543b6f2a20))
+* **native_lsp:** boolean logic ([#526](https://github.com/catppuccin/nvim/issues/526)) ([8d02781](https://github.com/catppuccin/nvim/commit/8d02781a638123394f9bc160aad47a9560a113f9))
+* **tests:** shadowing variable ([15043d3](https://github.com/catppuccin/nvim/commit/15043d363729f1ef20e615c41bbd8b7e92c1453e))
+* **treesitter_context:** underline content if `transparent_background` is true ([#519](https://github.com/catppuccin/nvim/issues/519)) ([6ecc158](https://github.com/catppuccin/nvim/commit/6ecc158dbf365d2cd290b58993296c42b3111965))
+* **which-key:** wrong separator highlight group ([d438c01](https://github.com/catppuccin/nvim/commit/d438c0141609338140b18363a9a1e8eb8bb17130))
+* **workflows:** stylua format ([2df7036](https://github.com/catppuccin/nvim/commit/2df7036c5c303c9184869936e40ca18935e4afcb))

config/neovim/store/lazy-plugins/catppuccin-nvim/LICENSE.md

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2021 Catppuccin
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

config/neovim/store/lazy-plugins/catppuccin-nvim/after/queries/css/highlights.scm

@@ -0,0 +1,16 @@
+;; extends
+[
+(class_name)
+] @property.class
+
+[
+ (id_name)
+ ] @property.id
+
+[
+ (declaration
+	 (plain_value) @string.plain)
+ ]
+[
+ (tag_name)
+ ] @type.tag

config/neovim/store/lazy-plugins/catppuccin-nvim/after/queries/javascript/highlights.scm

@@ -0,0 +1,4 @@
+;; extends
+[
+"export"
+] @keyword.export

config/neovim/store/lazy-plugins/catppuccin-nvim/after/queries/typescript/highlights.scm

@@ -0,0 +1,4 @@
+;; extends
+[
+"export"
+] @keyword.export

config/neovim/store/lazy-plugins/catppuccin-nvim/autoload/airline/themes/catppuccin.vim

@@ -0,0 +1,72 @@
+let g:airline#themes#catppuccin#palette = {}
+
+function! airline#themes#catppuccin#refresh()
+	let s:c = has("nvim") == 1 ? luaeval('require("catppuccin.palettes").get_palette()') : luaeval('vim.dict(require("catppuccin.palettes").get_palette())')
+
+	" Normal mode
+	" (Dark)
+	let s:N1 = [ s:c.mantle, s:c.blue, 59, 149 ] " guifg guibg ctermfg ctermbg
+	let s:N2 = [ s:c.blue, s:c.surface0, 149, 59	] " guifg guibg ctermfg ctermbg
+	let s:N3 = [ s:c.text, s:c.mantle, 145, 16	] " guifg guibg ctermfg ctermbg
+
+	" Insert mode
+	let s:I1 = [ s:c.mantle, s:c.teal, 59, 74 ] " guifg guibg ctermfg ctermbg
+	let s:I2 = [ s:c.teal, s:c.surface0, 74, 59 ] " guifg guibg ctermfg ctermbg
+	let s:I3 = [ s:c.text, s:c.mantle, 145, 16 ] " guifg guibg ctermfg ctermbg
+
+	" Visual mode
+	let s:V1 = [ s:c.mantle, s:c.mauve, 59, 209 ] " guifg guibg ctermfg ctermbg
+	let s:V2 = [ s:c.mauve, s:c.surface0, 209, 59 ] " guifg guibg ctermfg ctermbg
+	let s:V3 = [ s:c.text, s:c.mantle, 145, 16	] " guifg guibg ctermfg ctermbg
+
+	" Replace mode
+	let s:R1 = [ s:c.mantle, s:c.red, 59, 203 ] " guifg guibg ctermfg ctermbg
+	let s:R2 = [ s:c.red, s:c.surface0, 203, 59 ] " guifg guibg ctermfg ctermbg
+
+	" Command mode
+	let s:C1 = [ s:c.base, s:c.peach, 59, 166 ] " guifg guibg ctermfg ctermbg
+	let s:C2 = [ s:c.peach, s:c.surface0, 166, 59 ] " guifg guibg ctermfg ctermbg
+
+	" Warning section
+	let s:WR = [s:c.mantle, s:c.peach, 232, 166 ]
+
+	" Error section
+	let s:ER = [s:c.mantle, s:c.red, 232, 166 ]
+
+
+	let g:airline#themes#catppuccin#palette.normal = airline#themes#generate_color_map(s:N1, s:N2, s:N3)
+
+	let g:airline#themes#catppuccin#palette.insert = airline#themes#generate_color_map(s:I1, s:I2, s:I3)
+
+	let g:airline#themes#catppuccin#palette.visual = airline#themes#generate_color_map(s:V1, s:V2, s:V3)
+
+	let s:IA = [ s:N1[1], s:N3[1], s:N1[3], s:N3[3], '' ]
+	let g:airline#themes#catppuccin#palette.inactive = airline#themes#generate_color_map(s:IA, s:IA, s:IA)
+
+	let g:airline#themes#catppuccin#palette.normal.airline_warning = s:WR
+	let g:airline#themes#catppuccin#palette.insert.airline_warning = s:WR
+	let g:airline#themes#catppuccin#palette.visual.airline_warning = s:WR
+
+	let g:airline#themes#catppuccin#palette.normal.airline_warning_to_airline_error = s:WR
+	let g:airline#themes#catppuccin#palette.insert.airline_warning_to_airline_error = s:WR
+	let g:airline#themes#catppuccin#palette.visual.airline_warning_to_airline_error = s:WR
+
+	let g:airline#themes#catppuccin#palette.normal.airline_error = s:ER
+	let g:airline#themes#catppuccin#palette.insert.airline_error = s:ER
+	let g:airline#themes#catppuccin#palette.visual.airline_error = s:ER
+
+	" Fork replace mode from insert mode
+	let g:airline#themes#catppuccin#palette.replace = copy(g:airline#themes#catppuccin#palette.insert)
+	let g:airline#themes#catppuccin#palette.replace.airline_a = [ s:R1[0], s:R1[1], s:R1[2], s:R1[3], '' ]
+	let g:airline#themes#catppuccin#palette.replace.airline_b = [ s:R2[0], s:R2[1], s:R2[2], s:R2[3], '' ]
+
+	" Terminal mode is same as insert mode
+	let g:airline#themes#catppuccin#palette.terminal = copy(g:airline#themes#catppuccin#palette.insert)
+
+	" Fork command mode from normal mode
+	let g:airline#themes#catppuccin#palette.commandline = copy(g:airline#themes#catppuccin#palette.normal)
+	let g:airline#themes#catppuccin#palette.commandline.airline_a = [ s:C1[0], s:C1[1], s:C1[2], s:C1[3], '' ]
+	let g:airline#themes#catppuccin#palette.commandline.airline_b = [ s:C2[0], s:C2[1], s:C2[2], s:C2[3], '' ]
+endfunction
+
+call airline#themes#catppuccin#refresh()

config/neovim/store/lazy-plugins/catppuccin-nvim/autoload/clap/themes/catppuccin.vim

@@ -0,0 +1,20 @@
+let s:c = has("nvim") == 1 ? luaeval('require("catppuccin.palettes").get_palette()') : luaeval('vim.dict(require("catppuccin.palettes").get_palette())')
+
+let s:p = {}
+
+let s:p.display = { 'guibg': s:c.mantle }
+
+let s:p.input = s:p.display
+let s:p.indicator = { 'guifg': s:c.subtext1, 'guibg': s:c.mantle }
+let s:p.spinner = { 'guifg': s:c.yellow, 'guibg': s:c.mantle, 'gui': "bold" }
+let s:p.search_text = { 'guifg': s:c.text, 'guibg': s:c.mantle, 'gui': "bold" }
+
+let s:p.preview = { 'guibg': s:c.base }
+
+let s:p.selected = { 'guifg': s:c.sapphire, 'gui': "bold,underline" }
+let s:p.current_selection = { 'guibg': s:c.surface0, 'gui': "bold" }
+
+let s:p.selected_sign = { 'guifg': s:c.red }
+let s:p.current_selection_sign = copy(s:p.selected_sign)
+
+let g:clap#themes#catppuccin#palette = s:p

config/neovim/store/lazy-plugins/catppuccin-nvim/autoload/lightline/colorscheme/catppuccin.vim

@@ -0,0 +1,22 @@
+let s:c = has("nvim") == 1 ? luaeval('require("catppuccin.palettes").get_palette()') : luaeval('vim.dict(require("catppuccin.palettes").get_palette())')
+
+let s:p = {'normal': {}, 'inactive': {}, 'insert': {}, 'replace': {}, 'visual': {}, 'tabline': {}}
+let s:p.normal.left = [ [ s:c.mantle, s:c.blue ], [ s:c.blue, s:c.base ] ]
+let s:p.normal.middle = [ [ s:c.blue, s:c.mantle ] ]
+let s:p.normal.right = [ [ s:c.overlay0, s:c.base ], [ s:c.blue, s:c.surface0 ] ]
+let s:p.insert.left = [ [ s:c.mantle, s:c.teal ], [ s:c.blue, s:c.base ] ]
+let s:p.visual.left = [ [ s:c.mantle, s:c.mauve ], [ s:c.blue, s:c.base ] ]
+let s:p.replace.left = [ [ s:c.mantle, s:c.red ], [ s:c.blue, s:c.base ] ]
+
+let s:p.inactive.left =  [ [ s:c.blue, s:c.base ], [ s:c.overlay0, s:c.base ] ]
+let s:p.inactive.middle = [ [ s:c.surface1, s:c.base ] ]
+let s:p.inactive.right = [ [ s:c.surface1, s:c.base ], [ s:c.overlay0, s:c.base ] ]
+
+let s:p.tabline.left = [ [ s:c.overlay0, s:c.base ], [ s:c.overlay0, s:c.base ] ]
+let s:p.tabline.tabsel = [ [ s:c.blue, s:c.surface1 ], [ s:c.overlay0, s:c.base] ]
+let s:p.tabline.middle = [ [ s:c.surface1, s:c.base ] ]
+let s:p.tabline.right = copy(s:p.inactive.right)
+let s:p.normal.error = [ [ s:c.mantle, s:c.red ] ]
+let s:p.normal.warning = [ [ s:c.mantle, s:c.yellow ] ]
+
+let g:lightline#colorscheme#catppuccin#palette = lightline#colorscheme#fill(s:p)

config/neovim/store/lazy-plugins/catppuccin-nvim/colors/catppuccin-frappe.vim

@@ -0,0 +1 @@
+lua require("catppuccin").load "frappe"

config/neovim/store/lazy-plugins/catppuccin-nvim/colors/catppuccin-latte.vim

@@ -0,0 +1 @@
+lua require("catppuccin").load "latte"

config/neovim/store/lazy-plugins/catppuccin-nvim/colors/catppuccin-macchiato.vim

@@ -0,0 +1 @@
+lua require("catppuccin").load "macchiato"

config/neovim/store/lazy-plugins/catppuccin-nvim/colors/catppuccin-mocha.vim

@@ -0,0 +1 @@
+lua require("catppuccin").load "mocha"

config/neovim/store/lazy-plugins/catppuccin-nvim/colors/catppuccin.vim

@@ -0,0 +1 @@
+lua require("catppuccin").load()

config/neovim/store/lazy-plugins/catppuccin-nvim/doc/catppuccin.txt

@@ -0,0 +1,952 @@
+*catppuccin.txt*                              Soothing pastel theme for NeoVim
+
+==============================================================================
+Table of Contents                               *catppuccin-table-of-contents*
+
+1. Features                                              |catppuccin-features|
+2. Installation                                      |catppuccin-installation|
+3. Usage                                                    |catppuccin-usage|
+4. Configuration                                    |catppuccin-configuration|
+5. Customize highlights                      |catppuccin-customize-highlights|
+  - Get catppuccin colors|catppuccin-customize-highlights-get-catppuccin-colors|
+  - Overwriting colors    |catppuccin-customize-highlights-overwriting-colors|
+  - Overwriting highlight groups|catppuccin-customize-highlights-overwriting-highlight-groups|
+6. Integrations                                      |catppuccin-integrations|
+7. Compile                                                |catppuccin-compile|
+8. FAQ                                                        |catppuccin-faq|
+  - Wrong treesitter highlights   |catppuccin-faq-wrong-treesitter-highlights|
+  - Colors doesn’t match preview screenshots|catppuccin-faq-colors-doesn’t-match-preview-screenshots|
+9. Thanks to                                            |catppuccin-thanks-to|
+10. Links                                                   |catppuccin-links|
+
+==============================================================================
+1. Features                                              *catppuccin-features*
+
+- Supports both vim and neovim (Requires neovim <https://github.com/neovim/neovim/> >= 0.8 or vim <https://github.com/vim/vim> >= 9 compiled with lua <https://github.com/lua/lua> >= 5.1)
+- Highly configurable with 4 different flavours and ability to create your own! <https://github.com/catppuccin/nvim/discussions/323>
+- Compile <https://github.com/catppuccin/nvim#Compile> user config for fastest startuptime <https://www.reddit.com/r/neovim/comments/xxfpt3/catppuccinnvim_now_startup_in_1ms/>
+- Integrations with lsp, treesitter and a bunch of plugins <https://github.com/catppuccin/nvim#integrations>
+- Supports for many other applications <https://github.com/catppuccin/catppuccin>
+
+
+==============================================================================
+2. Installation                                      *catppuccin-installation*
+
+lazy.nvim <https://github.com/folke/lazy.nvim>
+
+>lua
+    { "catppuccin/nvim", name = "catppuccin", priority = 1000 }
+<
+
+packer.nvim <https://github.com/wbthomason/packer.nvim>
+
+>lua
+    use { "catppuccin/nvim", as = "catppuccin" }
+<
+
+vim-plug <https://github.com/junegunn/vim-plug>
+
+>vim
+    Plug 'catppuccin/nvim', { 'as': 'catppuccin' }
+<
+
+
+==============================================================================
+3. Usage                                                    *catppuccin-usage*
+
+>vim
+    colorscheme catppuccin " catppuccin-latte, catppuccin-frappe, catppuccin-macchiato, catppuccin-mocha
+<
+
+>lua
+    vim.cmd.colorscheme "catppuccin"
+<
+
+
+==============================================================================
+4. Configuration                                    *catppuccin-configuration*
+
+There is no need to call `setup` if you don’t want to change the default
+options and settings.
+
+>lua
+    require("catppuccin").setup({
+        flavour = "auto", -- latte, frappe, macchiato, mocha
+        background = { -- :h background
+            light = "latte",
+            dark = "mocha",
+        },
+        transparent_background = false, -- disables setting the background color.
+        show_end_of_buffer = false, -- shows the '~' characters after the end of buffers
+        term_colors = false, -- sets terminal colors (e.g. `g:terminal_color_0`)
+        dim_inactive = {
+            enabled = false, -- dims the background color of inactive window
+            shade = "dark",
+            percentage = 0.15, -- percentage of the shade to apply to the inactive window
+        },
+        no_italic = false, -- Force no italic
+        no_bold = false, -- Force no bold
+        no_underline = false, -- Force no underline
+        styles = { -- Handles the styles of general hi groups (see `:h highlight-args`):
+            comments = { "italic" }, -- Change the style of comments
+            conditionals = { "italic" },
+            loops = {},
+            functions = {},
+            keywords = {},
+            strings = {},
+            variables = {},
+            numbers = {},
+            booleans = {},
+            properties = {},
+            types = {},
+            operators = {},
+            -- miscs = {}, -- Uncomment to turn off hard-coded styles
+        },
+        color_overrides = {},
+        custom_highlights = {},
+        default_integrations = true,
+        integrations = {
+            cmp = true,
+            gitsigns = true,
+            nvimtree = true,
+            treesitter = true,
+            notify = false,
+            mini = {
+                enabled = true,
+                indentscope_color = "",
+            },
+            -- For more plugins integrations please scroll down (https://github.com/catppuccin/nvim#integrations)
+        },
+    })
+    
+    -- setup must be called before loading
+    vim.cmd.colorscheme "catppuccin"
+<
+
+
+==============================================================================
+5. Customize highlights                      *catppuccin-customize-highlights*
+
+
+GET CATPPUCCIN COLORS  *catppuccin-customize-highlights-get-catppuccin-colors*
+
+>lua
+    local latte = require("catppuccin.palettes").get_palette "latte"
+    local frappe = require("catppuccin.palettes").get_palette "frappe"
+    local macchiato = require("catppuccin.palettes").get_palette "macchiato"
+    local mocha = require("catppuccin.palettes").get_palette "mocha"
+<
+
+Returns a table where the key is the name of the color and the value is its hex
+value corresponding to each flavour.
+
+
+OVERWRITING COLORS        *catppuccin-customize-highlights-overwriting-colors*
+
+Colors can be overwritten using `color_overrides` in the setting, checkout
+https://github.com/catppuccin/nvim/discussions/323 for inspirations:
+
+>lua
+    require("catppuccin").setup {
+        color_overrides = {
+            all = {
+                text = "#ffffff",
+            },
+            latte = {
+                base = "#ff0000",
+                mantle = "#242424",
+                crust = "#474747",
+            },
+            frappe = {},
+            macchiato = {},
+            mocha = {},
+        }
+    }
+<
+
+
+  [!Note] For more information check out our style-guide
+  <https://github.com/catppuccin/catppuccin/blob/main/docs/style-guide.md>
+
+OVERWRITING HIGHLIGHT GROUPS*catppuccin-customize-highlights-overwriting-highlight-groups*
+
+Global highlight groups can be overwritten in the setting, for example:
+
+>lua
+    require("catppuccin").setup {
+        custom_highlights = function(colors)
+            return {
+                Comment = { fg = colors.flamingo },
+                TabLineSel = { bg = colors.pink },
+                CmpBorder = { fg = colors.surface2 },
+                Pmenu = { bg = colors.none },
+            }
+        end
+    }
+<
+
+Per flavour highlight groups can also be overwritten in the setting, for
+example:
+
+>lua
+    require("catppuccin").setup {
+        highlight_overrides = {
+            all = function(colors)
+                return {
+                    NvimTreeNormal = { fg = colors.none },
+                    CmpBorder = { fg = "#3e4145" },
+                }
+            end,
+            latte = function(latte)
+                return {
+                    Normal = { fg = latte.base },
+                }
+            end,
+            frappe = function(frappe)
+                return {
+                    ["@comment"] = { fg = frappe.surface2, style = { "italic" } },
+                }
+            end,
+            macchiato = function(macchiato)
+                return {
+                    LineNr = { fg = macchiato.overlay1 },
+                }
+            end,
+            mocha = function(mocha)
+                return {
+                    Comment = { fg = mocha.flamingo },
+                }
+            end,
+        },
+    }
+<
+
+
+==============================================================================
+6. Integrations                                      *catppuccin-integrations*
+
+Catppuccin provides theme support for other plugins in the Neovim ecosystem and
+extended Neovim functionality through _integrations_.
+
+To enable/disable an integration you just need to set it to true/false, for
+example:
+
+>lua
+    require("catppuccin").setup({
+        integrations = {
+            cmp = true,
+            gitsigns = true,
+            nvimtree = true,
+            treesitter = true,
+            notify = false,
+            mini = {
+                enabled = true,
+                indentscope_color = "",
+            },
+        }
+    })
+<
+
+Some integrations are enabled by default, you can control this behaviour with
+`default_integrations` option.
+
+>lua
+    require("catppuccin").setup({
+        default_integrations = false,
+    })
+<
+
+Below is a list of supported plugins and their corresponding integration
+module.
+
+
+  [!Important] If you’d like to know which highlight groups are being affected
+  by catppuccin, check out this directory: `lua/catppuccin/groups/integrations/`
+  <https://github.com/catppuccin/nvim/tree/main/lua/catppuccin/groups/integrations>.
+PluginDefaultaerial.nvim>lua
+    aerial = false
+<
+
+alpha-nvim>lua
+    alpha = true
+<
+
+barbar.nvim>lua
+    barbar = false
+<
+
+barbecue.nvim>lua
+    barbecue = {
+        dim_dirname = true, -- directory name is dimmed by default
+        bold_basename = true,
+        dim_context = false,
+        alt_background = false,
+    },
+<
+
+Special ~
+
+Use this to set it up:
+
+>lua
+    require("barbecue").setup {
+      theme = "catppuccin", -- catppuccin-latte, catppuccin-frappe, catppuccin-macchiato, catppuccin-mocha
+    }
+<
+
+beacon.nvim>lua
+    beacon = false
+<
+
+bufferline.nvimSpecial ~
+
+Update your bufferline config to use the Catppuccin components:
+
+
+  [!NOTE] bufferline needs to be loaded after setting up catppuccin or it will
+  highlight incorrectly
+>lua
+    use "akinsho/bufferline.nvim" {
+      after = "catppuccin",
+      config = function()
+        require("bufferline").setup {
+          highlights = require("catppuccin.groups.integrations.bufferline").get()
+        }
+      end
+    }
+<
+
+Configurations are self-explanatory, see |bufferline-highlights| for detailed
+explanations:
+
+>lua
+    local mocha = require("catppuccin.palettes").get_palette "mocha"
+    bufferline.setup {
+        highlights = require("catppuccin.groups.integrations.bufferline").get {
+            styles = { "italic", "bold" },
+            custom = {
+                all = {
+                    fill = { bg = "#000000" },
+                },
+                mocha = {
+                    background = { fg = mocha.text },
+                },
+                latte = {
+                    background = { fg = "#000000" },
+                },
+            },
+        },
+    }
+<
+
+coc.nvim>lua
+    coc_nvim = false
+<
+
+Special ~
+
+Setting `enabled` to `true` enables this integration.
+
+>lua
+    coc_nvim = true,
+<
+
+
+  [!Note] coc.nvim by default link to native lsp highlight groups so config from
+  `native_lsp` will also apply to coc
+In the inners tables you can set the style for the diagnostics, both
+`virtual_text` (what you see on the side) and `underlines` (what points
+directly at the thing (e.g. an error)).
+
+>lua
+    native_lsp = {
+        enabled = true,
+        virtual_text = {
+            errors = { "italic" },
+            hints = { "italic" },
+            warnings = { "italic" },
+            information = { "italic" },
+            ok = { "italic" },
+        },
+        underlines = {
+            errors = { "underline" },
+            hints = { "underline" },
+            warnings = { "underline" },
+            information = { "underline" },
+            ok = { "underline" },
+        },
+        inlay_hints = {
+            background = true,
+        },
+    },
+<
+
+colorful-winsep.nvim>lua
+    colorful_winsep = {
+        enabled = false,
+        color = "red",
+    }
+<
+
+dashboard-nvim>lua
+    dashboard = true
+<
+
+diffview.nvim>lua
+    diffview = false
+<
+
+dropbar.nvim>lua
+    dropbar = {
+        enabled = false,
+        color_mode = false, -- enable color for kind's texts, not just kind's icons
+    },
+<
+
+feline.nvimSpecial ~
+
+Update your Feline config to use the Catppuccin components:
+
+>lua
+    local ctp_feline = require('catppuccin.groups.integrations.feline')
+    
+    ctp_feline.setup()
+    
+    require("feline").setup({
+        components = ctp_feline.get(),
+    })
+<
+
+Notice that calling `setup()` is optional. You may pass a lua table in order to
+change assets, settings and the colors per vim mode.
+
+Here are the defaults:
+
+>lua
+    local clrs = require("catppuccin.palettes").get_palette()
+    local ctp_feline = require('catppuccin.groups.integrations.feline')
+    local U = require "catppuccin.utils.colors"
+    
+    ctp_feline.setup({
+        assets = {
+            left_separator = "",
+            right_separator = "",
+            mode_icon = "",
+            dir = "󰉖",
+            file = "󰈙",
+            lsp = {
+                server = "󰅡",
+                error = "",
+                warning = "",
+                info = "",
+                hint = "",
+            },
+            git = {
+                branch = "",
+                added = "",
+                changed = "",
+                removed = "",
+            },
+        },
+        sett = {
+            text = U.vary_color({ latte = latte.base }, clrs.surface0),
+            bkg = U.vary_color({ latte = latte.crust }, clrs.surface0),
+            diffs = clrs.mauve,
+            extras = clrs.overlay1,
+            curr_file = clrs.maroon,
+            curr_dir = clrs.flamingo,
+            show_modified = false -- show if the file has been modified
+            show_lazy_updates = false -- show the count of updatable plugins from lazy.nvim
+                                      -- need to set checker.enabled = true in lazy.nvim first
+                                      -- the icon is set in ui.icons.plugin in lazy.nvim
+        },
+        mode_colors = {
+            ["n"] = { "NORMAL", clrs.lavender },
+            ["no"] = { "N-PENDING", clrs.lavender },
+            ["i"] = { "INSERT", clrs.green },
+            ["ic"] = { "INSERT", clrs.green },
+            ["t"] = { "TERMINAL", clrs.green },
+            ["v"] = { "VISUAL", clrs.flamingo },
+            ["V"] = { "V-LINE", clrs.flamingo },
+            [""] = { "V-BLOCK", clrs.flamingo },
+            ["R"] = { "REPLACE", clrs.maroon },
+            ["Rv"] = { "V-REPLACE", clrs.maroon },
+            ["s"] = { "SELECT", clrs.maroon },
+            ["S"] = { "S-LINE", clrs.maroon },
+            [""] = { "S-BLOCK", clrs.maroon },
+            ["c"] = { "COMMAND", clrs.peach },
+            ["cv"] = { "COMMAND", clrs.peach },
+            ["ce"] = { "COMMAND", clrs.peach },
+            ["r"] = { "PROMPT", clrs.teal },
+            ["rm"] = { "MORE", clrs.teal },
+            ["r?"] = { "CONFIRM", clrs.mauve },
+            ["!"] = { "SHELL", clrs.green },
+        },
+        view = {
+            lsp = {
+                progress = true, -- if true the status bar will display an lsp progress indicator
+                name = false, -- if true the status bar will display the lsp servers name, otherwise it will display the text "Lsp"
+                exclude_lsp_names = {}, -- lsp server names that should not be displayed when name is set to true
+                separator = "|", -- the separator used when there are multiple lsp servers
+            },
+        }
+    })
+<
+
+
+  [!Warning] Currently feline doesn’t officially support custom themes
+  <https://github.com/feline-nvim/feline.nvim/issues/302>. In order for
+  `:colorscheme catppuccin-<flavour>` to work you could add this autocmd as a
+  workaround:
+>lua
+    vim.api.nvim_create_autocmd("ColorScheme", {
+        pattern = "*",
+        callback = function()
+            package.loaded["feline"] = nil
+            package.loaded["catppuccin.groups.integrations.feline"] = nil
+            require("feline").setup {
+                components = require("catppuccin.groups.integrations.feline").get(),
+            }
+        end,
+    })
+<
+
+fern.vim>lua
+    fern = false
+<
+
+fidget.nvim>lua
+    fidget = false
+<
+
+Special ~
+
+Set `notification.window.winblend` to `0`:
+
+>lua
+    require("fidget").setup {
+        notification = {
+            window = {
+                winblend = 0,
+            },
+        }
+        -- ... the rest of your fidget config
+    }
+<
+
+flash.nvim>lua
+    flash = true
+<
+
+fzf-lua>lua
+    fzf = true
+<
+
+gitsigns.nvim>lua
+    gitsigns = true
+<
+
+grug-far.nvim>lua
+    grug_far = false
+<
+
+harpoon>lua
+    harpoon = false
+<
+
+headlines.nvim>lua
+    headlines = false
+<
+
+hop.nvim>lua
+    hop = false
+<
+
+indent-blankline.nvim>lua
+    indent_blankline = {
+        enabled = true,
+        scope_color = "", -- catppuccin color (eg. `lavender`) Default: text
+        colored_indent_levels = false,
+    },
+<
+
+Special ~
+
+`colored_indent_levels` enables char highlights per indent level. Follow the
+instructions here
+<https://github.com/lukas-reineke/indent-blankline.nvim#multiple-indent-colors>
+to set the latter up.
+
+leap.nvim>lua
+    leap = false
+<
+
+lightline.vimSpecial ~
+
+>vim
+    let g:lightline = {'colorscheme': 'catppuccin'}
+<
+
+lightspeed.nvim>lua
+    lightspeed = false
+<
+
+lir.nvim>lua
+    lir = {
+        enabled = false,
+        git_status = false
+    }
+<
+
+lspsaga.nvim>lua
+    lsp_saga = false
+<
+
+Special ~
+
+For custom Lsp Kind Icon and Color
+
+>lua
+    require("lspsaga").setup {
+        ui = {
+            kind = require("catppuccin.groups.integrations.lsp_saga").custom_kind(),
+        },
+    }
+<
+
+lualine.nvimSpecial ~
+
+>lua
+    require('lualine').setup {
+        options = {
+            theme = "catppuccin"
+            -- ... the rest of your lualine config
+        }
+    }
+<
+
+markdown>lua
+    markdown = true
+<
+
+mason.nvim>lua
+    mason = false
+<
+
+mini.nvim>lua
+    mini = {
+        enabled = true,
+        indentscope_color = "", -- catppuccin color (eg. `lavender`) Default: text
+    },
+<
+
+neo-tree.nvim>lua
+    neotree = false
+<
+
+neogit>lua
+    neogit = true
+<
+
+neotest>lua
+    neotest = false
+<
+
+noice.nvim>lua
+    noice = false
+<
+
+NormalNvim>lua
+    NormalNvim = false
+<
+
+notifier.nvim>lua
+    notifier = false
+<
+
+nvim-cmp>lua
+    cmp = true
+<
+
+nvim-dap>lua
+    dap = true
+<
+
+Special ~
+
+>lua
+    local sign = vim.fn.sign_define
+    
+    sign("DapBreakpoint", { text = "●", texthl = "DapBreakpoint", linehl = "", numhl = ""})
+    sign("DapBreakpointCondition", { text = "●", texthl = "DapBreakpointCondition", linehl = "", numhl = ""})
+    sign("DapLogPoint", { text = "◆", texthl = "DapLogPoint", linehl = "", numhl = ""})
+<
+
+nvim-dap-ui>lua
+    dap_ui = true
+<
+
+nvim-lspconfig>lua
+    native_lsp = {
+        enabled = true,
+        virtual_text = {
+            errors = { "italic" },
+            hints = { "italic" },
+            warnings = { "italic" },
+            information = { "italic" },
+            ok = { "italic" },
+        },
+        underlines = {
+            errors = { "underline" },
+            hints = { "underline" },
+            warnings = { "underline" },
+            information = { "underline" },
+            ok = { "underline" },
+        },
+        inlay_hints = {
+            background = true,
+        },
+    },
+<
+
+Special ~
+
+In the inners tables you can set the style for the diagnostics, both
+`virtual_text` (what you see on the side) and `underlines` (what points
+directly at the thing (e.g. an error)).
+
+navic>lua
+    navic = {
+        enabled = false,
+        custom_bg = "NONE", -- "lualine" will set background to mantle
+    },
+<
+
+Special ~
+
+>lua
+    -- You NEED to enable highlight in nvim-navic setting or it won't work
+    require("nvim-navic").setup {
+        highlight = true
+    }
+<
+
+nvim-notify>lua
+    notify = false
+<
+
+nvim-semantic-tokens>lua
+    semantic_tokens = true
+<
+
+nvim-surround>lua
+    nvim_surround = false
+<
+
+nvim-tree.lua>lua
+    nvimtree = true
+<
+
+nvim-treesitter-context>lua
+    treesitter_context = true
+<
+
+nvim-treesitter>lua
+    treesitter = true
+<
+
+nvim-ts-rainbow2>lua
+    ts_rainbow2 = false
+<
+
+nvim-ts-rainbow>lua
+    ts_rainbow = false
+<
+
+nvim-ufo>lua
+    ufo = true
+<
+
+nvim-window-picker>lua
+    window_picker = false
+<
+
+octo.nvim>lua
+    octo = false
+<
+
+overseer.nvim>lua
+    overseer = false
+<
+
+pounce.nvim>lua
+    pounce = false
+<
+
+rainbow-delimiters.nvim>lua
+    rainbow_delimiters = true
+<
+
+reactive.nvimSpecial ~
+
+There’re 2 available presets (`cursor` and `cursorline`) for every flavour.
+
+Here is how you can use them.
+
+>lua
+    require('reactive').setup {
+      load = { 'catppuccin-mocha-cursor', 'catppuccin-mocha-cursorline' }
+    }
+<
+
+To use another flavour just replace `mocha` with the one you want to use.
+
+render-markdown.nvim>lua
+    render_markdown = true
+<
+
+symbols-outline.nvim
+  [!NOTE] This plugin has been archived by the author, consider using
+  outline.nvim <https://github.com/hedyhli/outline.nvim>
+>lua
+    symbols_outline = false
+<
+
+telekasten.nvim>lua
+    telekasten = false
+<
+
+telescope.nvim>lua
+    telescope = {
+        enabled = true,
+        -- style = "nvchad"
+    }
+<
+
+trouble.nvim>lua
+    lsp_trouble = false
+<
+
+vim-airlineSpecial ~
+
+>vim
+    let g:airline_theme = 'catppuccin'
+<
+
+vim-clapSpecial ~
+
+Use this to set it up:
+
+>vim
+    let g:clap_theme = 'catppuccin'
+<
+
+vim-dadbod-ui>lua
+    dadbod_ui = false
+<
+
+vim-gitgutter>lua
+    gitgutter = false
+<
+
+vim-illuminate>lua
+    illuminate = {
+        enabled = true,
+        lsp = false
+    }
+<
+
+vim-sandwich>lua
+    sandwich = false
+<
+
+vim-sneak>lua
+    vim_sneak = false
+<
+
+vimwiki>lua
+    vimwiki = false
+<
+
+which-key.nvim>lua
+    which_key = false
+<
+
+
+==============================================================================
+7. Compile                                                *catppuccin-compile*
+
+
+  **Important** As of 7/10/2022, catppuccin should be able to automatically
+  recompile when the setup table changed.
+Catppuccin is a highly customizable and configurable colorscheme. This does
+however come at the cost of complexity and execution time. Catppuccin can pre
+compute the results of your configuration and store the results in a compiled
+lua file. We use these precached values to set it’s highlights.
+
+By default catppuccin writes the compiled results into the system’s cache
+directory. You can change the cache dir using:
+
+>lua
+    require("catppuccin").setup({ -- Note: On windows we replace `/` with `\` by default
+        compile_path = vim.fn.stdpath "cache" .. "/catppuccin"
+    })
+<
+
+
+==============================================================================
+8. FAQ                                                        *catppuccin-faq*
+
+
+WRONG TREESITTER HIGHLIGHTS       *catppuccin-faq-wrong-treesitter-highlights*
+
+Please disable `additional_vim_regex_highlighting`
+
+>lua
+    require("nvim-treesitter.configs").setup {
+        highlight = {
+            enable = true,
+            additional_vim_regex_highlighting = false
+        },
+    }
+<
+
+
+COLORS DOESN’T MATCH PREVIEW SCREENSHOTS*catppuccin-faq-colors-doesn’t-match-preview-screenshots*
+
+Catppuccin requires true color support AKA terminals support the full range of
+16 million colors
+
+- Supported: iterm2 (macOS), kitty, wezterm, alacritty, tmux, …
+
+Full list of support terminals can be found here:
+<https://github.com/termstandard/colors#truecolor-support-in-output-devices>
+
+- Unsupported terminal: Terminal.app (macOS), Terminus, Terminology, …
+
+Full list of Unsupported terminals can be found here:
+<https://github.com/termstandard/colors#not-supporting-truecolor>
+
+
+FOR TMUX USERS ~
+
+- Enable true color support <https://gist.github.com/andersevenrud/015e61af2fd264371032763d4ed965b6> to fix the following abnormal colors <https://github.com/catppuccin/nvim/issues/415>:
+
+- Enable italic font support <https://gist.github.com/gyribeiro/4192af1aced7a1b555df06bd3781a722> to fix the following incorrect if, then, else, end highlights <https://github.com/catppuccin/nvim/issues/428>:
+
+
+==============================================================================
+9. Thanks to                                            *catppuccin-thanks-to*
+
+- Pocco81 <https://github.com/Pocco81>
+- nullchilly <https://github.com/nullchilly>
+
+==============================================================================
+10. Links                                                   *catppuccin-links*
+
+1. *image*: https://user-images.githubusercontent.com/1941785/220280749-c3ab52fb-9b8a-4f04-ab98-f8c1bb41f84b.png
+2. *image*: https://user-images.githubusercontent.com/13246770/224011118-dcf0f567-650a-4eb2-8be6-0af5cf435501.png
+
+Generated by panvimdoc <https://github.com/kdheepak/panvimdoc>
+
+vim:tw=78:ts=8:noet:ft=help:norl:

config/neovim/store/lazy-plugins/catppuccin-nvim/doc/tags

@@ -0,0 +1,15 @@
+catppuccin-compile	catppuccin.txt	/*catppuccin-compile*
+catppuccin-configuration	catppuccin.txt	/*catppuccin-configuration*
+catppuccin-customize-highlights	catppuccin.txt	/*catppuccin-customize-highlights*
+catppuccin-customize-highlights-get-catppuccin-colors	catppuccin.txt	/*catppuccin-customize-highlights-get-catppuccin-colors*
+catppuccin-customize-highlights-overwriting-colors	catppuccin.txt	/*catppuccin-customize-highlights-overwriting-colors*
+catppuccin-faq	catppuccin.txt	/*catppuccin-faq*
+catppuccin-faq-wrong-treesitter-highlights	catppuccin.txt	/*catppuccin-faq-wrong-treesitter-highlights*
+catppuccin-features	catppuccin.txt	/*catppuccin-features*
+catppuccin-installation	catppuccin.txt	/*catppuccin-installation*
+catppuccin-integrations	catppuccin.txt	/*catppuccin-integrations*
+catppuccin-links	catppuccin.txt	/*catppuccin-links*
+catppuccin-table-of-contents	catppuccin.txt	/*catppuccin-table-of-contents*
+catppuccin-thanks-to	catppuccin.txt	/*catppuccin-thanks-to*
+catppuccin-usage	catppuccin.txt	/*catppuccin-usage*
+catppuccin.txt	catppuccin.txt	/*catppuccin.txt*

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/barbecue/theme/catppuccin-frappe.lua

@@ -0,0 +1 @@
+return require "catppuccin.utils.barbecue" "frappe"

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/barbecue/theme/catppuccin-latte.lua

@@ -0,0 +1 @@
+return require "catppuccin.utils.barbecue" "latte"

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/barbecue/theme/catppuccin-macchiato.lua

@@ -0,0 +1 @@
+return require "catppuccin.utils.barbecue" "macchiato"

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/barbecue/theme/catppuccin-mocha.lua

@@ -0,0 +1 @@
+return require "catppuccin.utils.barbecue" "mocha"

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/barbecue/theme/catppuccin.lua

@@ -0,0 +1 @@
+return require "catppuccin.utils.barbecue"()

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/catppuccin/groups/editor.lua

@@ -0,0 +1,79 @@
+local M = {}
+
+function M.get()
+	return {
+		ColorColumn = { bg = C.surface0 }, -- used for the columns set with 'colorcolumn'
+		Conceal = { fg = C.overlay1 }, -- placeholder characters substituted for concealed text (see 'conceallevel')
+		Cursor = { fg = C.base, bg = C.text }, -- character under the cursor
+		lCursor = { fg = C.base, bg = C.text }, -- the character under the cursor when |language-mapping| is used (see 'guicursor')
+		CursorIM = { fg = C.base, bg = C.text }, -- like Cursor, but used when in IME mode |CursorIM|
+		CursorColumn = { bg = C.mantle }, -- Screen-column at the cursor, when 'cursorcolumn' is set.
+		CursorLine = {
+			bg = U.vary_color({ latte = U.lighten(C.mantle, 0.70, C.base) }, U.darken(C.surface0, 0.64, C.base)),
+		}, -- Screen-line at the cursor, when 'cursorline' is set.  Low-priority if forecrust (ctermfg OR guifg) is not set.
+		Directory = { fg = C.blue }, -- directory names (and other special names in listings)
+		EndOfBuffer = { fg = O.show_end_of_buffer and C.surface1 or C.base }, -- filler lines (~) after the end of the buffer.  By default, this is highlighted like |hl-NonText|.
+		ErrorMsg = { fg = C.red, style = { "bold", "italic" } }, -- error messages on the command line
+		VertSplit = { fg = O.transparent_background and C.surface1 or C.crust }, -- the column separating vertically split windows
+		Folded = { fg = C.blue, bg = O.transparent_background and C.none or C.surface1 }, -- line used for closed folds
+		FoldColumn = { fg = C.overlay0 }, -- 'foldcolumn'
+		SignColumn = { fg = C.surface1 }, -- column where |signs| are displayed
+		SignColumnSB = { bg = C.crust, fg = C.surface1 }, -- column where |signs| are displayed
+		Substitute = { bg = C.surface1, fg = U.vary_color({ latte = C.red }, C.pink) }, -- |:substitute| replacement text highlighting
+		LineNr = { fg = C.surface1 }, -- Line number for ":number" and ":#" commands, and when 'number' or 'relativenumber' option is set.
+		CursorLineNr = { fg = C.lavender }, -- Like LineNr when 'cursorline' or 'relativenumber' is set for the cursor line. highlights the number in numberline.
+		MatchParen = { fg = C.peach, bg = C.surface1, style = { "bold" } }, -- The character under the cursor or just before it, if it is a paired bracket, and its match. |pi_paren.txt|
+		ModeMsg = { fg = C.text, style = { "bold" } }, -- 'showmode' message (e.g., "-- INSERT -- ")
+		-- MsgArea = { fg = C.text }, -- Area for messages and cmdline, don't set this highlight because of https://github.com/neovim/neovim/issues/17832
+		MsgSeparator = {}, -- Separator for scrolled messages, `msgsep` flag of 'display'
+		MoreMsg = { fg = C.blue }, -- |more-prompt|
+		NonText = { fg = C.overlay0 }, -- '@' at the end of the window, characters from 'showbreak' and other characters that do not really exist in the text (e.g., ">" displayed when a double-wide character doesn't fit at the end of the line). See also |hl-EndOfBuffer|.
+		Normal = { fg = C.text, bg = O.transparent_background and C.none or C.base }, -- normal text
+		NormalNC = {
+			fg = C.text,
+			bg = (O.transparent_background and O.dim_inactive.enabled and C.dim)
+				or (O.dim_inactive.enabled and C.dim)
+				or (O.transparent_background and C.none)
+				or C.base,
+		}, -- normal text in non-current windows
+		NormalSB = { fg = C.text, bg = C.crust }, -- normal text in non-current windows
+		NormalFloat = { fg = C.text, bg = (O.transparent_background and vim.o.winblend == 0) and C.none or C.mantle }, -- Normal text in floating windows.
+		FloatBorder = { fg = C.blue },
+		FloatTitle = { fg = C.subtext0 }, -- Title of floating windows
+		Pmenu = {
+			bg = (O.transparent_background and vim.o.pumblend == 0) and C.none or U.darken(C.surface0, 0.8, C.crust),
+			fg = C.overlay2,
+		}, -- Popup menu: normal item.
+		PmenuSel = { bg = C.surface1, style = { "bold" } }, -- Popup menu: selected item.
+		PmenuSbar = { bg = C.surface1 }, -- Popup menu: scrollbar.
+		PmenuThumb = { bg = C.overlay0 }, -- Popup menu: Thumb of the scrollbar.
+		Question = { fg = C.blue }, -- |hit-enter| prompt and yes/no questions
+		QuickFixLine = { bg = C.surface1, style = { "bold" } }, -- Current |quickfix| item in the quickfix window. Combined with |hl-CursorLine| when the cursor is there.
+		Search = { bg = U.darken(C.sky, 0.30, C.base), fg = C.text }, -- Last search pattern highlighting (see 'hlsearch').  Also used for similar items that need to stand out.
+		IncSearch = { bg = U.darken(C.sky, 0.90, C.base), fg = C.mantle }, -- 'incsearch' highlighting; also used for the text replaced with ":s///c"
+		CurSearch = { bg = C.red, fg = C.mantle }, -- 'cursearch' highlighting: highlights the current search you're on differently
+		SpecialKey = { link = "NonText" }, -- Unprintable characters: text displayed differently from what it really is.  But not 'listchars' textspace. |hl-Whitespace|
+		SpellBad = { sp = C.red, style = { "undercurl" } }, -- Word that is not recognized by the spellchecker. |spell| Combined with the highlighting used otherwise.
+		SpellCap = { sp = C.yellow, style = { "undercurl" } }, -- Word that should start with a capital. |spell| Combined with the highlighting used otherwise.
+		SpellLocal = { sp = C.blue, style = { "undercurl" } }, -- Word that is recognized by the spellchecker as one that is used in another region. |spell| Combined with the highlighting used otherwise.
+		SpellRare = { sp = C.green, style = { "undercurl" } }, -- Word that is recognized by the spellchecker as one that is hardly ever used.  |spell| Combined with the highlighting used otherwise.
+		StatusLine = { fg = C.text, bg = O.transparent_background and C.none or C.mantle }, -- status line of current window
+		StatusLineNC = { fg = C.surface1, bg = O.transparent_background and C.none or C.mantle }, -- status lines of not-current windows Note: if this is equal to "StatusLine" Vim will use "^^^" in the status line of the current window.
+		TabLine = { bg = C.mantle, fg = C.overlay0 }, -- tab pages line, not active tab page label
+		TabLineFill = { bg = O.transparent_background and C.none or C.mantle }, -- tab pages line, where there are no labels
+		TabLineSel = { fg = C.green, bg = C.surface1 }, -- tab pages line, active tab page label
+		TermCursor = { fg = C.base, bg = C.rosewater }, -- cursor in a focused terminal
+		TermCursorNC = { fg = C.base, bg = C.overlay2 }, -- cursor in unfocused terminals
+		Title = { fg = C.blue, style = { "bold" } }, -- titles for output from ":set all", ":autocmd" etc.
+		Visual = { bg = C.surface1, style = { "bold" } }, -- Visual mode selection
+		VisualNOS = { bg = C.surface1, style = { "bold" } }, -- Visual mode selection when vim is "Not Owning the Selection".
+		WarningMsg = { fg = C.yellow }, -- warning messages
+		Whitespace = { fg = C.surface1 }, -- "nbsp", "space", "tab" and "trail" in 'listchars'
+		WildMenu = { bg = C.overlay0 }, -- current match in 'wildmenu' completion
+		WinBar = { fg = C.rosewater },
+		WinBarNC = { link = "WinBar" },
+		WinSeparator = { fg = O.transparent_background and C.surface1 or C.crust },
+	}
+end
+
+return M

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/catppuccin/groups/integrations/NormalNvim.lua

@@ -0,0 +1,15 @@
+local M = {}
+
+function M.get()
+	return {
+		MarkdownTask = { fg = C.teal, style = { "bold" } },
+		MarkdownTodo = { fg = C.flamingo, style = { "bold" } },
+		MarkdownNote = { fg = C.red, style = { "bold" } },
+		MarkdownSee = { fg = C.blue, style = { "bold" } },
+		MarkdownCheck = { fg = C.green, style = { "bold" } },
+		MarkdownURL = { fg = C.lavender, style = { "bold" } },
+		MarkdownExample = { fg = C.mauve, style = { "bold" } },
+	}
+end
+
+return M

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/catppuccin/groups/integrations/aerial.lua

@@ -0,0 +1,36 @@
+local M = {}
+
+function M.get()
+	return {
+		AerialLine = { fg = C.yellow, bg = C.none },
+		AerialGuide = { fg = C.overlay2 },
+		AerialBooleanIcon = { link = "@boolean" },
+		AerialClassIcon = { link = "@type" },
+		AerialConstantIcon = { link = "@constant" },
+		AerialConstructorIcon = { link = "@constructor" },
+		AerialFieldIcon = { link = "@field" },
+		AerialFunctionIcon = { link = "@function" },
+		AerialMethodIcon = { link = "@method" },
+		AerialNamespaceIcon = { link = "@namespace" },
+		AerialNumberIcon = { link = "@number" },
+		AerialOperatorIcon = { link = "@operator" },
+		AerialTypeParameterIcon = { link = "@type" },
+		AerialPropertyIcon = { link = "@property" },
+		AerialStringIcon = { link = "@string" },
+		AerialVariableIcon = { link = "@constant" },
+		AerialEnumMemberIcon = { link = "@field" },
+		AerialEnumIcon = { link = "@type" },
+		AerialFileIcon = { link = "@text.uri" },
+		AerialModuleIcon = { link = "@namespace" },
+		AerialPackageIcon = { link = "@namespace" },
+		AerialInterfaceIcon = { link = "@type" },
+		AerialStructIcon = { link = "@type" },
+		AerialEventIcon = { link = "@type" },
+		AerialArrayIcon = { link = "@constant" },
+		AerialObjectIcon = { link = "@type" },
+		AerialKeyIcon = { link = "@type" },
+		AerialNullIcon = { link = "@type" },
+	}
+end
+
+return M

config/neovim/store/lazy-plugins/catppuccin-nvim/lua/catppuccin/groups/integrations/alpha.lua

@@ -0,0 +1,13 @@
+local M = {}
+
+function M.get()
+	return {
+		AlphaShortcut = { fg = C.green },
+		AlphaHeader = { fg = C.blue },
+		AlphaHeaderLabel = { fg = C.peach },
+		AlphaButtons = { fg = C.lavender },
+		AlphaFooter = { fg = C.yellow, style = { "italic" } },
+	}
+end
+
+return M