Add pterodactyl config

Pterodactyl/configuration.nix

@@ -0,0 +1,226 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+{
+  config,
+  pkgs,
+  ...
+}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+    <home-manager/nixos>
+
+    # Include Services
+    # ./services/pterodactyl.nix
+  ];
+
+  # Bootloader.
+  boot = {
+    loader.grub.enable = true;
+    loader.grub.device = "/dev/sda";
+    loader.grub.useOSProber = true;
+
+    # NOTE: I think this needs a separate EFI partition?
+    # loader.systemd-boot = {
+    #   enable = true;
+    #   configurationLimit = 5;
+    #   editor = false;
+    #   # canTouchEfiVariables = true;
+    #   # efiSysMountPoint = "/boot";
+    # };
+  };
+
+  # hardware = {
+  #   opengl = {
+  #     enable = true;
+  #     driSupport = true;
+  #     driSupport32Bit = true;
+  #   };
+
+  #   nvidia = {
+  #     modesetting.enable = true;
+  #     powerManagement.enable = false; # Experimental option, maybe this is the reason fileflows fails after some time?
+  #     open = false;
+  #     nvidiaSettings = false;
+  #   };
+  # };
+
+  networking = {
+    hostName = "pterodactyl"; # Define your hostname.
+    # wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+    # Configure network proxy if necessary
+    # proxy.default = "http://user:password@proxy:port/";
+    # proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+    # Enable networking
+    networkmanager.enable = true;
+
+    interfaces.ens18.ipv4.addresses = [{
+      address = "192.168.86.35";
+      prefixLength = 24;
+    }];
+    defaultGateway = "192.168.86.5";
+    nameservers = [
+      "192.168.86.5"
+    ];
+  };
+
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "de_DE.UTF-8";
+    LC_IDENTIFICATION = "de_DE.UTF-8";
+    LC_MEASUREMENT = "de_DE.UTF-8";
+    LC_MONETARY = "de_DE.UTF-8";
+    LC_NAME = "de_DE.UTF-8";
+    LC_NUMERIC = "de_DE.UTF-8";
+    LC_PAPER = "de_DE.UTF-8";
+    LC_TELEPHONE = "de_DE.UTF-8";
+    LC_TIME = "de_DE.UTF-8";
+  };
+
+  # Configure console keymap
+  console.keyMap = "us-acentos";
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.christoph = {
+    isNormalUser = true;
+    description = "Christoph";
+    extraGroups = ["networkmanager" "wheel"];
+    shell = pkgs.fish;
+    packages = with pkgs; [];
+  };
+
+  home-manager.users.christoph = {pkgs, ...}: {
+    home.packages = with pkgs; [
+      lazygit
+      keychain
+      alejandra
+      nnn
+      busybox
+
+      docker-compose
+    ];
+
+    programs = {
+      fish = {
+        enable = true;
+      };
+
+      git = {
+        enable = true;
+        userEmail = "christoph.urlacher@protonmail.com";
+        userName = "Christoph Urlacher";
+      };
+
+      keychain = {
+        enable = true;
+        enableFishIntegration = true;
+        agents = ["ssh"];
+        keys = ["id_ed25519"];
+      };
+
+      starship = {
+        enable = true;
+        enableFishIntegration = true;
+      };
+
+      yt-dlp = {
+        enable = true;
+      };
+    };
+
+    home.stateVersion = "23.05";
+  };
+
+  virtualisation = {
+    docker = {
+      enable = true;
+      autoPrune.enable = true;
+      # enableNvidia = true;
+      # rootless = {
+      #   enable = true;
+      #   setSocketVariable = true;
+      # };
+    };
+    oci-containers.backend = "docker";
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    wget
+    helix
+    git
+  ];
+
+  programs = {
+    firejail.enable = true;
+    fish.enable = true;
+    git.enable = true;
+    neovim.enable = true;
+    # fuse.userAllowOther = true;
+  };
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  services = {
+    # Configure keymap in X11
+    xserver = {
+      layout = "us";
+      xkbVariant = "altgr-intl";
+      # videoDrivers = ["nvidia"];
+    };
+
+    # Trims the journal if it gets too large
+    journald.extraConfig = ''
+      SystemMaxUse=50M
+    '';
+
+    # Enable the OpenSSH daemon.
+    openssh.enable = true;
+
+    ntp.enable = true;
+    qemuGuest.enable = true;
+  };
+
+  networking.firewall = {
+    # Open ports in the firewall.
+    allowedTCPPorts = [
+    ];
+    allowedUDPPorts = [
+    ];
+    # Or disable the firewall altogether.
+    enable = true;
+
+    trustedInterfaces = [
+      "docker0"
+    ];
+  };
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "23.05"; # Did you read the comment?
+}

Pterodactyl/hardware-configuration.nix

@@ -0,0 +1,37 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  config,
+  lib,
+  pkgs,
+  modulesPath,
+  ...
+}: {
+  imports = [
+    (modulesPath + "/profiles/qemu-guest.nix")
+  ];
+
+  boot.initrd.availableKernelModules = ["ata_piix" "uhci_hcd" "virtio_pci" "virtio_scsi" "sd_mod" "sr_mod"];
+  boot.initrd.kernelModules = [];
+  boot.kernelModules = ["kvm-intel"];
+  boot.extraModulePackages = [];
+
+  fileSystems = {
+    "/" = {
+      device = "/dev/disk/by-uuid/2d1b1f62-f008-4562-906e-5a63d854b18b";
+      fsType = "ext4";
+    };
+  };
+
+  swapDevices = [];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}