christoph/fail
1
Fork 0
Code Actions Packages Releases Activity

debuggers: import openocd-0.7.0

Browse Source 
Initial check-in of openocd-0.7.0 as it can be downloaded from
http://sourceforge.net/projects/openocd/files/openocd/0.7.0/

Any modifications will follow.

Change-Id: I6949beaefd589e046395ea0cb80f4e1ab1654d55
This commit is contained in:
Lars Rademacher
2013-10-21 00:50:02 +02:00
parent 85fffe007e
commit 83d72a091e
1148 changed files with 571445 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
debuggers/openocd/tcl/interface/ftdi/axm0432.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Axiom axm0432
#
# http://www.axman.com
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Symphony SoundBite"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0c2b
ftdi_layout_signal nTRST -data 0x0800
ftdi_layout_signal nSRST -data 0x0400

22
debuggers/openocd/tcl/interface/ftdi/calao-usb-a9260-c01.cfg Normal file
View File

@ -0,0 +1,22 @@
#
# CALAO Systems USB-A9260-C01
#
# http://www.calao-systems.com/
#
echo "WARNING!"
echo "This file was not tested with real interface, but is assumed to work as this"
echo "interface uses the same layout as configs that were verified. Please report your"
echo "experience with this file to openocd-devel mailing list, so it could be marked"
echo "as working or fixed."
interface ftdi
ftdi_device_desc "USB-A9260"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
script interface/calao-usb-a9260.cfg
script target/at91sam9260minimal.cfg

22
debuggers/openocd/tcl/interface/ftdi/calao-usb-a9260-c02.cfg Normal file
View File

@ -0,0 +1,22 @@
#
# CALAO Systems USB-A9260-C02
#
# http://www.calao-systems.com/
#
echo "WARNING!"
echo "This file was not tested with real interface, but is assumed to work as this"
echo "interface uses the same layout as configs that were verified. Please report your"
echo "experience with this file to openocd-devel mailing list, so it could be marked"
echo "as working or fixed."
interface ftdi
ftdi_device_desc "USB-A9260"
ftdi_vid_pid 0x0403 0x6001
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
script interface/calao-usb-a9260.cfg
script target/at91sam9260minimal.cfg

13
debuggers/openocd/tcl/interface/ftdi/cortino.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# Hitex Cortino
#
# http://www.hitex.com/index.php?id=cortino
#
interface ftdi
ftdi_device_desc "Cortino"
ftdi_vid_pid 0x0640 0x0032
ftdi_layout_init 0x0108 0x010b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200

21
debuggers/openocd/tcl/interface/ftdi/dlp-usb1232h.cfg Normal file
View File

@ -0,0 +1,21 @@
#
# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module
#
# http://www.dlpdesign.com/usb/usb1232h.shtml
#
# Schematics for OpenOCD usage:
# http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on schematics and code"
echo "in ft2232.c. Please report your experience with this file to openocd-devel"
echo "mailing list, so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040

23
debuggers/openocd/tcl/interface/ftdi/dp_busblaster.cfg Normal file
View File

@ -0,0 +1,23 @@
#
# Dangerous Prototypes - Bus Blaster
#
# The Bus Blaster has a configurable buffer between the FTDI FT2232H and the
# JTAG header which allows it to emulate various debugger types. It comes
# configured as a JTAGkey device.
#
# http://dangerousprototypes.com/docs/Bus_Blaster
#
echo "WARNING!"
echo "This file was not tested with real interface, but is assumed to work as this"
echo "interface uses the same layout as configs that were verified. Please report your"
echo "experience with this file to openocd-devel mailing list, so it could be marked"
echo "as working or fixed."
interface ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800

26
debuggers/openocd/tcl/interface/ftdi/flossjtag-noeeprom.cfg Normal file
View File

@ -0,0 +1,26 @@
#
# FlossJTAG
#
# http://github.com/esden/floss-jtag
#
# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used
# for newer versions of Floss-JTAG with empty or not populated EEPROM. If you
# have several Floss-JTAG connected you have to use the USB ID to select a
# specific one.
#
# If you have a Floss-JTAG WITH EEPROM that is programmed, use the
# flossjtag.cfg file.
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040

29
debuggers/openocd/tcl/interface/ftdi/flossjtag.cfg Normal file
View File

@ -0,0 +1,29 @@
#
# FlossJTAG
#
# http://github.com/esden/floss-jtag
#
# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the
# existence of an EEPROM on Floss-JTAG containing a name. If you have several
# Floss-JTAG adapters connected you can use the serial number to select a
# specific device.
#
# If your Floss-JTAG does not have an EEPROM, or the EEPROM is empty, use the
# flossjtag-noeeprom.cfg file.
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_device_desc "FLOSS-JTAG"
#ftdi_serial "FJ000001"
ftdi_layout_init 0x0008 0x180b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi_layout_signal LED -data 0x0800
ftdi_layout_signal LED2 -data 0x1000

19
debuggers/openocd/tcl/interface/ftdi/flyswatter.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# TinCanTools Flyswatter
#
# http://www.tincantools.com/product.php?productid=16134
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on schematics and code"
echo "in ft2232.c. Please report your experience with this file to openocd-devel"
echo "mailing list, so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Flyswatter"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0818 0x0cfb
ftdi_layout_signal nTRST -data 0x0010
ftdi_layout_signal nSRST -oe 0x0020
ftdi_layout_signal LED -data 0x0c00

14
debuggers/openocd/tcl/interface/ftdi/flyswatter2.cfg Normal file
View File

@ -0,0 +1,14 @@
#
# TinCanTools Flyswatter2
#
# http://www.tincantools.com/product.php?productid=16134
#
interface ftdi
ftdi_device_desc "Flyswatter2"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0538 0x057b
ftdi_layout_signal LED -ndata 0x0400
ftdi_layout_signal nTRST -data 0x0010
ftdi_layout_signal nSRST -data 0x0020 -noe 0x0100

18
debuggers/openocd/tcl/interface/ftdi/hilscher_nxhx10_etm.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Hilscher NXHX 10-ETM
#
# http://de.hilscher.com/products_details_hardware.html?p_id=P_4ce145a5983e6
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "NXHX 10-ETM"
ftdi_vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200

18
debuggers/openocd/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Hilscher NXHX 500-ETM
#
# http://de.hilscher.com/files_design/8/NXHX500-ETM_description_Rev01_EN.pdf
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "NXHX 500-ETM"
ftdi_vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200

18
debuggers/openocd/tcl/interface/ftdi/hilscher_nxhx500_re.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Hilscher NXHX 500-RE
#
# http://de.hilscher.com/products_details_hardware.html?p_id=P_461ff2053bad1&bs=20
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "NXHX 500-RE"
ftdi_vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200

18
debuggers/openocd/tcl/interface/ftdi/hilscher_nxhx50_etm.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Hilscher NXHX 50-ETM
#
# http://de.hilscher.com/files_design/8/NXHX50-ETM_description_Rev01_EN.pdf
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "NXHX 50-ETM"
ftdi_vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200

18
debuggers/openocd/tcl/interface/ftdi/hilscher_nxhx50_re.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Hilscher NXHX 50-RE
#
# http://de.hilscher.com/products_details_hardware.html?p_id=P_483c0f582ad36&bs=20
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "NXHX50-RE"
ftdi_vid_pid 0x0640 0x0028
ftdi_layout_init 0x0308 0x030b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200

15
debuggers/openocd/tcl/interface/ftdi/hitex_lpc1768stick.cfg Normal file
View File

@ -0,0 +1,15 @@
#
# Hitex LPC1768-Stick
#
# http://www.hitex.com/?id=1602
#
interface ftdi
ftdi_device_desc "LPC1768-Stick"
ftdi_vid_pid 0x0640 0x0026
ftdi_layout_init 0x0388 0x038b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0080 -noe 0x200

13
debuggers/openocd/tcl/interface/ftdi/hitex_str9-comstick.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# Hitex STR9-comStick
#
# http://www.hitex.com/index.php?id=383
#
interface ftdi
ftdi_device_desc "STR9-comStick"
ftdi_vid_pid 0x0640 0x002c
ftdi_layout_init 0x0108 0x010b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200

18
debuggers/openocd/tcl/interface/ftdi/icebear.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Section5 ICEBear
#
# http://section5.ch/icebear
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "ICEbear JTAG adapter"
ftdi_vid_pid 0x0403 0xc140
ftdi_layout_init 0x0028 0x002b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0020

14
debuggers/openocd/tcl/interface/ftdi/jtag-lock-pick_tiny_2.cfg Normal file
View File

@ -0,0 +1,14 @@
#
# DISTORTEC JTAG-lock-pick Tiny 2
#
# http://www.distortec.com
#
interface ftdi
ftdi_device_desc "JTAG-lock-pick Tiny 2"
ftdi_vid_pid 0x0403 0x8220
ftdi_layout_init 0x8c28 0xff3b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi_layout_signal LED -ndata 0x8000

13
debuggers/openocd/tcl/interface/ftdi/jtagkey.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# Amontec JTAGkey
#
# http://www.amontec.com/jtagkey.shtml
#
interface ftdi
ftdi_device_desc "Amontec JTAGkey"
ftdi_vid_pid 0x0403 0xcff8
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800

13
debuggers/openocd/tcl/interface/ftdi/jtagkey2.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# Amontec JTAGkey2
#
# http://www.amontec.com/jtagkey2.shtml
#
interface ftdi
ftdi_device_desc "Amontec JTAGkey-2"
ftdi_vid_pid 0x0403 0xcff8
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800

13
debuggers/openocd/tcl/interface/ftdi/jtagkey2p.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# Amontec JTAGkey2P
#
# http://www.amontec.com/jtagkey2p.shtml
#
interface ftdi
ftdi_device_desc "Amontec JTAGkey-2P"
ftdi_vid_pid 0x0403 0xcff8
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800

14
debuggers/openocd/tcl/interface/ftdi/kt-link.cfg Normal file
View File

@ -0,0 +1,14 @@
#
# Kristech KT-Link
#
# http://www.kristech.eu
#
interface ftdi
ftdi_device_desc "KT-LINK"
ftdi_vid_pid 0x0403 0xbbe2
ftdi_layout_init 0x8c28 0xff3b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
ftdi_layout_signal LED -data 0x8000

20
debuggers/openocd/tcl/interface/ftdi/lisa-l.cfg Normal file
View File

@ -0,0 +1,20 @@
#
# Lisa/L
#
# http://paparazzi.enac.fr/wiki/Lisa
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on schematics and code"
echo "in ft2232.c. Please report your experience with this file to openocd-devel"
echo "mailing list, so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Lisa/L"
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 1
ftdi_layout_init 0x0008 0x180b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
ftdi_layout_signal LED -data 0x1800

23
debuggers/openocd/tcl/interface/ftdi/luminary-icdi.cfg Normal file
View File

@ -0,0 +1,23 @@
#
# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
# In-Circuit Debug Interface (ICDI) Board
#
# Essentially all Luminary debug hardware is the same, (with both
# JTAG and SWD support compatible with ICDI boards. This ICDI adapter
# configuration is JTAG-only, but the same hardware handles SWD too.
#
# This is a discrete ftdi based debug board which supports ARM's
# JTAG/SWD connectors in both backwards-compatible 20-pin format and
# in the new-style compact 10-pin. There's also an 8-pin connector
# with serial port support. It's included with LM3S9B9x eval boards.
#
# http://www.luminarymicro.com/products/ek-lm3s9b90.html
# http://www.luminarymicro.com/products/ek-lm3s9b92.html
#
interface ftdi
ftdi_device_desc "Luminary Micro ICDI Board"
ftdi_vid_pid 0x0403 0xbcda
ftdi_layout_init 0x00a8 0x00eb
ftdi_layout_signal nSRST -noe 0x0020

19
debuggers/openocd/tcl/interface/ftdi/luminary-lm3s811.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# Luminary Micro Stellaris LM3S811 Evaluation Kit
#
# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
#
# NOTE: this is only for boards *before* Rev C, which adds support
# for SWO tracing with ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN signals.
# The "evb_lm3s811" layout doesn't set up those signals.
#
# Rev C boards work more like the other Stellaris eval boards. They
# need to use the "luminary_icdi" layout to work correctly.
#
interface ftdi
ftdi_device_desc "LM3S811 Evaluation Board"
ftdi_vid_pid 0x0403 0xbcd9
ftdi_layout_init 0x0088 0x008b
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020

32
debuggers/openocd/tcl/interface/ftdi/luminary.cfg Normal file
View File

@ -0,0 +1,32 @@
#
# Luminary Micro Stellaris Evaluation Kits
#
# http://www.luminarymicro.com/products/evaluation_kits.html
#
# There are a number of evaluation kits for Stellaris Cortex-M3 chips.
# Currently they all bundle ftdi based debug support. When that is
# used (instead of an external adapter), use this config file in one
# of these two modes:
#
# - Eval board debug ... debug of the Stellaris chip via port A.
#
# - Other board debug ... same thing, but the board acts as a debug
# adapter for another board (using a standard ARM JTAG connector).
# The Stellaris chip stays in reset.
#
# Those support both JTAG and SWD. SWD is an ARM-only two-wire debug
# protocol; in 2009, OpenOCD does not support SWD.
#
# Port B of the ftdi chip is normally used as a serial link to the
# Stellaris chip. On most boards (but not older LM3S811 eval boards),
# when SWD is used Port B may instead be used to read low-bandwidth
# "SWO trace" data, including so-called "printf style" output from
# firmware via the ITM module as well as profile data.
#
interface ftdi
ftdi_device_desc "Stellaris Evaluation Board"
ftdi_vid_pid 0x0403 0xbcd9
ftdi_layout_init 0x00a8 0x00eb
ftdi_layout_signal nSRST -noe 0x0020

17
debuggers/openocd/tcl/interface/ftdi/minimodule.cfg Normal file
View File

@ -0,0 +1,17 @@
#
# FTDI MiniModule
#
# http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT2232H_Mini_Module.pdf
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "FT2232H MiniModule"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0018 0x05fb
ftdi_layout_signal nSRST -data 0x0020

19
debuggers/openocd/tcl/interface/ftdi/neodb.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# Openmoko USB JTAG/RS232 adapter
#
# http://wiki.openmoko.org/wiki/Debug_Board_v3
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on schematics and code"
echo "in ft2232.c. Please report your experience with this file to openocd-devel"
echo "mailing list, so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Debug Board for Neo1973"
ftdi_vid_pid 0x1457 0x5118
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400
ftdi_layout_signal nNOR_WP -data 0x0010 -oe 0x0010

19
debuggers/openocd/tcl/interface/ftdi/ngxtech.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# NGX ARM USB JTAG
#
# http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30
#
echo "WARNING!"
echo "This file was not tested with real interface, but is assumed to work as this"
echo "interface uses the same layout as configs that were verified. Please report your"
echo "experience with this file to openocd-devel mailing list, so it could be marked"
echo "as working or fixed."
interface ftdi
ftdi_device_desc "NGX JTAG"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400

14
debuggers/openocd/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg Normal file
View File

@ -0,0 +1,14 @@
#
# Olimex ARM-USB-OCD-H
#
# http://www.olimex.com/dev/arm-usb-ocd-h.html
#
interface ftdi
ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-OCD-H"
ftdi_vid_pid 0x15ba 0x002b
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal LED -data 0x0800

14
debuggers/openocd/tcl/interface/ftdi/olimex-arm-usb-ocd.cfg Normal file
View File

@ -0,0 +1,14 @@
#
# Olimex ARM-USB-OCD
#
# http://www.olimex.com/dev/arm-usb-ocd.html
#
interface ftdi
ftdi_device_desc "Olimex OpenOCD JTAG"
ftdi_vid_pid 0x15ba 0x0003
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal LED -data 0x0800

20
debuggers/openocd/tcl/interface/ftdi/olimex-arm-usb-tiny-h.cfg Normal file
View File

@ -0,0 +1,20 @@
#
# Olimex ARM-USB-TINY-H
#
# http://www.olimex.com/dev/arm-usb-tiny-h.html
#
echo "WARNING!"
echo "This file was not tested with real interface, but is assumed to work as this"
echo "interface uses the same layout as configs that were verified. Please report your"
echo "experience with this file to openocd-devel mailing list, so it could be marked"
echo "as working or fixed."
interface ftdi
ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
ftdi_vid_pid 0x15ba 0x002a
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal LED -data 0x0800

14
debuggers/openocd/tcl/interface/ftdi/olimex-jtag-tiny.cfg Normal file
View File

@ -0,0 +1,14 @@
#
# Olimex ARM-USB-TINY
#
# http://www.olimex.com/dev/arm-usb-tiny.html
#
interface ftdi
ftdi_device_desc "Olimex OpenOCD JTAG TINY"
ftdi_vid_pid 0x15ba 0x0004
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nSRST -oe 0x0200
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal LED -data 0x0800

19
debuggers/openocd/tcl/interface/ftdi/oocdlink.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# Joern Kaipf's OOCDLink
#
# http://www.joernonline.de/contrexx2/cms/index.php?page=126
#
echo "WARNING!"
echo "This file was not tested with real interface, but is assumed to work as this"
echo "interface uses the same layout as configs that were verified. Please report your"
echo "experience with this file to openocd-devel mailing list, so it could be marked"
echo "as working or fixed."
interface ftdi
ftdi_device_desc "OOCDLink"
ftdi_vid_pid 0x0403 0xbaf8
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400

17
debuggers/openocd/tcl/interface/ftdi/opendous_ftdi.cfg Normal file
View File

@ -0,0 +1,17 @@
#
# Opendous
#
# http://code.google.com/p/opendous/wiki/JTAG
#
# According to the website, it is similar to jtagkey, but it uses channel B
# (and it has a different pid number).
#
interface ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 1
ftdi_layout_init 0x0c08 0x0f1b
ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800

13
debuggers/openocd/tcl/interface/ftdi/openocd-usb-hs.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# embedded projects openocd usb adapter v3
#
# http://shop.embedded-projects.net/index.php?module=artikel&action=artikel&id=14
#
interface ftdi
ftdi_device_desc "Dual RS232-HS"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400

13
debuggers/openocd/tcl/interface/ftdi/openocd-usb.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# Hubert Hoegl's USB to JTAG
#
# http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html
#
interface ftdi
ftdi_device_desc "Dual RS232"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400

19
debuggers/openocd/tcl/interface/ftdi/openrd.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# Marvell OpenRD
#
# http://www.marvell.com/products/embedded_processors/developer/kirkwood/openrd.jsp
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "OpenRD JTAGKey FT2232D"
ftdi_vid_pid 0x0403 0x9e90
ftdi_channel 1
ftdi_layout_init 0x0608 0x0f1b
ftdi_layout_signal nTRST -data 0x0200
ftdi_layout_signal nSRST -noe 0x0400

21
debuggers/openocd/tcl/interface/ftdi/redbee-econotag.cfg Normal file
View File

@ -0,0 +1,21 @@
#
# Redwire Redbee-Econotag
#
# http://www.redwirellc.com/store/node/1
#
# The Redbee-Econotag has an onboard FT2232H with:
# - FT2232H channel A wired to mc13224v JTAG
# - FT2232H channel B wired to mc13224v UART1
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0c08 0x0c2b
ftdi_layout_signal nTRST -data 0x0800
ftdi_layout_signal nSRST -data 0x0400

22
debuggers/openocd/tcl/interface/ftdi/redbee-usb.cfg Normal file
View File

@ -0,0 +1,22 @@
#
# Redwire Redbee-USB
#
# http://www.redwirellc.com
#
# The Redbee-USB has an onboard FT2232H with:
# - FT2232H channel B wired to mc13224v JTAG
# - FT2232H channel A wired to mc13224v UART1
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 1
ftdi_layout_init 0x0c08 0x0c2b
ftdi_layout_signal nTRST -data 0x0800
ftdi_layout_signal nSRST -data 0x0400

19
debuggers/openocd/tcl/interface/ftdi/sheevaplug.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# Marvel SheevaPlug Development Kit
#
# http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "SheevaPlug JTAGKey FT2232D"
ftdi_vid_pid 0x9e88 0x9e8f
ftdi_channel 1
ftdi_layout_init 0x0608 0x0f1b
ftdi_layout_signal nTRST -data 0x0200
ftdi_layout_signal nSRST -noe 0x0400

18
debuggers/openocd/tcl/interface/ftdi/signalyzer-lite.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Xverve Signalyzer LITE (DT-USB-SLITE)
#
# http://www.signalyzer.com
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Signalyzer LITE"
ftdi_vid_pid 0x0403 0xbca1
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020

18
debuggers/openocd/tcl/interface/ftdi/signalyzer.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# Xverve Signalyzer Tool (DT-USB-ST)
#
# http://www.signalyzer.com
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on code in ft2232.c."
echo "Please report your experience with this file to openocd-devel mailing list,"
echo "so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Signalyzer"
ftdi_vid_pid 0x0403 0xbca0
ftdi_layout_init 0x0008 0x000b
ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020

13
debuggers/openocd/tcl/interface/ftdi/stm32-stick.cfg Normal file
View File

@ -0,0 +1,13 @@
#
# Hitex STM32-PerformanceStick
#
# http://www.hitex.com/index.php?id=340
#
interface ftdi
ftdi_device_desc "STM32-PerformanceStick"
ftdi_vid_pid 0x0640 0x002d
ftdi_layout_init 0x0388 0x038b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0080 -noe 0x200

18
debuggers/openocd/tcl/interface/ftdi/turtelizer2-revB.cfg Normal file
View File

@ -0,0 +1,18 @@
#
# egnite Turtelizer 2 rev B (with SRST only)
#
# http://www.ethernut.de/en/hardware/turtelizer/index.html
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on schematics and code"
echo "in ft2232.c. Please report your experience with this file to openocd-devel"
echo "mailing list, so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Turtelizer JTAG/RS232 Adapter"
ftdi_vid_pid 0x0403 0xbdc8
ftdi_layout_init 0x0008 0x0c5b
ftdi_layout_signal nSRST -oe 0x0040
ftdi_layout_signal LED -data 0x0c00

19
debuggers/openocd/tcl/interface/ftdi/turtelizer2-revC.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# egnite Turtelizer 2 revC (with TRST and SRST)
#
# http://www.ethernut.de/en/hardware/turtelizer/index.html
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on schematics and code"
echo "in ft2232.c. Please report your experience with this file to openocd-devel"
echo "mailing list, so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Turtelizer JTAG/RS232 Adapter"
ftdi_vid_pid 0x0403 0xbdc8
ftdi_layout_init 0x0008 0x0c7b
ftdi_layout_signal nTRST -oe 0x0020
ftdi_layout_signal nSRST -oe 0x0040
ftdi_layout_signal LED -ndata 0x0c00

19
debuggers/openocd/tcl/interface/ftdi/vpaclink.cfg Normal file
View File

@ -0,0 +1,19 @@
#
# Voipac VPACLink
#
# http://voipac.com/27M-JTG-000
#
echo "WARNING!"
echo "This file was not tested with real interface, but is assumed to work as this"
echo "interface uses the same layout as configs that were verified. Please report your"
echo "experience with this file to openocd-devel mailing list, so it could be marked"
echo "as working or fixed."
interface ftdi
ftdi_device_desc "VPACLink"
ftdi_vid_pid 0x0403 0x6010
ftdi_layout_init 0x0508 0x0f1b
ftdi_layout_signal nTRST -data 0x0200 -noe 0x0100
ftdi_layout_signal nSRST -data 0x0800 -noe 0x0400

23
debuggers/openocd/tcl/interface/ftdi/xds100v2.cfg Normal file
View File

@ -0,0 +1,23 @@
#
# Texas Instruments XDS100v2
#
# http://processors.wiki.ti.com/index.php/XDS100#XDS100v2_Features
#
echo "WARNING!"
echo "This file was not tested with real interface, it is based on schematics and code"
echo "in ft2232.c. Please report your experience with this file to openocd-devel"
echo "mailing list, so it could be marked as working or fixed."
interface ftdi
ftdi_device_desc "Texas Instruments Inc.XDS100 Ver 2.0"
ftdi_vid_pid 0x0403 0xa6d0
ftdi_layout_init 0x0838 0x597b
ftdi_layout_signal nTRST -data 0x0010
ftdi_layout_signal nSRST -oe 0x0100
ftdi_layout_signal nEMU_EN -data 0x0020
ftdi_layout_signal nEMU0 -data 0x0040
ftdi_layout_signal nEMU1 -data 0x1000
ftdi_layout_signal PWR_RST -data 0x0800
ftdi_layout_signal LOOPBACK -data 0x4000